Investigation of performance enhancement of solar still incorporated with Gallus gallus domesticus cascara as sensible heat storage material

In this research work, the conventional single slope still (CSS) with egg shells of breed Gallus gallus domesticus cascara as sensible heat storage (SHS) material are studied experimentally to enhance the yield. In this experimental investigation, the proposed single slope still (PSS) with SHS material was made in comparison with the CSS to evaluate the productivity of fresh water under the same ambient conditions. Comparatively, this PSS has higher thermal conductivity than the CSS. The yield obtained from the PSS is 2.46 L/m², while the yield from the CSS is 2.07 L/m². The average rate at which the rise of output fresh water obtained from the PSS is 18% more than the fresh water output obtained from the CSS. The daily energy efficiency of the PSS is 26.07%, and for the CSS, it is only 22.25%. The daily exergy efficiency of the PSS is 2.36%, and for the CSS, it is only 1.67%. Since using the egg shell will employ as organic waste management and modification in this still is economical, less initial, and maintenance cost.

     

Efficacy of feed improvement in livestock farming to offset climate variations in Punjab,Pakistan: silage as an example

Environmental Science and Pollution Research - Globally, climate change is an alarming threat to the livestock industry. Such changes in the climate can also adversely affect the returns of...     

Strategies for the municipal waste management system to take advantage of carbon trading under competing policies: The role of energy from waste in Sydney

Climate change is a driving force behind some recent environmental legislation around the world. Greenhouse gas emission reduction targets have been set in many industrialised countries. A change in current practices of almost all greenhouse-emitting industrial sectors is unavoidable, if the set targets is to be achieved. Although, waste disposal contributes around 3% of the total greenhouse gas emissions in Australia (mainly due to fugitive methane emissions from landfills), the carbon credit and trading scheme set to start in 2010 presents significant challenges and opportunities to municipal solid waste practitioners. Technological advances in waste management, if adopted properly, allow the municipal solid waste sector to act as carbon sink, hence earning tradable carbon credits. However, due to the complexity of the system and its inherent uncertainties, optimizing it for carbon credits may worsen its performance under other criteria. We use an integrated, stochastic multi-criteria decision-making tool that we developed earlier to analyse the carbon credit potential of Sydney municipal solid waste under eleven possible future strategies. We find that the changing legislative environment is likely to make current practices highly non-optimal and increase pressures for a change of waste management strategy.     

Assessment of the impacts of climate change and variability on water resources and use,food security,and economic welfare in Iran

Climate change influences the agricultural sector by reducing available water resources, thereby influencing income, consumer and producer surplus, and crop prices. So, it is necessary to have a comprehensive integrated method to measure the effects of these changes on natural resources and social conditions. The present study aims to use the positive mathematical programming method to discover the trend and conditions of groundwater resources, agricultural water use, food security, and economic welfare of the agricultural sector in Iran. To this end, data for the period 2000–2015 was used under four different scenarios of normal climate change, climate change, climate variability, and concurrent climate change The results showed that the mean agricultural water use will amount to 35,103.6, 26,533.8, 35,216, and 26,510.7 million m³ and the mean decline in the reserves of aquifers will amount to 4422.22, 11,165.6, 4438.25, and 11,267.4 million m³ under the scenarios, respectively. With respect to food security, the net farm revenue will be 314,560, 248,753, 315,427, and 248,574 billion IRR, respectively. The mean crop price per ton will reach 905.3, 1141.8, 904, and 1142.8 million IRR, respectively. The mean consumer surplus will be 172,107.7, 166,450, 172,024, and 166,403 billion IRR and the mean producer surplus will be 419,959.2, 395,380, 419,751, and 395,204 billion IRR, respectively. Based on the results, to reduce the adverse impacts of climate change on different studied aspects, it is necessary to change policymaking in the water and agricultural sectors, especially regarding the shift from traditional agricultural water allocation to its market-based allocation and to change planting pattern.

     

Small-scale on-site treatment of fecal matter: comparison of treatments for resource recovery and sanitization

Environmental Science and Pollution Research - On-site small-scale sanitation is common in rural areas and areas without infrastructure, but the treatment of the collected fecal matter can be...     

Heavy metal contamination from mining sites in South Morocco: 1. Use of a biotest to assess metal toxicity of tailings and soils

Our work was conducted to investigate the heavy metal toxicity of tailings and soils collected from five metal mines located in the south of Morocco. We used the MetPAD biotest Kit which detects the toxicity specifically due to the heavy metals in environmental samples. This biotest initially developed to assess the toxicity of aquatic samples was adapted to the heterogeneous physico-chemical conditions of anthropogenic soils. Contrasted industrial soils were collected from four abandoned mines (A, B, C and E) and one mine (D) still active. The toxicity test was run concurrently with chemical analyses on the aqueous extracts of tailings materials and soils in order to assess the potential availability of heavy metals. Soil pH was variable, ranging from very acidic (pH 2.6) to alkaline values (pH 8.0-8.8). The tailings from polymetallic mines (B and D) contained very high concentrations of Zn (38,000-108,000 mg kg(-1)), Pb (20,412-30,100 mg kg(-1)), Cu (2,019-8,635 mg kg(-1)) and Cd (148-228 mg kg(-1)). Water-extractable metal concentrations (i.e., soil extracts) were much lower but were highly toxic as shown by the MetPAD test, except for soils from mines A, E and site C3 from mine C. The soil extracts from mine D were the most toxic amongst all the soils tested. On this site, the toxicity of soil water extracts was mainly due to high concentrations of Zn (785-1,753 mg l(-1)), Cu (1.8-82 mg l(-1)) and Cd (2.0-2.7 mg l(-1)). The general trend observed was an increase in metal toxicity measured by the biotest with increasing available metal contents in tailings materials and soils. Therefore, the MetPAD test can be used as a rapid and sensitive predictive tool to assess the heavy metal availability in soils highly contaminated by mining activities.     

Application of life cycle assessment for hospital solid waste management: A case study

This study was meant to determine environmental aspects of hospital waste management scenarios using a life cycle analysis approach. The survey for this study was conducted at the largest hospital in a major city of Pakistan. The hospital was thoroughly analyzed from November 2014 to January 2015 to quantify its wastes by category. The functional unit of the study was selected as 1 tonne of disposable solid hospital waste. System boundaries included transportation of hospital solid waste and its treatment and disposal by landfilling, incineration, composting, and material recycling methods. These methods were evaluated based on their greenhouse gas emissions. Landfilling and incineration turned out to be the worst final disposal alternatives, whereas composting and material recovery displayed savings in emissions. An integrated system (composting, incineration, and material recycling) was found as the best solution among the evaluated scenarios. This study can be used by policymakers for the formulation of an integrated hospital waste management plan.

Implications: This study deals with environmental aspects of hospital waste management scenarios. It is an increasing area of concern in many developing and resource-constrained countries of the world. The life cycle analysis (LCA) approach is a useful tool for estimation of greenhouse gas emissions from different waste management activities. There is a shortage of information in existing literature regarding LCA of hospital wastes. To the best knowledge of the authors this work is the first attempt at quantifying the environmental footprint of hospital waste in Pakistan.     

Wetting mechanism and morphological adaptation; leaf rolling enhancing atmospheric water acquisition in wheat crop—a review

Environmental Science and Pollution Research - Several plant species such as grasses are dominant in many habitats including arid and semi-arid areas. These species survive in these regions by...     

Evaluation of Different Scales for Measurement of Perceived Physical Strain During Performance of Manual Tasks

The main objective of this study was to evaluate different scales of perceived strain during the performance of various physical tasks. A total of 52 male and female participants took part in 4 experiments to achieve the study objective. The results suggest that a bipolar comfort-discomfort scale is a more appropriate instrument than a discomfort scale for assessing cumulative physical stresses at work, especially at the beginning of the shift. For assessing discomfort at the end of the work shift, a unipolar scale may also be used. On the basis of the obtained results, red, green, and yellow zones are suggested to establish priorities for work redesign efforts in ergonomic control programs.     

Multiple dimensions of work-related risk factors and their relationship to work ability among industrial workers in Iran

Objectives. The present study was designed to investigate the simultaneous effects of physical, psychosocial and other work-related risk factors on the work ability index (WAI) score among industrial workers. Methods. This study used a cross-sectional design with a questionnaire survey. A total of 280 workers were included in the study. Data were collected using three questionnaires including the Persian version of the WAI, the Persian version of the job content questionnaire and an author-developed measure (to assess work-related factors, health-related factors and socio-demographic characteristics). Results. The majority of the participants were young, but they had poor WAI scores (mean 37.3?±?6.4) and 44.3% of them had poor or moderate work ability. Occupational accidents and injuries were found to be the strongest predictors of WAI scores. Additionally, there was a strong association between WAI scores and supervisor support, skill discretion, occupational training, sleep quality, work nature and educational level. Conclusions. Intervention programs should focus on improving supervisor support, sleep quality, job skills and knowledge and on decreasing physical and mental work demands. Additionally, implementing a comprehensive occupational health and ergonomics program for controlling and reducing hazardous working environments and occupational injury rates should be considered.