Accumulation of cyanobacterial toxins in freshwater "seafood" and its consequences for public health: a review

This review summarizes and discusses the current understanding of human exposure to cyanobacterial toxins in "seafood" collected from freshwater and coastal areas. The review consists of three parts: (a) the existing literature on concentrations of cyanobacterial toxins in seafood is reviewed, and the likelihood of bioaccumulation discussed; (b) we derive cyanotoxin doses likely to occur through seafood consumption and propose guideline values for seafood and compare these to guidelines for drinking water; and (c) we discuss means to assess, control or mitigate the risks of exposure to cyanotoxins through seafood consumption. This is discussed in the context of two specific procedures, the food specific HACCP-approach and the water-specific Water Safety Plan approach by the WHO. Risks of exposure to cyanotoxins in food are sometimes underestimated. Risk assessments should acknowledge this and investigate the partitioning of exposure between drinking-water and food, which may vary depending on local circumstances.     

Modelling assessment of regional groundwater contamination due to historic smelter emissions of heavy metals

Historic emissions from ore smelters typically cause regional soil contamination. We developed a modelling approach to assess the impact of such contamination on groundwater and surface water load, coupling unsaturated zone leaching modelling with 3D groundwater transport modelling. Both historic and predictive modelling were performed, using a mass balance approach for three different catchments in the vicinity of three smelters. The catchments differ in their hydrology and geochemistry. The historic modelling results indicate that leaching to groundwater is spatially very heterogeneous due to variation in soil characteristics, in particular soil pH. In the saturated zone, cadmium is becoming strongly retarded due to strong sorption at neutral pH, even though the reactivity of the sandy sediments is low. A comparison between two datasets (from 1990 to 2002) on shallow groundwater and modelled concentrations provided a useful verification on the level of statistics of "homogeneous areas" (areas with comparable land use, soil type and geohydrological situation) instead of comparison at individual locations. While at individual locations observations and the model varies up to two orders of magnitude, for homogeneous areas, medians and ranges of measured concentrations and the model results are similar. A sensitivity analysis on metal input loads, groundwater composition and sediment geochemistry reveals that the best available information scenario based on the median value of input parameters for the model predicts the range in observed concentrations very well. However, the model results are sensitive to the sediment contents of the reactive components (organic matter, clay minerals and iron oxides). Uncertainty in metal input loads and groundwater chemistry are of lesser importance. Predictive modelling reveals a remarkable difference in geochemical and hydrological controls on subsurface metal transport at catchment-scale. Whether the surface water load will peak within a few decades or continue to increase until after 2050 depends on the dominant land use functions in the areas, their hydrology and geochemical build-up.     

Successful combination of remediation techniques at a former silver factory

A residential area that was formerly part of a silver factory site severely contaminated with chlorinated solvents was remediated using an in situ electro‐bioreclamation technique. Electro‐bioreclamation is a method for heating soil and groundwater combined with soil vapor and low‐yield groundwater extraction and enhanced reductive dechlorination (ERD). During the first two years of remediation in the source area (the intensive phase), a total of 80 kg of volatile organic compounds (VOCs) was removed by heating combined with ERD. After another two years of ERD in the source and plume areas (the attenuation phase), the VOC concentrations were reduced to a level below 100 μg/L in groundwater. Given these satisfying results, electro‐reclamation in combination with ERD turned out to be a successful in situ remediation technique for removing VOCs. © 2006Wiley Periodicals, Inc.     

Reduction targets and abatement costs of developing countries resulting from global and developed countries’ reduction targets by 2050

The European Union (EU) has advocated an emission reduction target for developed countries of 80% to 95% below the 1990 level by 2050, and a global reduction target of 50%. Developing countries have resisted the inclusion of these targets in both the UN Framework Convention on Climate Change Copenhagen Accord and Cancún Agreements. This paper analyses what these targets would imply for emission targets, abatement costs and energy consumption of developing countries, taking into account the conditional emission reduction pledges for 2020. An 80% reduction target for developed countries would imply more stringent per capita emission targets for developing countries than developed countries by 2050. Moreover, abatement costs of developing countries would be higher than those of developed countries. An 85% to 90% reduction target for developed countries would result in similar per capita emission targets and abatement costs for developed and developing countries by 2050. Total reduction targets for developing countries would range from 30% to 40% below 2005 levels by 2050 and from 30% to 35% above 2005 levels by 2030. The 2030 target for China would be 40% to 45% above 2005 levels, compared to a target for the EU of 45% to 50% below 1990 and for the United States of America (USA) 30% to 35% below 1990. Emission target trajectories for Brazil, South Africa and China would peak before 2025 and for India by around 2025. From the analysis, we may conclude that from the viewpoint of developing countries either developed countries increase their target above 85%, and/or make substantial side-payments.     

Aquatic herbivores facilitate the emission of methane from wetlands

Wetlands are significant sources of atmospheric methane. Methane produced by microbes enters roots and escapes to the atmosphere through the shoots of emergent wetland plants. Herbivorous birds graze on helophytes, but their effect on methane emission remains unknown. We hypothesized that grazing on shoots of wetland plants can modulate methane emission from wetlands. Diffusive methane emission was monitored inside and outside bird exclosures, using static flux chambers placed over whole vegetation and over single shoots. Both methods showed significantly higher methane release from grazed vegetation. Surface-based diffusive methane emission from grazed plots was up to five times higher compared to exclosures. The absence of an effect on methane-cycling microbial processes indicated that this modulating effect acts on the gas transport by the plants. Modulation of methane emission by animal-plant-microbe interactions deserves further attention considering the increasing bird populations and changes in wetland vegetation as a consequence of changing land use and climate change.     

A conceptual model of the social–ecological system of nature-based solutions in urban environments

This article provides a perspective on nature-based solutions. First, the argument is developed that nature-based solutions integrate social and ecological systems. Then, theoretical considerations relating to relational values, multifunctionality, transdisciplinarity, and polycentric governance are briefly outlined. Finally, a conceptual model of the social–ecological system of nature-based solutions is synthesised and presented. This conceptual model comprehensively defines the social and ecological external and internal systems that make up nature-based solutions, and identifies theoretical considerations that need to be addressed at different stages of their planning and implementation The model bridges the normative gaps of existing nature-based solution frameworks and could be used for consistent, comprehensive, and transferable comparisons internationally. The theoretical considerations addressed in this article inform practitioners, policymakers, and researchers about the essential components of nature-based solutions. The conceptual model can facilitate the identification of social and ecological interconnections within nature-based solutions and the range of stakeholders and disciplines involved.     

Exposure to particulate matter in traffic: A comparison of cyclists and car passengers

Emerging evidence suggests that short episodes of high exposure to air pollution occur while commuting. These events can result in potentially adverse health effects. We present a quantification of the exposure of car passengers and cyclists to particulate matter (PM). We have simultaneously measured concentrations (PNC, PM2.5 and PM10) and ventilatory parameters (minute ventilation (VE), breathing frequency and tidal volume) in three Belgian locations (Brussels, Louvain-la-Neuve and Mol) for 55 persons (38 male and 17 female). Subjects were first driven by car and then cycled along identical routes in a pairwise design. Concentrations and lung deposition of PNC and PM mass were compared between biking trips and car trips.Mean bicycle/car ratios for PNC and PM are close to 1 and rarely significant. The size and magnitude of the differences in concentrations depend on the location which confirms similar inconsistencies reported in literature. On the other hand, the results from this study demonstrate that bicycle/car differences for inhaled quantities and lung deposited dose are large and consistent across locations. These differences are caused by increased VE in cyclists which significantly increases their exposure to traffic exhaust. The VE while riding a bicycle is 4.3 times higher compared to car passengers. This aspect has been ignored or severely underestimated in previous studies. Integrated health risk evaluations of transport modes or cycling policies should therefore use exposure estimates rather than concentrations.     

Monitoring and Modelling of Ammonia Concentrations and Deposition in Agricultural Areas of The Netherlands

Passive samplers were used from 1996 to 1999 in a dense network to monitorthe concentrations of ammonia in air, in four agricultural areas in The Netherlands. To show representative patterns, sampling was not made within 50 m of livestock buildings and stores. The concentration of ammonia varies typically between 10 and 40 g m^-3 within a few kilometres in these areas. The interpretation of the measurements was supported by calculations with OPS, a Lagrangian dispersion model. Model calculations were based on a high-resolution database that included estimates of the ammonia emission of each farm in the area and emissions from surface application of manure at a 250 × 250 m scale. The model underestimated the observed ammonia concentrations by nearly a factor of two over most of the area. This result was attributed to underestimation of the ammonia emission in the models. And the ammonia emissions from field application of manure seem to be seriously underestimated. A detailed analysis of model results and measurements showed that the observed decrease of the ammonia concentration in the study period was partly due to changes in meteorological conditions during the study period and partly due to the reduced amount of manure applied in 1998.     

Constitutive and herbivore‐induced volatiles in pear,alder and hawthorn trees

Summary. Qualitative and quantitative differences among pear cultivars were found in constitutive and Cacopsylla-induced volatiles, depending on experimental treatment of the trees (i.e., uninfested and partly or completely infested by psyllids). Blend differences were also found between pear cultivars and wild-type pear, alder and hawthorn–the latter trees are frequently present in pear orchard hedgerows. ?Interesting differences were found in the presence of methyl salicylate and (E,E)-α-farnesene, two compounds previously found to mediate attraction of predatory bugs towards psyllid-infested pear trees. Methyl salicylate is expressed constitutively and is induced systemically by infestation in the whole plant of all four cultivars. (E,E)-α-farnesene on the other hand showed also systemic induction in Bartlett, NY10355 and Beurré Hardy, but in partially infested Conference trees it was induced locally, only in herbivore-damaged leaves. No methyl salicylate or (E,E)-α-farnesene were identified in honeydew. In field collected headspace samples of alder leaves infested by aphids and leaf beetles we found methyl salicylate but no (E,E)-α-farnesene, whereas in uninfested hawthorn neither were identified. Insight in the variability of damage-related pear volatiles will have important implications for integrated pest management in the field. Received 27 August 2002; accepted 28 November 2002 R1D=" Correspondence to: Petru Scutareanu, e-mail:scuterea@science.uva.nl