Use of modified hydroxy-aluminum bentonites for chromium(III) removal from solutions

The retention of chromium(III) from a 2000ppm chromium basic sulfate and tannery waste solution at pH 4.5 using modified hydroxy-aluminum bentonites (OH-Al bentonites) as adsorbents was studied. OH-Al bentonite was prepared by mixing clay with a hydrolyzed commercial chlorohydroxy Al solution. The modified Al bentonites were obtained by (a) a treatment with 0.5M sodium chloride and (b) a treatment with a Na-hexametaphosphate solution (HMP) after adding sodium chloride. The effect of heating the adsorbents at 100, 500, 700 and 800 degrees C on Cr retention as a function of time was also analyzed. Cr retention by modified OH-Al bentonite with HMP increased with time (up to 100mgCr/g) where modified OH-Al bentonite was twice that of untreated bentonite. The relatively high uptake of metal from the salt solution by modified OH-Al bentonite treated at 800 degrees C, in which a complete interlayer collapse occurred, indicated the importance of the contribution of external surface sites to the retention capacity. The maximum Cr uptake from a water waste was 24mg/g, due to interferences and different chromium species in the industrial solution.     

Effect of different types of clouds on surface UV-B and total solar irradiance at southern mid-latitudes: CMF determinations at Córdoba,Argentina

The effect of clouds on total and UV-B irradiance in Córdoba, Argentina, was studied employing the TUV 4.1 model and measurements obtained with YES UVB-1 and YES TSP-700 radiometers, and a spectral radiometer Ocean Optics USB-4000. The experimental measurements were selected from a 10 years dataset (1999–2008). Clouds were classified by direct observation as cirrus, cumulus, and stratocumulus. The broadband Cloud Modification Factors (CMFs) have been calculated in the range of the total and the UV-B radiation for these types of clouds. The relations between them were analyzed for a significant number of days. The broadband CMF values range from around 0.1 up to 1.25, depending on the wavelength interval and on the cloud type. The CMF_UVB versus CMF_T plots for different clouds have shown good adjustments and significant differences, which allows the distinction between them.Stratocumulus clouds show large attenuations and a linear relation with larger slopes as the solar zenith angle (SZA) increases. For this type of clouds an average slope of (1.0 ± 0.2) was found. The relation between the CMF for cumulus clouds is linear with an average slope of (0.61 ± 0.01). No dependence with the SZA was observed. Cirrus clouds plots show an exponential behavior with fit parameters equal to (0.48 ± 0.08) and (0.68 ± 0.15). However, when small SZA intervals are analyzed a linear relation is found. When the relations between the CMF were similar (cumulus and cirrus), the spectral variation in the UV range (320–420 nm) of a modified CMF (CMF_m) was used to distinguish them. Hence, the spectral differences among the three types of clouds have been also analyzed for several days and SZA. Here, it was found that the effect of cirrus is essentially wavelength independent while cumulus and stratocumulus clouds show exponential decay relations but with different ordinates.In the analyzed relations the microphysical properties of the clouds seem to determine its behavior while the optical thickness leads to the different degrees of attenuation.The results obtained in this work are in agreement with those found for other authors.     

Production of zeolitic materials in pilot scale based on coal ash for phosphate and potassium adsorption in order to obtain fertilizer

Environmental Science and Pollution Research - The use of different types of zeolites (X, Na-P1, and 4A) synthesized by different methods and scales were tested in this work to adsorb nutrients...     

Efficient adsorption of carbon dioxide and methane on activated carbon prepared from glycerol with potassium acetate

In the context of global warming and the energy crisis, emissions to the atmosphere of greenhouse gases such as carbon dioxide (CO₂) and methane (CH₄) should be reduced, and biomethane from landfill biogas should be recycled. For this, there is a need for affordable technologies to capture carbon dioxide, such as adsorption of biogas on activated carbon produced from industrial wastes. Here we converted glycerol, a largely available by-product from biodiesel production, into activated carbon with the first use of potassium acetate as an activating agent. We studied adsorption of CO₂ and CH₄ on activated carbon. The results show that activated carbon adsorb CO₂ up to 20% activated carbon weight at 250 kPa, and 9% at atmospheric pressure. This is explained by high specific surface areas up to 1115 m²g⁻¹. Moreover, selectivity values up to 10.6 are observed for the separation of CO₂/CH₄. We also found that the equivalent CO₂ emissions from activated carbon synthesis are easily neutralized by their use, even in a small biogas production unit.

     

Is Green Chemistry a feasible tool for the implementation of a circular economy?

Environmental Science and Pollution Research - The main goal of this research is to evaluate the contributions of Green Chemistry as a potential tool to drive the transition to circularity. For...     

Fledgling sex ratio variation and future reproduction probability in Montagu's harrier, Circus pygargus

I studied patterns of sex ratio variation in 543 fledglings from 192 broods of Montagu's harriers Circus pygargus (1992-1998) in Madrid, central Spain, to determine whether offspring sex ratio was adjusted according to variables influencing future reproduction. Fledgling sex ratio variation was related to estimates of food availability during the pre-laying period, with more females produced in years of higher food availability. This variation was related to the probability that females, but not males, were recruited to the breeding population and were recruited at younger ages, if fledged in good food years. Furthermore, the relationship between food and sex ratio was only significant for the first two nestlings in each brood, and only nestlings from first and second ranks benefited from good breeding conditions to advance their age of first breeding. Results presented here differ from other published data for the same species. Geographical variation in observed sex ratio might be explained by differences between populations in factors influencing age of first breeding or other demographic variables.     

A methodology for creating greenways through multidisciplinary sustainable landscape planning

This research proposes a methodology for defining greenways via sustainable planning. This approach includes the analysis and discussion of culture and natural processes that occur in the landscape. The proposed methodology is structured in three phases: eco-cultural analysis; synthesis and diagnosis; and proposal.An interdisciplinary approach provides an assessment of the relationships between landscape structure and landscape dynamics, which are essential to any landscape management or land use. The landscape eco-cultural analysis provides a biophysical, dynamic (geomorphologic rate), vegetation (habitats from directive 92/43/EEC) and cultural characterisation. The knowledge obtained by this analysis then supports the definition of priority actions to stabilise the landscape and the management measures for the habitats. After the analysis and diagnosis phases, a proposal for the development of sustainable greenways can be achieved.This methodology was applied to a study area of the Azambuja Municipality in the Lisbon Metropolitan Area (Portugal). The application of the proposed methodology to the study area shows that landscape stability is crucial for greenway users in order to appreciate the landscape and its natural and cultural elements in a sustainable and healthy way, both by cycling or by foot. A balanced landscape will increase the value of greenways and in return, they can develop socio-economic activities with benefits for rural communities.     

Influence of temperature on the chemical removal of 3-methylbutanal,trans-2-methyl-2-butenal,and 3-methyl-2-butenal by OH radicals in the troposphere

Absolute rate coefficients for the gas-phase reactions of OH radical with 3-methylbutanal (k₁), trans-2-methyl-2-butenal (k₂), and 3-methyl-2-butenal (k₃) have been obtained with the pulsed laser photolysis/laser-induced fluorescence technique. Gas-phase concentration of aldehydes was measured by UV absorption spectroscopy at 185 nm. Experiments were performed over the temperature range of 263–353 K at total pressures of helium between 46.2 and 100 Torr. No pressure dependence of all k_i (i = 1–3) was observed at all temperatures. In contrast, a negative temperature dependence of k_i (i.e., k_i increases when temperature decreases) was observed in that T range. The resulting Arrhenius expressions (±2σ) are: k₁(T) = (5.8 ± 1.7)×10^?12 exp{(499 ± 94)/T} cm³ molecule^?1 s^?1, k₂(T)=(6.9 ± 0.9)×10^?12 exp{(526 ± 42)/T} cm³ molecule^?1 s^?1, k₃(T)=(5.6 ± 1.2)×10^?12 exp{(666 ± 54)/T} cm³ molecule^?1 s^?1.The tropospheric lifetimes derived from the above OH-reactivity trend are estimated to be higher for 3-methylbutanal than those for the unsaturated aldehydes. A comparison of the tropospheric removal of these aldehydes by OH radicals with other homogeneous degradation routes leads to the conclusion that this reaction can be the main homogeneous removal pathway. However, photolysis of these aldehydes in the actinic region (λ > 290 nm) could play an important role along the troposphere, particularly for 3-methyl-2-butenal. This process could compete with the OH reaction for 3-methylbutanal or be negligible for trans-2-methyl-2-butenal in the troposphere.     

Characterisation of the airborne pollen spectrum in Guadalajara (central Spain) and estimation of the potential allergy risk

Aerobiological research into airborne pollen diversity and seasonal variations in pollen counts has become increasingly important over recent decades due to the growing incidence of asthma, rhinitis and other pollen-related allergic conditions. Airborne pollen in Guadalajara (Castilla-La Mancha, Spain) was studied over a 6-year period (2008–2013) using a Hirst-type volumetric spore trap. The highest pollen concentrations were recorded from February to June, coinciding with the pollen season of the pollen types that most contribute to the local airborne pollen spectrum: Cupressaceae (32.2 %), Quercus (15.1 %), Platanus (13.2 %), Olea (8.3 %), Populus (7.8 %) and Poaceae (7.2 %). These are therefore critical months for allergy sufferers. The pollen calendar was typically Mediterranean and comprised 25 pollen types. Between January and March, Cupressaceae pollen concentrations exceeded allergy risk thresholds on 38 days. Other woody species such as Olea and Platanus have a shorter pollen season, and airborne concentrations exceeded allergy risk thresholds on around 13 days in each case. Poaceae pollen concentrations attained allergy risk levels on 26 days between May and July. Other highly allergenic pollen types included Urticaceae and Chenopodiaceae-Amaranthaceae, though these are less abundant than other pollen types in Guadalajara and did not exceed risk thresholds on more than 3 and 5 days, respectively.