Simple model for estimating dry deposition velocity of ozone and its destruction in a polluted nocturnal boundary layer

Determining the destructions of both ozone and odd oxygen, O_x, in the nocturnal boundary layer (NBL) is important to evaluate the regional ozone budget and overnight ozone accumulation. This work develops a simple method to determine the dry deposition velocity of ozone and its destruction at a polluted nocturnal boundary layer. The destruction of O_x can also be determined simultaneously. The method is based on O₃ and NO₂ profiles and their surface measurements. Linkages between the dry deposition velocities of O₃ and NO₂ and between the dry deposition loss of O_x and its chemical loss are constructed and used. Field measurements are made at an agricultural site to demonstrate the application of the model. The model estimated nocturnal O₃ dry deposition velocities from 0.13 to 0.19 cm s^?1, very close to those previously obtained for similar land types. Additionally, dry deposition and chemical reactions account for 60 and 40% of the overall nocturnal ozone loss, respectively; ozone dry deposition accounts for 50% of the overall nocturnal loss of O_x, dry deposition of NO₂ accounts for another 20%, and chemical reactions account for the remaining 30%. The proposed method enables the use of measurements made in typical ozone field studies to evaluate various nocturnal destructions of O₃ and O_x in a polluted environment.     

核电安全

<正>2010年6月16日国家核安全局有关负责人向媒体通报,大亚湾核电站二号机组反应堆中的一根燃料棒包壳出现微小裂纹,其影响仅限于封闭的核反应堆一回路系统中,放射性物质未进入环境,未对环境造成影响和损害。该负责人指出,大亚湾核电站二号机组核反应堆一回路冷却     

MoS2 quantum dots based MoS2/HKUST-1 composites for the highly efficient catalytic oxidation of elementary mercury

Due to the ever-tightening regulation on mercury emission in recent decades, there is an urgent need to develop novel materials for the removal of elemental mercury at coal-fired power plants. In this study, a series of MoS₂ quantum dots (QDs)-based MoS₂/HKUST-1 composite materials were prepared. It is found that MoS₂ QDs were encapsulated by HKUST-1 and enhanced the crystallinity and specific surface area of HKUST-1. The MoS₂/HKUST-1 showed excellent performance in catalytic oxidation of Hg⁰ as compared with pristine HKUST-1. It is found that surface layer of lattice oxygens is active and participates in Hg⁰ oxidation, while the consumption of surface oxygens then leads to the formation of oxygen vacancies on the surface. These vacancies are effective in the adsorption and dissociation of O₂, which subsequently participates in the oxidation of Hg⁰. Moreover, the study on the influence of commonly seen gas components, such as SO₂, NO, NH₃ and H₂O, etc., on Hg⁰ oxidation demonstrated that synergistic effects exist among these gas species. It is found that the presence of NO promotes the oxidation of Hg⁰ using oxygen as the oxidant.     

杭州西湖底泥释磷的初步研究

为了探讨杭州西湖底泥的释磷状况,通过对钱塘江引水前后西湖水体中总磷浓度的测定,根据物质平衡原则,求得西湖底泥平均释磷速率为3.49mg/m²·d,全湖年释磷量达7.22t。此外用实验室模拟法对底泥释磷的影响因素进行研究,结果表明,温度、pH值和扰动均能不同程度地对底泥释磷产生作用,其中尤以pH值的改变和扰动影响较大;结果还显示,微生物在底泥释磷过程中具有重要的作用。     

Reduction and characterization of bioaerosols in a wastewater treatment station via ventilation

Bioaerosols from wastewater treatment processes are a significant subgroup of atmospheric aerosols. In the present study,airborne microorganisms generated from a wastewater treatment station(WWTS) that uses an oxidation ditch process were diminished by ventilation.Conventional sampling and detection methods combined with cloning/sequencing techniques were applied to determine the groups,concentrations,size distributions,and species diversity of airborne microorganisms before and after ventilation. There were 3021 ± 537 CFU/m3 of airborne bacteria and 926 ± 132 CFU/m3 of airborne fungi present in the WWTS bioaerosol.Results showed that the ventilation reduced airborne microorganisms significantly compared to the air in the WWTS. Over 60% of airborne bacteria and airborne fungi could be reduced after4 hr of air exchange. The highest removal(92.1% for airborne bacteria and 89.1% for fungi) was achieved for 0.65–1.1 μm sized particles. The bioaerosol particles over 4.7 μm were also reduced effectively. Large particles tended to be lost by gravitational settling and small particles were generally carried away,which led to the relatively easy reduction of bioaerosol particles0.65–1.1 μm and over 4.7 μm in size. An obvious variation occurred in the structure of the bacterial communities when ventilation was applied to control the airborne microorganisms in enclosed spaces.     

一起直流单极连续3次闭锁故障仿真分析

宁夏电网目前已接入3回直流,其中第1回直流为±660 kV接入,容量为4 GW;第2回直流为±800 kV,容量为8 GW;第3回直流为±800 kV,容量为10 GW,并正式形成了送端直流群。随着特高压直流的接入,宁夏电网发生直流故障的次数逐渐增多。针对第2回直流某次典型单极连续3次闭锁故障,详细介绍了事故发生的过程和故障前后宁夏电网运行方式及系统动态特性的变化情况。利用PSASP程序建立宁夏电网仿真模型,还原了故障前电网运行方式,并仿真再现了故障后的电网动态过程。通过仿真与实测结果的对比,进一步明确了直流故障期间电网特性的变化情况,同时验证了仿真模型的准确性。     

磁絮凝处理废水工艺条件的响应曲面法优化研究

以聚硅硫酸铁(PFSS)为絮凝剂、磁流体为磁种,采用磁絮凝法处理模拟废水。在正交实验基础上,利用Matlab软件进行响应曲面分析,研究磁絮凝法处理模拟废水的各因素间具有的交互作用关系。回归拟合结果表明最佳工艺条件为:PFSS加入量36.8g/L,模拟废水pH7.4,磁种加入量14.7mg/L,搅拌转速266r/min。在最佳工艺条件下进行实验,TP去除率为97.70%。     

混凝与Fenton联用处理垃圾渗滤液的效能及成本

为对混凝/Fenton工艺与Fenton/混凝工艺处理垃圾渗滤液的效果和成本进行比较,分别对年轻渗滤液和老龄渗滤液原液按照混凝/Fenton工艺与Fenton/混凝工艺2种技术路线进行处理。实验结果表明,Fenton试剂对年轻垃圾渗滤液和老龄垃圾渗滤液COD去除率最高的反应条件为pH=3.5、H2O2和Fe2+的摩尔比为6、H2O2和渗滤液原液的COD质量比为3、反应时间4 h;在PAC与渗滤液原液的COD质量比为0.6时,PAC混凝对渗滤液原液的COD去除率最高。在对渗滤液COD去除率最高的Fenton反应和PAC混凝反应条件下,混凝/Fenton工艺对年轻渗滤液和老龄渗滤液的COD去除率分别为90.56%和86.56%;Fenton/混凝工艺对年轻渗滤液和老龄渗滤液的COD去除率分别为89.99%和85.99%,2种技术路线对渗滤液COD的去除率相差不大,但先PAC混凝后Fenton氧化工艺比先Fenton后混凝工艺每t节省62.6元,是更优化的渗滤液处理工艺。     

厌氧消化过程中温度骤降对酸化活动抑制性的研究

对于厌氧消化过程的酸化阶段,反应器内温度的快速下降将对碳水化合物的分解和产酸活动产生明显抑制。当温度依次从30℃下降到25、20和15℃时,反应器内厌氧微生物数量呈缓慢减少趋势,受温度影响不大;但是,厌氧酸化过程却明显表现出受到每一次骤然降温的影响,其碳水化合物的平均去除率随温度骤降从92%依次降低为84%、72%和25%,且最低分别达到78%、52%和10%。研究还表明,随着温度的骤降,厌氧酸化活动将立即受到强烈抑制,并需要一定的时间来恢复以适应发酵温度的改变。     

Fenton氧化法深度处理抗生素废水二级出水

采用Fenton氧化法对青霉素和土霉素混合废水二级处理出水进行深度处理,通过正交和单因素实验研究了废水初始反应pH值、H2O2投加量、Fe2+/H2O2摩尔比及反应时间等因素对废水处理效果的影响。实验结果表明,Fenton氧化法处理的最佳反应条件为:初始pH值4、H2O2(30%)投加量50 mL/L、Fe2+/H2O2摩尔比1/20和反应时间60 min,处理后出水COD小于120 mg/L,COD去除率在75%以上,急性毒性(HgCl2毒性当量)小于0.07 mg/L,满足《发酵类制药工业水污染物排放标准》(GB21903-2008)表2标准要求。