The Spanish project on energy and environment: ENMA

The project ENMA assesses the atmospheric pollution caused by the transformation and consumption of energy. The project is in the following stages: (a) estimation of annual overall average emissions; (b) estimation of annual average concentrations of pollutants; and (c) estimation of doses. Estimation of annual overall average emissions is estimated, separately, for urban areas and point sources. Concentrations of pollutants are obtained for urban areas and point-sources by means of two different gaussian models. Finally, doses are calculated assuming that the effects of all pollutants are linear at low doses. Doses for each pollutant, and doses for exposure to several combined pollutants, are defined. The doses on population are also defined, assuming that the significance of pollution depends on the number of people exposed.     

Natural radiation exposure in the Campo Arañuelo region in the surroundings of Almaraz nuclear power station (Spain)

During 1998 regional surveys were conducted to evaluate natural radiation exposure of people in the vicinity of the six Spanish nuclear power stations. Indoor radon, external gamma dose rates outdoors and indoors and radioactivity in soil were measured in these surveys. The highest mean annual effective dose to the population was found in the surroundings of the Almaraz nuclear power plant in the province of Cáceres and was mainly due to the presence of high radon concentrations in homes. In order to make a more accurate assessment of the dose coming from the radon in this area, a new and more extensive surgery on indoor radon with a total of 380 measurements was carried out in 2000 in the Campo Ara?uelo region around the Almaraz nuclear power station. From the results obtained in this survey, a population-weighted mean annual effective dose from radon exposure of 1.7 mSv y(-1), 44% lower than that previously reported in 1998, was estimated for the whole Campo Ara?uelo region. The maximum dose value due to radon exposure, about 4 mSv y(-1), was reached in the so-called La Vera area located in the north of this region. The relationship between the indoor radon concentrates experimentally measured, the geological characteristics of this geographic area and the information provided by the radiation map of the Spanish MARNA Project is also analyzed, confirming that La Vera area should be considered as a high radon level area.     

Factors controlling measurements of radon mass exhalation rate

Radon mass exhalation rate of soil samples was measured using an exhalation chamber of 10 dm(3) volume and a Lucas cell. The results show that mass of sample, grain size and water content influence the radon mass exhalation rate. For soil of (226)Ra activity concentration about 2500 Bq kg(-1) and samples within the range from 0.20 kg to 0.50 kg, the radon mass exhalation rate values are higher than those for samples of other masses. The observed radon exhalation rate is an inverse function of the average grain size. At the water content about 6% by weight, the radon mass exhalation rate reaches maximum, then it decreases with both increasing and decreasing of the water content in the sample.     

Utilization of magnetic and electrostatic separation in the recycling of printed circuit boards scrap

The progress of the technology is directly related to the growth of production and consumption of electrical/electronics equipment, especially of personal computers. This type of equipment has a relatively short average lifetime, 2-3 years. The amount of defective or obsolete equipment has been increasing substantially; consequently its disposition and/or recycling should be studied. In this work, printed circuit boards, which are used in personal computers, were studied in order to recover the metals in the circuit boards through mechanical processing, such as crushing, screening, as well as magnetic and electrostatic separation. The results obtained demonstrate the feasibility of using these processes to separate metal fractions from polymers and ceramics, and that it is possible to obtain a fraction concentrated in metals containing more than 50% on average of copper, 24% of tin and 8% of lead.     

Avoidance behaviour of Enchytraeus albidus: effects of benomyl, carbendazim, phenmedipham and different soil types

Enchytraeids are typical inhabitants of many soils, contributing to vital processes of this environmental compartment. Indirectly they are involved in regulating the degradation of organic matter, as well as improving the pore structure of the soil. Due to their behaviour, they are able to avoid unfavourable environmental conditions. Avoidance tests with enchytraeids, initially developed with earthworms by several authors, are quick and easy to perform. With these tests a first assessment of the toxicity of a (contaminated or spiked) soil is possible in just 48 h by using the reaction of the enchytraeids as measurement endpoint. In this period of time the organisms can choose between the control soil and the other soil (a contaminated or spiked or another soil with different physico-chemical properties). In the tests reported here, the enchytraeids were exposed to control soils spiked with the fungicides Benomyl and Carbendazim and the herbicide Phenmedipham. Several chemical concentrations were tested in order to evaluate the avoidance behaviour to toxic substances. In fact, often these short-term screening tests gave results showing avoidance at concentrations in a range similar to the acute test results but, higher than in chronic tests. Further tests are needed to decide whether the results gained in this study can be extrapolated to other chemicals. It is proposed to standardize the Enchytraeid Avoidance Test as it is currently done for the Earthworm Avoidance Test by the International Standard Organization (ISO).     

Genuine modern analogues of Precambrian stromatolites from caldera lakes of Niuafoʻou Island, Tonga

Calcareous or dolomitic, often secondarily silicified, laminated microbial structures known as stromatolites are important keys to reconstruct the chemical and biotic evolution of the early ocean. Most authors assume that cyanobacteria-associated microbialitic structures described from Shark Bay, Western Australia, and Exuma Sound, Bahamas, represent modern marine analogues for Precambrian stromatolites. Although they resemble the Precambrian forms macroscopically, their microstructure and mineralogical composition differ from those characterizing their purported ancient counterparts. Most Precambrian stromatolites are composed of presumably in situ precipitated carbonates, while their assumed modern marine analogues are predominantly products of accretion of grains trapped and bound by microbial, predominantly cyanobacterial, benthic mats and biofilms and only occasionally by their physicochemical activity. It has therefore been suggested that the carbonate chemistry of early Precambrian seawater differed significantly from modern seawater, and that some present-day quasi-marine or non-marine environments supporting growth of calcareous microbialites reflect the hydrochemical conditions controlling the calcification potential of Precambrian microbes better than modern seawater. Here we report the discovery of a non-marine environment sustaining growth of calcareous cyanobacterial microbialites showing macroscopic and microscopic features resembling closely those described from many Precambrian stromatolites.     

Copper binding by peat fulvic and humic acids extracted from two horizons of an ombrotrophic peat bog

We studied the binding of Cu(II) to humic acids and fulvic acids extracted from two horizons of an ombrotrophic peat bog by metal titration experiments at pH 4.5, 5.0, 5.5, and 6.0 and 0.1 M KNO3 ionic strength. Free metal ion concentrations in solution were measured using an ion selective electrode. The amounts of base required to maintain constant pH conditions were recorded and used to calculate H+/Cu2+ exchange ratios. The amount of Cu(II) bound to the humic fractions was greater than the amount bound to the fulvic fractions and only at the highest concentrations of metal ion the amount of Cu(II) sorbed by both fractions became equal. The proton to metal ion exchange ratios are similar for all humic substances, with values ranging from 1.0 to 2.0, and decreasing with increased pH. The amount of Cu(II) bound is practically independent of the horizon from which the sample was extracted. The results indicate that the humic substances show similar cation binding behaviour, despite the differences in chemical composition. The copper binding data are quantitatively described with the NICA-Donnan model, which allows to characterize only the carboxylic type binding sites. The values of the binding constants are higher for the humic acids than for the fulvic acids.     

Enantiomeric fractions and congener specific determination of polychlorinated biphenyls in eggs of predatory birds from Doñana National Park (Spain)

The content of 30 polychlorinated biphenyls (PCBs) and the enantiomeric fractions of 10 chiral PCBs were determined in 17 infertile eggs from three different predatory bird species collected in Do?ana National Park (DNP, Spain) in the period 1999-2000. The highest PCB concentration was found in eggs from red kites (0.52-110 microg/g on a fresh weight basis, f.w.) followed by buzzard (0.08-13 microg/g f.w.) and booted eagle (0.10-1.5 microg/g f.w.). Seventy-five percent of the red kite eggs had PCB levels above 4.7 microg/g f.w., which is associated in the literature with reproductive failure. This could be related to the fact that red kite populations have decreased by more than 50% in the last five years in DNP. PCBs # 138, 153, and 180 were the most abundant in all cases. This is the first time that atropisomers of 10 chiral PCBs (PCBs # 45, 84, 91, 95, 132, 135, 136, 149, 174, and 176) in predatory bird eggs have been performed. The enantiomeric fractions (EFs) for most PCBs investigated were non-racemic (EF not = 0.5), ranging from 0.05 to 0.95. The results suggested that predatory birds, mainly red kite species, are highly polluted by PCBs, and PCBs # 95, 132, 135, 136, and 174 strongly deviate from the racemic-mixture values.     

Effects of initial saturation on properties modification and displacement of tetrachloroethene with aqueous isobutanol

Packed column experiments were conducted to study effects of initial saturation of tetrachloroethene (PCE) in the range of 1.0-14% pore volume (PV) on mobilization and downward migration of the non-aqueous phase liquid (NAPL) product upon contact with aqueous isobutanol ( approximately 10 vol.%). This study focused on the consequences of swelling beyond residual saturation. Columns were packed with mixtures of neat PCE, water and glass beads and waterflooded to establish a desired homogeneous residual saturation, and then flooded with aqueous isobutanol under controlled hydraulic conditions. Results showed a critical saturation of approximately 8% PV for these packed column experimental conditions. At low initial PCE saturations (<8% PV), experimental results showed reduced risk of NAPL-product migration upon contact with aqueous isobutanol. At higher initial PCE saturations (>8% PV), results showed NAPL-product mobilization and downward migration which was attributed to interfacial tension (IFT) reduction, swelling of the NAPL-product, and reduced density modification. Packed column results were compared with good agreement to theoretical predictions of NAPL-product mobilization using the total trapping number, N(T). In addition to the packed column study, preliminary batch experiments were conducted to study the effects of PCE volumetric fraction in the range of 0.5-20% on density, viscosity, and IFT modification as a function of time following contact with aqueous isobutanol ( approximately 10 vol.%). Modified NAPL-product fluid properties approached equilibrium within approximately 2 h of contact for density and viscosity. IFT reduction occurred immediately as expected. Measured fluid properties were compared with good agreement to theoretical equilibrium predictions based on UNIQUAC. Overall, this study demonstrates the importance of initial DNAPL saturation, and the associated risk of downward NAPL-product migration, in applying alcohol flooding for remediation of DNAPL contaminated ground water sites.