Optimal Selection of Priority Development Areas Considering Tradeoffs Between Hydrology and Development Configuration

Mixed-integer linear programs are proposed for siting development and conservation areas in watersheds, addressing economic objectives (development perimeter and proximity) and ecological objectives. Links between watershed hydrology and ecology need not be well defined. Parameters for the linear programs are obtained from linearization of the SWAT hydrologic model.     

Calibration and validation of a regionally and seasonally stratified macroinvertebrate index for West Virginia wadeable streams

Multimetric indices (MMIs) are routinely used by federal, state, and tribal entities to assess the quality of aquatic resources. Because of their diversity, abundance, ubiquity, and sensitivity to environmental stress, benthic macroinvertebrates are well suited for MMIs. West Virginia has used a statewide family-level stream condition index (WVSCI) since 2002. We describe the development, validation, and application of a geographically- and seasonally partitioned genus-level index of most probable stream status (GLIMPSS) for West Virginia wadeable streams. Natural classification strata were evaluated with reference site communities using mean similarity analysis and non-metric multidimensional scaling ordination. Forty-one metrics spanning six ecological categories (richness, composition, tolerance, dominance, trophic groups, and habits) were evaluated for sensitivity, responsiveness, redundancy, range and variability across seasonal (spring and summer) and regional (mountains and plateau) strata. Through a step-wise metric selection process, 8–10 metrics were aggregated to comprise four stratum-specific GLIMPSS models (mountain/plateau and spring/summer). A comparison of GLIMPSS with WVSCI exhibited marked improvements where GLIMPSS detecting greater stream impacts. A variation of the GLIMPSS, which differs only in the family-level taxonomic identification of Chironomidae (GLIMPSS (CF)), was comparable to the full GLIMPSS. These MMIs are robust yet practical tools for evaluating impacts to water quality, instream and riparian habitat, and aquatic wildlife in wadeable riffle-run streams based on sensitivity, responsiveness, precision, and independent validation. These models may be used effectively to detect degradation of the naturally occurring benthic community, assess causes of biological degradation, and plan and evaluate remediation of damaged stream ecosystems.     

Monitoring and assessment of surface water acidification following rewetting of oxidised acid sulfate soils

Large-scale exposure of acid sulfate soils during a hydrological drought in the Lower Lakes of South Australia resulted in acidification of surface water in several locations. Our aim was to describe the techniques used to monitor, assess and manage these acidification events using a field and laboratory dataset (n?=?1,208) of acidic to circum-neutral pH water samples. The median pH of the acidified (pH?<?6.5) samples was 3.8. Significant (p?<?0.05) increases in soluble metals (Al, Co, Mn, Ni and Zn above guidelines for ecosystem protection), SO₄ (from pyrite oxidation), Si (from aluminosilicate dissolution) and Ca (from carbonate dissolution and limestone addition), were observed under the acidic conditions. The log of the soluble metal concentrations, acidity and SO₄/Cl ratio increased linearly with pH. The pH, alkalinity and acidity measurements were used to inform aerial limestone dosing events to neutralise acidic water. Field measurements correlated strongly with laboratory measurements for pH, alkalinity and conductivity (r ²?≥?0.97) but only moderately with acidity (r ²?=?0.54), which could be due to difficulties in determining the indicator-based field titration endpoint. Laboratory measured acidity correlated well with calculated acidity (r ²?=?0.87, acidity present as Al^III?>>?H⁺?≈?Mn^II?>?Fe^II/III) but was about 20 % higher on average. Geochemical speciation calculations and XRD measurements indicated that solid phase minerals (schwertmannite and jarosite for Fe and jurbanite for Al) were likely controlling dissolved metal concentrations and influencing measured acidity between pH 2 and 5.     

Experimental Verification of Diffusion Battery Theory

The diffusion battery, an assembly of circular tubes or rectangular channels, is one of the best devices available for measuring the size and size distribution of submicron aerosols in the diameter range 0.002 to 0.2 µ m. The performance of these batteries is known from molecular diffusion theory, but until now has not been checked experimentally in this size range because of the lack of the necessary monodisperse aerosols. Experimental measurements on singly charged monodisperse aerosols from 0.01 µm to 0.1 µ m are described using a General Electric and a Pollak condensation nucleus counter to measure the aerosol penetration through the stages of a set of portable diffusion batteries in series. Particle sizes in the range tested could be selected at will by adjusting the voltage of an electric mobility classifier. The fraction of aerosol of a given size passing through each battery stage was found to agree closely with the penetration calculated from molecular diffusion theory for that size. This shows that the theory is correct and confirms that the aerosol produced by the electric mobility classifier was monodisperse. In addition, it was found that the difference in penetration between a charged versus a neutralized aerosol was insignificant except for the smallest aerosols used.     

dry coke quenching,air pollution and energy: a status report

Dry quenching of incandescent coke after it has been pushed from the coking ovens is a proved, reliable process that is presently being used in several industrialized countries. Foremost among dry quenching’s advantages are: (1) virtual elimination of air pollutants emitted during quenching; (2) elimination of potential water pollution associated with wet quenching; (3) improvements in the working environment; (4) saving substantial amounts of energy in usable forms; (5) producing more usable coke that is superior to wet-quenched coke. By continuously circulating inert gases through a cooling chamber that contains hot coke, dry quenching recovers waste-heat energy that can be used to produce steam, to produce electricity, to preheat combustion air, to preheat coal, to dry coal, and to preheat feed water supplied to fuel-fired boilers. The pay-out period on the capital investment (approximately $7,100,000) for an installation capable of processing 5500 tons of coke/day is less than four years.     

MITIGATING IMPACTS OF A SEVERE SUSTAINED DROUGHT ON COLORADO RWER WATER RESOURCES1

ABSTRACT: We evaluated the effects of institutional responses developed for coping with a severe sustained drought (SSD) in the Colorado River Basin on selected system variables using a SSD inflow hydrology derived from the drought which occurred in the Colorado River basin from 1579–1616. Institutional responses considered are reverse equalization, salinity reduction, minimum flow requirements, and temporary suspension of the delivery obligation of the Colorado River Compact. Selected system variables (reservoir contents, streamflows, consumptive uses, salinity, and power generation) from scenarios incorporating the drought-coping responses were compared to those from Baseline conditions using the current operating criteria. The coping responses successfully mitigated some impacts of the SSD on consumptive uses in the Upper Basin with only slight impacts on consumptive uses in the Lower Basin, and successfully maintained specified minimum streamflows throughout the drought with no apparent effect on consumptive uses. The impacts of the coping responses on other system variables were not as clear cut. We also assessed the effects of the drought-coping responses to normal and wet hydrologic conditions to determine if they were overly conservative. The results show that the rules would have inconsequential effects on the system during normal and wet years.     

Using Decision Analysis to Choose Phosphorus Targets for Lake Erie

Lake Erie water quality has improved dramatically since the degraded conditions of the 1960s. Additional gains could be made, but at the expense of further investment and reductions in fishery productivity. In facing such cross-jurisdictional issues, natural resource managers in Canada and the United States must grapple with conflicting objectives and important uncertainties, while considering the priorities of the public that live in the basin. The techniques and tools of decision analysis have been used successfully to deal with such decision problems in a range of environmental settings, but infrequently in the Great Lakes. The objective of this paper is to illustrate how such techniques might be brought to bear on an important, real decision currently facing Lake Erie resource managers and stakeholders: the choice of new phosphorus loading targets for the lake. The heart of our approach is a systematic elicitation of stakeholder preferences and an investigation of the degree to which different phosphorus-loading policies might satisfy ecosystem objectives. Results show that there are potential benefits to changing the historical policy of reducing phosphorus loads in Lake Erie.     

MICRO-RELIEF SURFACE DEPRESSION STORAGE: ANALYSIS OF MODELS TO DESCRIBE THE DEPTH-STORAGE FUNCTION1

ABSTRACT: Micro-relief surface depression storage is one of the components of the rainfall-runoff process. The quantification of surface depression storage values and a depth-storage model to describe the storage was the subject of this study. Point measurement data were collected on 258 surfaces of 5 soils and three artificial surfaces. Five methods of computing storage, 15 depth-storage models, two depth increments, and six grid spacings were investigated. The 1-inch grid computational method, 0.1-inch depth increment, and 1-inch grid spacings were recommended. The surface depression storage function is best described by the model S = aD^b, which relates surface depression storage as a function of depth with two equation parameters. Equations for describing the surface depression storage model parameters have been developed.