Empirical Estimation of Stream Discharge Using Channel Geometry in Low‐Gradient,Sand‐Bed Streams of the Southeastern Plains

Manning's equation is used widely to predict stream discharge (Q) from hydraulic variables when logistics constrain empirical measurements of in‐bank flow events. Uncertainty in Manning's roughness (n_M) is the major source of error in natural channels, and sand‐bed streams pose difficulties because flow resistance is affected by flow‐dependent bed configuration. Our study was designed to develop and validate models for estimating Q from channel geometry easily derived from cross‐sectional surveys and available GIS data. A database was compiled consisting of 484 Q measurements from 75 sand‐bed streams in Alabama, Georgia, South Carolina, North Carolina (Southeastern Plains), and Florida (Southern Coastal Plain), with six New Zealand streams included to develop statistical models to predict Q from hydraulic variables. Model error characteristics were estimated with leave‐one‐site‐out jackknifing. Independent data of 317 Q measurements from 55 Southeastern Plains streams indicated the model (Q = A_cR_H^0.6906S^0.1216; where A_c is the channel area, R_H is the hydraulic radius, and S is the bed slope) best predicted Q, based on Akaike's information criterion and root mean square error. Models also were developed from smaller Q range subsets to explore if subsets increased predictive ability, but error fit statistics suggested that these were not reasonable alternatives to the above equation. Thus, we recommend the above equation for predicting in‐bank Q of unbraided, sandy streams of the Southeastern Plains.     

Driving, navigation, and vehicular technology: experiences of older drivers and their co-pilots

OBJECTIVE: The objective of this article is to explore relationship between older drivers and their passengers (co-pilots) and potential implications of in-vehicle navigation technology on their driving safety. METHODS: Semi-structured interviews were conducted with 44 healthy, community-dwelling older adults (aged 60-83) or 22 married couples. Males identified themselves as drivers and females identified themselves as passengers (i.e., co-pilot). RESULTS: Findings indicate that operating a motor vehicle in older adulthood is a shared activity between drivers and passengers. Older drivers and co-pilots reported their level of interaction depended on their familiarity with their route. Navigating unfamiliar areas, particularly large urban centers, was identified as the most challenging driving situation. Participants identified their level of collaboration would increase with the advent of in-vehicle navigation technology. Safety concerns related to the use of this technology, included distraction of both drivers and passengers. Differences amongst couples in their perceptions of using this technology were linked to their level of experience with using other forms of technology. CONCLUSIONS: Older drivers and passengers identified working closely together when operating a motor vehicle. Further investigation into the effects of in-vehicle navigation technology on the driving safety of older drivers and their co-pilots is warranted.     

Comparison of remotely-sensed surveys vs. in situ plot-based assessments of sea grass condition in Barnegat Bay-Little Egg Harbor,New Jersey USA

With the increasing appreciation that sea grass habitats are in global decline, there is a great need to be able to efficiently and effectively assess and characterize the status and trends of sea grass in our coastal ecosystems. This paper examines the utility of remotely sensed vs. in situ plot-based monitoring using the Barnegat Bay-Little Egg Harbor (BB-LEH), New Jersey, USA estuarine system as a case study. Eelgrass (Zostera marina) is the dominant species, while widgeon grass (Ruppia maritima) is also common in lower salinity regions of the BB-LEH. Aerial imagery collected during the months of July and August 2009 was interpreted and mapped using object based image analysis techniques, similar to techniques used in the 2003 mapping survey of this system. Boat-based in situ monitoring data were collected concurrently with the aerial photography to assist the image interpretation and for an independent accuracy assessment. We compared the remotely-sensed mapping of sea grass cover change (in 2003 vs. 2009) vs. in situ plot-based monitoring conducted from 2004 through 2009. Comparison of the remotely-sensed vs. the in situ plot-change analysis suggests that the two methodologies had broadly similarly results, with the percent area showing declines in sea grass cover greater than those that exhibited increases. In conclusion, the two studies provide corroborating evidence that sea grass has declined in percent cover in the BB-LEH system during the decade of the 2000’s. While remotely-sensed surveys provide synoptic information for a “big picture” view on sea grass distribution, site specific in situ sampling is required to determine other aspects of sea grass status, e.g. above vs. below-ground biomass, blade length, shoot density, epiphytic loading, etc. Either method alone gives an incomplete picture. As demonstrated in this study, to fully characterize the spatial extent, health, and density of sea grass meadows across the entire estuary, combining remote sensing surveys concomitantly with comprehensive in situ assessment provides the most robust approach.     

Effects of Ceiling-Mounted HEPA-UV Air Filters on Airborne Bacteria Concentrations in an Indoor Therapy Pool Building

Abstract

The purpose of this study was to assess the effectiveness of a new generation of high-volume, ceiling-mounted high-efficiency particulate air (HEPA)-ultraviolet (UV) air filters (HUVAFs) for their ability to remove or inactivate bacterial aerosol. In an environmentally controlled full-scale laboratory chamber (87 m³), and an indoor therapy pool building, the mitigation ability of air filters was assessed by comparing concentrations of total bacteria, culturable bacteria, and airborne endotoxin with and without the air filters operating under otherwise similar conditions. Controlled chamber tests with pure cultures of aerosolized Mycobacterium parafortuitum cells showed that the HUVAF unit tested provided an equivalent air-exchange rate of 11 hr^?1. Using this equivalent air-exchange rate as a design basis, three HUVAFs were installed in an indoor therapy pool building for bioaerosol mitigation, and their effectiveness was studied over a 2-year period. The HUVAFs reduced concentrations of culturable bacteria by 69 and 80% during monitoring periods executed in respective years. The HUVAFs reduced concentrations of total bacteria by 12 and 76% during the same monitoring period, respectively. Airborne endotoxin concentrations were not affected by the HUVAF operation.     

Metabolism of n-C10:0 and n-C11:0 fatty acids by Trichoderma koningii,Penicillium janthinellum and their mixed culture: I. Biomass and CO2 production,and allocation of intracellular lipids

The capacity of two soil fungi, Trichoderma koningii and Penicillium janthinellum, to oxidize n-C_10:0 and n-C_11:0 fatty acids to CO₂ and store intracellular lipids during growth is unknown. This article reports for the first time the metabolism of decanoic acid (DA, C_10:0), undecanoic acid (UDA, n-C_11:0), a mixture of the acids (UDA+DA) and a mixture of UDA+ potato dextrose broth (PDB) by T. koningii and P. janthinellum and their mixed culture. A control PDB complex substrate was used as a substrate control treatment. The fungal cultures were assayed for their capacity to: (1) oxidize n-C_10:0 and n-C_11:0 fatty acids to CO₂ and (2) store lipids intracellularly during growth. On all four fatty acid substrates, the mixed T. koningii and P. janthinellum culture produced more biomass and CO₂ than the individual fungal cultures. Per 150 mL culture, the mixed species culture grown on UDA+PDB and on PDB alone produced the most biomass (7,567 mg and 11,425 mg, respectively). When grown in DA, the mixed species culture produced the least amount of biomass (6,400 mg), a quantity that was lower than those obtained in UDA (7,550 mg) or UDA+DA (7,270 mg). Amounts of CO₂ produced ranged from 210 mg under DA to 618 mg under PDB, and these amounts were highly correlated with biomass (r² = 0.99). Fluorescence microscopy of stained lipids in the mixed fungal cell cultures growing during the exponential phase demonstrated larger fungal cells and higher accumulation of lipids in membranes and storage bodies than those observed during the lag and stationary phases. T. koningii and P. janthinellum grown on n-C_10:0 and n-C_11:0 fatty acids produced lower amounts of biomass and CO₂, but stored higher amounts of intracellular lipids, than when grown on PDB alone.     

Nest site selection in the open-nesting honeybee Apis florea

We studied nest site selection by swarms of the red dwarf honeybee, Apis florea. By video recording and decoding all dances of four swarms, we were able to determine the direction and distances indicated by 1,239 dances performed by the bees. The bees also performed a total of 715 nondirectional dances; dances that were so brief that no directional information could be extracted. Even though dances converged over time to a smaller number of areas, in none of the swarms did dances converge to one site. As a result, even prior to lift off, bees performed dances indicating nest sites in several different directions. Two of four swarms traveled directly in what seemed to be the general direction indicated by the majority of dances in the half hour prior to swarm lift off. The other two traveled along circuitous routes in the general direction indicated by the dances. We suggest that nest site selection in A. florea has similar elements to nest site selection in the better-studied Apis mellifera. However, the observation that many more locations are indicated by dances prior to lift off also shows that there are fundamental differences between the two species.     

The influence of dynamic chamber design and operating parameters on calculated surface-to-air mercury fluxes

Dynamic Flux Chambers (DFCs) are commonly applied for the measurement of non-point source mercury (Hg) emissions from a wide range of surfaces. A standard operating protocol and design for DFCs does not exist, and as a result there is a large diversity in methods described in the literature. Because natural and anthropogenic non-point sources are thought to contribute significantly to the atmosphere Hg pool, development of accurate fluxes during field campaigns is essential. The objective of this research was to determine how differences in chamber material, sample port placement, vertical cross sectional area/volume, and flushing flow rate influence the Hg flux from geologic materials. Hg fluxes measured with a Teflon chamber were higher than those obtained using a polycarbonate chamber, with differences related to light transmission and substrate type. Differences in sample port placement (side versus top) did not have an influence on Hg fluxes. When the same flushing flow rate was applied to two chambers of different volumes, higher fluxes were calculated for the chamber with the smaller volume. Conversely, when two chambers with different volumes were maintained at similar turnover times, the larger volume chamber yielded higher Hg fluxes. Overall, the flushing flow rate and associated chamber turnover time had the largest influence on Hg flux relative to the other parameters tested. Results from computational fluid dynamic (CFD) modeling inside a DFC confirm that the smaller diffusion resistance at higher flushing flows contributes to the higher measured flux. These results clearly illustrate that differences in chamber design and operation can significantly influence the resulting calculated Hg flux, and thus impact the comparability of results obtained using DFC designs and/or operating parameters. A protocol for determining a flushing flow rate that results in fluxes less affected by chamber operating conditions and design is proposed. Application of this protocol would provide a framework for comparison of data from different studies.     

Accumulation of potentially toxic elements in plants and their transfer to human food chain

Abstract

Contaminated soils can be a source for crop plants of such elements like As, Cd, Cr, Cu, Ni, Pb, and Zn. The excessive transfer of As, Cu, Ni, and Zn to the food chain is controlled by a “soil‐plant barrier”; however, for some elements, including Cd, the soil‐plant barrier fails. The level of Cd ingested by average person in USA is about 12 μg/day, which is relatively low comparing to Risk Reference Dose (70 μg Cd/day) established by USEPA. Food of plant origin is a main source of Cd intake by modern society. Fish and shellfish may be a dominant dietary sources of Hg for some human populations. About half of human Pb intake is through food, of which more than half originates from plants. Dietary intake of Cd and Pb may be increased by application of sludges on cropland with already high levels of these metals. Soils amended with sludges in the USA will be permitted (by USEPA‐503 regulations) to accumulate Cr, Cd, Cu, Pb, Hg, Ni, and Se, and Zn to levels from 10 to 100 times the present baseline concentrations. These levels are very permissive by international standards. Because of the limited supply of toxicity data obtained from metals applied in sewage sludge, predictions as to the new regulations will protect crop plants from metal toxicities, and food chain from contamination, are difficult to make.