Potassium, phosphorus, or nitrogen limit root allocation, tree growth, or litter production in a lowland tropical forest

We maintained a factorial nitrogen (N), phosphorus (P), and potassium (K) addition experiment for 11 years in a humid lowland forest growing on a relatively fertile soil in Panama to evaluate potential nutrient limitation of tree growth rates, fine-litter production, and fine-root biomass. We replicated the eight factorial treatments four times using 32 plots of 40 x 40 m each. The addition of K was associated with significant decreases in stand-level fine-root biomass and, in a companion study of seedlings, decreases in allocation to roots and increases in height growth rates. The addition of K and N together was associated with significant increases in growth rates of saplings and poles (1-10 cm in diameter at breast height) and a further marginally significant decrease in stand-level fine-root biomass. The addition of P was associated with a marginally significant (P = 0.058) increase in fine-litter production that was consistent across all litter fractions. Our experiment provides evidence that N, P, and K all limit forest plants growing on a relatively fertile soil in the lowland tropics, with the strongest evidence for limitation by K among seedlings, saplings, and poles.     

The ecological impact of invasive cane toads on tropical snakes: field data do not support laboratory-based predictions

Predicting which species will be affected by an invasive taxon is critical to developing conservation priorities, but this is a difficult task. A previous study on the impact of invasive cane toads (Bufo marinus) on Australian snakes attempted to predict vulnerability a priori based on the assumptions that any snake species that eats frogs, and is vulnerable to toad toxins, may be at risk from the toad invasion. We used time-series analyses to evaluate the accuracy of that prediction, based on >3600 standardized nocturnal surveys over a 138-month period on 12 species of snakes and lizards on a floodplain in the Australian wet-dry tropics, bracketing the arrival of cane toads at this site. Contrary to prediction, encounter rates with most species were unaffected by toad arrival, and some taxa predicted to be vulnerable to toads increased rather than declined (e.g., death adder Acanthophis praelongus; Children's python Antaresia childreni). Indirect positive effects of toad invasion (perhaps mediated by toad-induced mortality of predatory varanid lizards) and stochastic weather events outweighed effects of toad invasion for most snake species. Our study casts doubt on the ability of a priori desktop studies, or short-term field surveys, to predict or document the ecological impact of invasive species.     

Ontogenetic habitat shift,population growth,and burrowing behavior of the Indo-Pacific beach star, <Emphasis Type="Italic">Archaster typicus</Emphasis> (Echinodermata; Asteroidea)

Archaster typicus, a common sea star in Indo-Pacific regions, has been a target for the ornamental trade, even though little is known about its population biology. Spatial and temporal patterns of abundance and size structure of A. typicus were studied in the Davao Gulf, the Philippines (125°42.7′E, 7°0.6′N), from February 2008 to December 2009. Specimens of A. typicus were associated with intertidal mangrove prop roots, seagrass meadows, sandy beaches, and shoals. Among prop roots, specimens were significantly smaller and had highest densities (131 ind. m⁻²) between November and March. High organic matter in sediment and a relatively low predation rate seemed to support juvenile life among mangroves. Size and density analyses provided evidence that individuals gradually move to seagrass, sandy habitats, and shoals as they age. Specimens were significantly larger at a shoal (maximum radius R = 81 mm). New recruits were found between August and November in both 2008 and 2009. Timing of recruitment and population size frequencies confirmed a seasonal reproductive cycle. Juveniles had relatively high growth rates (2–7 mm month⁻¹) and may reach an R of 20–25 mm after 1 year. Growth rates of larger specimens (R > 30 mm) were generally <2 mm month⁻¹. The activity pattern of A. typicus was related to the tidal phase and not to time of day: Specimens moved over the sediment surface during low tides and were burrowed during high tides possibly avoiding predation. This is one of the first studies to document an ontogenetic habitat shift for sea stars and provides new biological information as a basis for management of harvested A. typicus populations.     

Probability sampling of stony coral populations in the Florida Keys

Principles of probability survey design were applied to guide large-scale sampling of populations of stony corals and associated benthic taxa in the Florida Keys coral reef ecosystem. The survey employed a two-stage stratified random sampling design that partitioned the 251-km(2) domain by reef habitat types, geographic regions, and management zones. Estimates of the coefficient of variation (ratio of standard error to the mean) for stony coral population density and abundance ranged from 7% to 12% for four of six principal species. These levels of survey precision are among the highest reported for comparable surveys of marine species. Relatively precise estimates were also obtained for octocoral density, sponge frequency of occurrence, and benthic cover of algae and invertebrates. Probabilistic survey design techniques provided a robust framework for estimating population-level metrics and optimizing sampling efficiency.     

Polycyclic aromatic hydrocarbons and trace metal contamination of coastal sediment and biota from Togo

The state of contamination of tropical environments, particularly in Africa, remains a relatively under explored subject. Here, we determined polycyclic aromatic hydrocarbon (PAH) and trace metal concentrations in coastal sediment and biota samples (fish and mussels) from Togo (West Africa). In the sediments, the ∑21 PAH concentrations ranged from <4 ng g(-1) to 257 ng g(-1), averaging 92 ng g(-1). Concentration ratios of low molecular weight PAHs (2-3 rings) versus high molecular weight PAHs (≥4 rings) were always lower than 1 (ranging from 0.08 to 0.46) indicating that high molecular weight PAHs were dominant in all sediment samples, and that PAHs originated mainly from anthropogenic combustion activities. The sediments were also analyzed for major elements and a total of 15 trace metals, which were found in elevated concentrations. The calculated enrichment factor (EF) values relative to the Earth's crust show that the contamination is extremely severe for Cd (EF = 191), severe for Cr (EF = 18) and U (EF = 17.8), moderately severe for Zr (EF = 8.8), for Ni (EF = 6.8), Sr (EF = 5.9) and Ba (EF = 5.4), and moderate for V (EF = 3.6) and Zn (EF = 3.4). Sediments sampled in areas affected by the dumping of phosphorite mine tailings showed particularly high concentrations of trace metals. Overall, concentrations of both PAHs and trace metals in sediment tend to increase from the coastline to the open sea (2 km offshore). This is attributable to the increasingly finer texture of coastal sediment found offshore, which has a terrigenous origin and appears loaded with various contaminants through adsorption processes. Such high loads of trace metals were also found in the biota (fish and mussels). The ratio of measured trace metal concentrations in biota to threshold limits set by the World Health Organization herein defined as relative health factor (RHF) was high. Average RHF values in fish were highest for Se (470), As (250), Ag (97), Ni (78), Mn (63), Fe (53), Pb (36), Cd (10), and Cr (7) while lowest for Cu (0.08) and Zn (0.03). Cd and Al did not bioaccumulate in the analyzed fish species. In mussels, the RHF values were highest for Fe (9,108), As (295), Pb (276), Se (273), Mn (186), Ni (71), Ag (70), Cd (14), and Cu (4).     

Modelling of occupational respirable crystalline silica exposure for quantitative exposure assessment in community-based case-control studies

We describe an empirical model for exposure to respirable crystalline silica (RCS) to create a quantitative job-exposure matrix (JEM) for community-based studies. Personal measurements of exposure to RCS from Europe and Canada were obtained for exposure modelling. A mixed-effects model was elaborated, with region/country and job titles as random effect terms. The fixed effect terms included year of measurement, measurement strategy (representative or worst-case), sampling duration (minutes) and a priori exposure intensity rating for each job from an independently developed JEM (none, low, high). 23,640 personal RCS exposure measurements, covering a time period from 1976 to 2009, were available for modelling. The model indicated an overall downward time trend in RCS exposure levels of -6% per year. Exposure levels were higher in the UK and Canada, and lower in Northern Europe and Germany. Worst-case sampling was associated with higher reported exposure levels and an increase in sampling duration was associated with lower reported exposure levels. Highest predicted RCS exposure levels in the reference year (1998) were for chimney bricklayers (geometric mean 0.11 mg m(-3)), monument carvers and other stone cutters and carvers (0.10 mg m(-3)). The resulting model enables us to predict time-, job-, and region/country-specific exposure levels of RCS. These predictions will be used in the SYNERGY study, an ongoing pooled multinational community-based case-control study on lung cancer.     

Lumbar Bone Mineral Density Phantomless Computed Tomography Measurements and Correlation with Age and Fracture Incidence

Objective: Low bone quality is a contributing factor to motor vehicle crash (MVC) injury. Quantification of occupant bone mineral density (BMD) is important from an injury causation standpoint. The first aim of this study was to validate a technique for measuring lumbar volumetric BMD (vBMD) from phantomless computed tomography (CT) scans. The second aim was to apply the validated phantomless technique to quantify lumbar vBMD in Crash Injury Research and Engineering Network (CIREN) occupants for correlation with age, fracture incidence, and osteopenia/osteoporosis diagnoses.

Methods: Quantitative CT (qCT) and dual-energy X-ray absorptiometry (DXA) were collected prospectively for 50 subjects and used to validate a technique to measure vBMD from 281 phantomless CT scans of CIREN occupants. Hounsfield unit (HU) measurements were collected from the L1–L5 vertebrae, right psoas major muscle, and anterior subcutaneous fat for all subjects and from 3 phantom ports with known mg/cc calcium hydroxyapatite values for the validation group. qCT calibration was accomplished using regressions between the phantom HU and mg/cc values to convert L1–L5 HU values to mg/cc. A phantomless calibration technique was developed where the fat and muscle HU values were linearly regressed against fat (?69 mg/cc) and muscle (77 mg/cc) to establish a conversion for L1–L5 HU measurements to mg/cc. vBMD calculated from qCT versus the phantomless method was compared for the 50 subjects to assess agreement and a mg/cc osteopenia threshold was established using DXA T-scores. CIREN HU measurements were converted to mg/cc using the phantomless technique and the mg/cc osteopenia threshold was used to compare vBMD to age, fracture incidence, and osteopenia comorbidity classifications in CIREN.

Results: Linear regression of lumbar vBMD derived from the qCT versus phantomless calibrations showed excellent agreement (R² = 0.87, P <.0001). A 145 mg/cc threshold for osteopenia was established (sensitivity = 1, specificity = 0.57) and 44 CIREN occupants had vBMD below this threshold. Of these 44 occupants, 64% were not classified as osteopenic in CIREN, but vBMD suggested undiagnosed osteopenia. Age was negatively correlated with vBMD in both sexes (P <.0001) and CIREN occupants with less than 145 mg/cc vBMD sustained an average 1.7 additional rib/sternum fractures (P =.036).

Conclusions: Because lumbar vBMD was estimated from phantomless CT scans with accuracy similar to qCT, the phantomless technique can be broadly applied to both prospectively and retrospectively assess patient bone quality for research and clinical studies related to MVCs, falls, and aging.     

250-year records of mercury and trace element deposition in two lakes from Cajas National Park,SW Ecuadorian Andes

Environmental Science and Pollution Research - Historical records of trace elements in lake sediments provide source-to-sink information about potentially toxic pollutants across space and time. We...     

Experimental analysis of friction stir forming for dissimilar material joining application

Mass reduction of automotive body structures is a critical part of achieving reduced CO₂ emissions in the automotive industry. There has been significant work on the application of ultra high strength steels and aluminum alloys. However, the next paradigm is the integrated use of both materials, which poses a challenge of how to join the dissimilar materials. Friction stir forming is a new manufacturing process for joining dissimilar materials. The concept of this process is stir heating one material and forming it into a mechanical interlocking joint with the second material. In this research the process was experimentally analyzed in a position controlled robotic friction stir welding machine between aluminum and steel workpieces. New tool geometries were evaluated toward the goal of optimizing joint strength. The significant process parameters were identified and their optimized settings for the current experimental conditions defined using a design of experiments methodology. A scanning electron microscope was used to characterize the bonding and joint structure for single and multi-pin configurations. Two failure modes, aluminum sheet peeling and bonding delamination, i.e. braze fracture, were identified. It was found that the presence of zinc coating on the steel and overall joint geometry greatly affected the joint strength. The aluminum–zinc braze joint appears to be the largest contributor to joint strength for the single-pin joint configuration. The multi-pin geometry enabled a distribution of load to the four pins following fracture of the braze for increased joint toughness and ductility. Thus, the FSF method has been shown to exhibit potential for joining of aluminum to steel.