Variation of the Relative Humidity of Air Released from Canisters after Ambient Sampling

ABSTRACT

Dalton's law of partial pressures and the hypothesis that water vapor equilibrium in a canister is identical to that established above liquid water are used to predict the variation of the percent relative humidity (%RH) of air released from canisters used in ambient air sampling, typically 6-L canisters pressurized with 18 L of air. When (and if) the water vapor partial pressure in a canister exceeds its saturation vapor pressure, water vapor condensation begins and the condensation rate equals the sampling rate of water vapor into the canister. Under constant temperature conditions, the air subsequently released from the canister is less humid than the original sample, following the relationship %RH = 100% (6 L/V_s) for V_s> V_r, where V_s is the residual air volume (referenced to atmospheric pressure), and V_r is shown to depend on the %RH of the ambient air sample. V_r is the residual air volume at which water is completely removed (except for adsorbed water vapor) from the canister wall. For V_s < V_r, the predicted %RH is constant and equal to its value at V_r. Experimental values agree reasonably well with predictions at both high (90%) and low (34%) RH. However, experimental values are often slightly displaced (usually towards lower values of %RH) for mid-range %RH (61%) and variations in %RH near V_r change from canister to canister.     

Concentrations of polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans in soil in the vicinity of a landfill

Estonia still has no waste incineration facilities, which would act as substantial sources of dibenzo-p-dioxins (PCDDs) and dibenzofurans (PCDFs) pollution. As landfill fires may serve as sources of dioxins, we focused on the concentrations of PCDD and PCDF in soil samples taken in the vicinity of the landfill located at south-east Estonia in the course of our inventory. Concentrations of polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were studied in five soil samples taken in the vicinity of the Laguja landfill in south-east Estonia. The four soil samples were taken in southern, eastern, western and northern parts not further than 300 m from the landfill, and one sample was taken at the distance of 3 km from the landfill. The PCDD/F concentrations in all soil samples were at background level (0.64-2.33 pg I-TEQ WHO/g dry weight). To maintain this situation, the administrator of the landfill must avoid landfill fires, which are one of the reasons for the generation of dioxins and furans.     

Enhancing phytoextraction: the effect of chemical soil manipulation on mobility, plant accumulation, and leaching of heavy metals

For heavy metal-contaminated agricultural land, low-cost, plant-based phytoextraction measures can be a key element for a new land management strategy. When agents are applied into the soil, the solubility of heavy metals and their subsequent accumulation by plants can be increased, and, therefore, phytoextraction enhanced. An overview is given of the state of the art of enhancing heavy metal solubility in soils, increasing the heavy metal accumulation of several high-biomass-yielding and metal-tolerant plants, and the effect of these measures on the risk of heavy metal leaching. Several organic as well as inorganic agents can effectively and specifically increase solubility and, therefore, accumulation of heavy metals by several plant species. Crops like willow (Salix viminalis L.), Indian mustard [Brassica juncea (L.) Czern.], corn (Zea mays L.), and sunflower (Helianthus annuus L.) show high tolerance to heavy metals and are, therefore, to a certain extent able to use the surpluses that originate from soil manipulation. More than 100-fold increases of lead concentrations in the biomass of crops were reported, when ethylenediaminetetraacetic acid (EDTA) was applied to contaminated soils. Uranium concentrations could be strongly increased when citric acid was applied. Cadmium and zinc concentrations could be enhanced by inorganic agents like elemental sulfur or ammonium sulfate. However, leaching of heavy metals due to increased mobility in soils cannot be excluded. Thus, implementation on the field scale must consider measures to minimize leaching. So, the application of more than 1 g EDTA kg(-1) becomes inefficient as lead concentration in crops is not enhanced and leaching rate increases. Moreover, for large-scale applications, agricultural measures as placement of agents, dosage splitting, the kind and amount of agents applied, and the soil properties are important factors governing plant growth, heavy metal concentrations, and leaching rates. Effective prevention of leaching, breeding of new plant material, and use of the contaminated biomass (e.g., as biofuels) will be crucial for the acceptance and the economic breakthrough of enhanced phytoextraction.     

Metabolic fate of the 14C-labeled herbicide clodinafop-propargyl in soil

The metabolic fate of ¹⁴C-phenyl-labeled herbicide clodinafop-propargyl (CfP) was studied for 28 days in lab assays using a soil from Germany (A_p horizon, silt loam, and cambisol). Mineralization amounted to 12.40% of applied ¹⁴C after 28 days showing a distinct lag phase until day 7 of incubation. Portions of radioactivity extractable by means of 0.01 M CaCl₂ solution (bioavailable fraction) decreased rapidly and were 4.41% after 28 days. Even immediately after application, only 57.31% were extracted with the aqueous solvent. Subsequent extraction using accelerated solvent extraction (ASE; acetonitrile/water 4:1, v/v) released 39.91% of applied ¹⁴C with day 0 and 26.16% with day 28 of incubation from the samples. Non-extractable portions of radioactivity thus, increased with time amounting to 11.99% (day 0) and 65.00% (day 28). A remarkable increase was observed between 14 and 28 days correlating with the distinct increase of mineralization. No correlation was found throughout incubation with general microbial activity as determined by DMSO reduction. Analysis of the CaCl₂ and ASE extracts by radio-TLC, radio-HPLC and GC/MS revealed that CfP was rapidly cleaved to free acid clodinafop (Cf), which was further (bio-) transformed; DT₅₀ values (based on radio-TLC detection of the parent compound) were far below 1 day (CfP) and about 7 days (Cf). TLC analysis pointed to 2-(4-hydroxyphenoxy)-propionic acid as further metabolite. Due to fractionation of non-extractable residues, most of the ¹⁴C was associated with fulvic and humic acids, portions in humin fractions and non-humics were moderate and low, respectively. Using a special strategy, which included pre-incubation of the soil with CfP and then mineralization of ¹⁴C-CfP as criterion, a microorganism was isolated from the soil examined. The microorganism grew using CfP as sole carbon source with concomitant evolution of ¹⁴CO₂. The bacterium was characterized by growth on commonly used carbon sources and by 16S rDNA sequence analysis. The sequence exhibited high similarity with that of Rhodococcus wratislaviensis (99.56%; DSM 44107, NCIMB 13082).     

Monitoring of Bt-Maize pollen exposure in the vicinity of the nature reserve Ruhlsdorfer Bruch in northeast Germany 2007 to 2008

Background, aim, and scope Basically, technological innovations are associated with benefits and risks. This is also true for the introduction of genetically modified organisms (GMO) into agriculture. In Germany, precautionary regulations currently demand isolation distances (i.?e. buffer zones) for the cultivation of genetically modified maize (Bt-maize) in the vicinity of conventional (150?m) and organic maize fields (300?m). The Bt-toxin may harm non-target organisms (NTO) such as Lepidoptera. Despite this, corresponding regulations for the protection of nature reserves are lacking to date. Conventional and Bt-maize have been grown in the vicinity of the Flora-Fauna-Habitat (FFH) Ruhlsdorfer Bruch in Brandenburg, Germany. The aim of this study was to investigate whether exposure of maize pollen from surrounding Bt-maize fields to NTOs in the nature protection area could be excluded or not. Two types of exposure were investigated: Firstly, whether maize pollen was dispersed by wind into the nature reserve area exposing resident NTOs. Secondly, foraging NTOs from the nature reserve are exposed by roaming the surrounding fields and collecting maize pollen. In order to fulfil the precautionary principle defined by law, the study should help to determine appropriate isolation distances for the cultivation of Bt-maize with regard to sustainable protection of NTOs in the FFH Ruhlsdorfer Bruch. In 2007, the local authorities issued an isolation distance between Bt-maize fields and nature reserves of 100?m and in 2008, this became 250?m in the northern and 500?m in the westerly direction, respectively. Materials and methods Standardised methods for biological and technical pollen sampling issued by the Association of German Engineers (VDI 4330 Part 3, 2007 and VDI 4330 Part 4, 2006) were applied providing a quality controlled and methodologically harmonised database which does not only serve the needs to be fulfilled by the present case-specific monitoring study but can also be used as a reference database for further investigations. Maize pollen exposure was measured within the FFH Ruhlsdorfer Bruch and its immediate vicinity in July and August 2007 and 2008. In 2007, the sampling was performed at three sites using 12 technical samplers (Sigma-2/PMF) placed at five measuring points at distances from 5?m to 120?m from the maize field edges. Additionally, for biological pollen sampling six bee colonies were situated at these three sites (two colonies at each site). The technical sampler Sigma-2/PMF enables point sampling which is primarily influenced by wind and topography providing information on effective maize pollen input (flow and deposition) at the measuring sites. Honey-bees roaming in the surrounding area with typical foraging distances of several kilometres may act as planar collectors. They may serve as indicators for the exposure to pollen-collecting NTOs. Furthermore, biological sampling is more selective due to the organism’s preferences, whereas the technical sampling is neutral. Hence, both the technical and the biological sampling complement each other in their scope of application. The pollen samples of both matrices were analysed microscopically and the maize pollen loads were quantified. Pollen-DNA was analysed by means of the quantitative PCR-method (qPCR) identifying conventional and Bt-maize pollen by two independent laboratories. In 2008, the monitoring was repeated with additional sites. Eighteen technical samplers were exposed at five sites with eight measuring points at distances from 5?m to 250?m from the maize field edges. Two honey-bee colonies for biological sampling were placed at one site for control purposes. PCR-analyses were performed to measure the amounts of Bt-maize pollen in the samples. Results The results of pollen monitoring at the Ruhlsdorfer Bruch revealed maize pollen exposure for all monitoring sites in both surveys. In 2007, up to 1.75 million maize pollen/m² were deposited at sites closest to the maize field. At 120?m from field edge in the middle of the FFH-reserve, 99,000 maize pollen/m² were detected. In 2008, similar results were found, at distances up to 250?m from the field edges deposition of 164,000 maize pollen/m² was detected. Data on maize pollen deposition show a clear distance relationship and are in accordance with results of further comprehensive surveys based on the same methodology (Hofmann 2007). The results of the microscopic analysis of the pollen pellets demonstrated that bees collected maize pollen at all sites, in 2007 and 2008. Although maize pollen is not the main food source (2007:0.1–0.3?%; 2008:2–3?%) the collection efficiency of the bee colonies resulted in high amounts of sampled maize pollen with 4 to 11 million per site in 2007 and up to 467 million in 2008. Molecular-biological analysis of maize pollen DNA by qPCR demonstrated that transgenic Bt-MON810 DNA was present in all technical and biological samples, corroborated by two independent laboratories. In 2007, the GMO-content in the samples ranged up to 44?% in the bioaerosols and 49?% in the pollen pellets. In 2008, GMO-proportions of up to 18?% were detected. Discussion The results of this study provide evidence that NTOs in the Ruhlsdorfer Bruch were exposed to Bt-maize pollen under the cultivation conditions in 2007 with a buffer zone of 100?m. The GMO-content reached up to 48?%. The results of the monitoring in 2008 confirmed these findings. Even though the exposure could be reduced by increasing the isolation distances to 250?m and 500?m respectively, the results still show percentages of up to 18?% Bt-MON810 in the pollen samples. The results on maize pollen deposition at the Ruhlsdorfer Bruch in 2007 and 2008 correspond to the results of an investigation which was conducted over several years applying the same standardised method, but covering a wider range of distances. The correlation between maize pollen deposition (n/m²) and distance to the source field (m) fitted best to a power function of the type y = 1.2086 · 10⁶ · x ^–0.548. Despite the same trend, the pollen deposition in the Ruhlsdorfer Bruch revealed above-average findings. Also the analysis of the pollen pellets collected by the bees showed an exposure in 2007 with values for the GMO-content of up to 49?%. For both methods, the exposure decreased in 2008 due to the greater buffer zones up to 500?m. Whereas the GMO-content for the biological sampling were reduced to values below 10?%, the values for the technical sampling were still higher indicating that greater buffer zones would be necessary for safety reasons under the precautionary principle. Conclusions The results of this investigation proved that maize pollen were dispersed by wind to distances farther than 250?m from field edge leading to maize pollen exposure in the centre of the nature reserve. The results also demonstrated that foraging NTOs living in the nature reserve were exposed to maize pollen from surrounding fields. Considering the cultivation of Bt-maize MON810, the assumption of the Environmental Risk Assessment (ERA) that there will be no relevant exposure beyond the Bt-maize fields, cannot be confirmed. Considering the results of this and related studies and with respect to the precautionary principle, one can state that buffer zones between Bt-maize fields and protected areas are an effective measure to minimise the exposure of Bt-maize pollen to NTOs and, thus, to prevent from adverse effects. Recommendations and perspectives Because of still insufficient ecotoxicological data for the risk assessment of Bt-maize MON810 considering butterflies and other protected NTOs, protection standards assuring the precautionary principle have to be implemented to avoid Bt-maize pollen exposure to NTOs. This applies for the case Ruhlsdorfer Bruch and for nature reserve areas in general. In order to exclude risks to protected NTOs occurring in nature reserves, sufficient buffer zones for Bt-maize cultivation should be considered. The statistical analysis revealed that distances of more than 500?m are necessary to decisively reduce exposure to foraging insects. In fact, distances of more than 1,000?m are necessary to prevent maize pollen deposition from values above 100,000 pollen/m² with a certainty of 90?%. An adequate risk assessment can only be attained if based on field measurements accounting for the high variation of pollen deposition due to local environmental site conditions and field management. The monitoring should be based on standardised methods. It should include locations with the highest expected deposition rates, the boundaries of the protected areas and sites of interest within those boundaries, e.?g., specific habitats of sensitive species.     

Composting projects under the Clean Development Mechanism: sustainable contribution to mitigate climate change

The Clean Development Mechanism (CDM) of the Kyoto Protocol aims to reduce greenhouse gas emissions in developing countries and at the same time to assist these countries in sustainable development. While composting as a suitable mitigation option in the waste sector can clearly contribute to the former goal there are indications that high rents can also be achieved regarding the latter. In this article composting is compared with other CDM project types inside and outside the waste sector with regards to both project numbers and contribution to sustainable development. It is found that, despite the high number of waste projects, composting is underrepresented and a major reason for this fact is identified. Based on a multi-criteria analysis it is shown that composting has a higher potential for contribution to sustainable development than most other best in class projects. As these contributions can only be assured if certain requirements are followed, eight key obligations are presented.     

Geologic processes influence the effects of mining on aquatic ecosystems

Geologic processes strongly influence water and sediment quality in aquatic ecosystems but rarely are geologic principles incorporated into routine biomonitoring studies. We test if elevated concentrations of metals in water and sediment are restricted to streams downstream of mines or areas that may discharge mine wastes. We surveyed 198 catchments classified as "historically mined" or "unmined," and based on mineral-deposit criteria, to determine whether water and sediment quality were influenced by naturally occurring mineralized rock, by historical mining, or by a combination of both. By accounting for different geologic sources of metals to the environment, we were able to distinguish aquatic ecosystems limited by metals derived from natural processes from those due to mining. Elevated concentrations of metals in water and sediment were not restricted to mined catchments; depauperate aquatic communities were found in unmined catchments. The type and intensity of hydrothermal alteration and the mineral deposit type were important determinants of water and sediment quality as well as the aquatic community in both mined and unmined catchments. This study distinguished the effects of different rock types and geologic sources of metals on ecosystems by incorporating basic geologic processes into reference and baseline site selection, resulting in a refined assessment. Our results indicate that biomonitoring studies should account for natural sources of metals in some geologic environments as contributors to the effect of mines on aquatic ecosystems, recognizing that in mining-impacted drainages there may have been high pre-mining background metal concentrations.