Nitrate Dynamics in Two Streams Impacted by Wastewater Treatment Plant Discharge: Point Sources or Sinks?

We examined nitrate processing in headwater stream reaches downstream of two wastewater treatment plant outfalls during low streamflow. Our objectives were to quantify nitrate mass flux before and after effluent discharge and to use field and laboratory techniques to assess the mechanism of nitrate uptake. Microcosm experiments were utilized to determine the location of nitrate processing, and molecular biomarkers were used to detect and quantify microbial denitrification. At one site, downstream nitrate mass flux was significantly (p = 0.01) lower than sum of upstream and wastewater effluent fluxes, indicating rapid stream assimilation of incoming nitrate in the vicinity of the point source. Microcosm experiments supported the theory that nitrate processing occurs in sediments. Molecular assays for denitrifcation‐associated functional genes nosZ, nirS, and nirK, provided evidence that effluent contained enriched denitrifying communities relative to ambient stream water. Nitrate loss at the site with greater uptake was correlated with sulfate loss (p < 0.01; r² = 0.86), suggesting a possible link between sulfate reducing bacteria and denitrifying bacterial communities. Results suggest there is an opportunity to better understand nitrate dynamics in cases where point sources may act as point sinks under specific sets of conditions.     

Transport of silver nanoparticles (AgNPs) in soil

The effect of soil properties on the transport of silver nanoparticles (AgNPs) was studied in a set of laboratory column experiments, using different combinations of size fractions of a Mediterranean sandy clay soil. The AgNPs with average size of ∼30 nm yielded a stable suspension in water with zeta potential of −39 mV. Early breakthrough of AgNPs in soil was observed in column transport experiments. AgNPs were found to have high mobility in soil with outlet relative concentrations ranging from 30% to 70%, depending on experimental conditions. AgNP mobility through the column decreased when the fraction of smaller soil aggregates was larger. The early breakthrough pattern was not observed for AgNPs in pure quartz columns nor for bromide tracer in soil columns, suggesting that early breakthrough is related to the nature of AgNP transport in natural soils. Micro-CT and image analysis used to investigate structural features of the soil, suggest that soil aggregate size strongly affects AgNP transport in natural soil. The retention of AgNPs in the soil column was reduced when humic acid was added to the leaching solution, while a lower flow rate (Darcy velocity of 0.17 cm/min versus 0.66 cm/min) resulted in higher retention of AgNPs in the soil. When soil residual chloride was exchanged by nitrate prior to column experiments, significantly improved mobility of AgNPs was observed in the soil column. These findings point to the importance of AgNP-soil chemical interactions as a retention mechanism, and demonstrate the need to employ natural soils rather than glass beads or quartz in representative experimental investigations.     

Diversity and distribution of riparian plant communities in relation to stream size and eutrophication

The present study was conducted in 47 different riparian areas distributed throughout Denmark to investigate diversity and distributional patterns of plant communities along a lowland stream size gradient (first to fifth order). The investigated areas were representative for Danish riparian areas not in use for agricultural production. We investigated plant community richness along a stream size gradient and the influence of eutrophication on the abundance of different plant communities. Vegetation analyses were performed in transects placed perpendicular to the stream channel, with a total of 1798 plots analyzed. Overall, we found a positive relationship between stream mean depth as a measure of stream size and the number of plant community types identified in the riparian areas. We also found that the abundance of the identified communities was positively correlated with their nutrient preference and negatively correlated with their moisture preference. The abundance of alkaline fens and Molinia meadows (protected community types) in riparian areas decreased with increasing size of the stream, whereas the abundance of humid meadows and wet herb fringes increased with increasing size of the stream. Based on our findings, we recommend that wide buffer zones be established along streams with protected habitat types in the associated riparian areas to reduce the direct impact from agriculture. Furthermore, we recommend that wide buffer zones be established along middle-sized and large streams because several community types may develop.     

Quality control for sampling of PCDD/PCDF emissions from open combustion sources

Both long duration (>6 h) and high temperature (up to 139 °C) sampling efforts were conducted using ambient air sampling methods to determine if either high volume throughput or higher than ambient air sampling temperatures resulted in loss of target polychlorinated dibenzodioxins/dibenzofurans (PCDDs/PCDFs) from a polyurethane foam (PUF) sorbent. Emissions from open burning of simulated military forward operating base waste were sampled using EPA Method TO-9A for 185 min duration using a filter/PUF/PUF in series combination. After a 54 m³ sample was collected, the sampler was removed from the combustion source and the second PUF was replaced with a fresh, clean PUF. An additional 6 h of ambient air sampling (171 m³) was conducted and the second PUF was analyzed to determine if the PCDD/PCDF transferred from the filter and the first PUF. Less than 4.4% of the initial PCDD/PCDF was lost to the second PUF. To assess the potential for blow off of PCDD/PCDF analytes during open air sampling, the mobility of spiked mono- to hepta-PCDD/PCDF standards across a PUF sorbent was evaluated from ambient air temperatures to 145 °C with total volumes between 600 L and 2400 L. Lower molecular weight compounds and higher flow amounts increased release of the spiked standards consistent with vapor pressure values. At 600 L total sampled volume, the release temperature for 1% of the tetra-CDD (the lowest chlorinated homologue with a toxic compound) was 87 °C; increasing the volume fourfold reduced this temperature to 73 °C.     

Laboratory study on leachability of five herbicides in South Australian soils

Abstract

Norflurazon, oxadiazon, oxyfluorfen, trifluralin and simazine are herbicides widely used in the vineyards of the Barossa Valley, South Australia. The leaching behaviour of norflurazon, oxadiazon, oxyfluorfen and trifluralin was investigated on four key soils in the Barossa Valley. Leaching potential on packed soil columns and actual mobility using intact soil columns were investigated. On the packed soil columns, norflurazon was the most leachable herbicide. More of the herbicides were detected in the leachates from the sandy soils (Mountadam and Nuriootpa) than from the clayey soils (Lyndoch and Tanunda). Organic matter is generally low in soils in the Barossa region. Porosity and saturated conductivity significantly affect herbicide movement and in the sandy Mountadam and Nuriootpa soils, the water flux is greater than for the higher clay content Lyndoch and Tanunda soils. Increasing the time interval between herbicide application and the incidence of “rainfall”; reduced the amounts of herbicides found in the leachates. The use of intact soil columns and including simazine for comparison showed that both norflurazon and simazine were present in the leachates. Simazine was the first herbicide to appear in leachates. Sectioning of the intact soil columns after leaching clearly demonstrated that norflurazon and simazine reached the bottom of the soil columns for all soils studied. Greater amounts of norflurazon were retained in the soil columns compared with simazine. The other herbicides were mostly retained in the initial sections of the soil columns.     

SoilTrEC: a global initiative on critical zone research and integration

Soil is a complex natural resource that is considered non-renewable in policy frameworks, and it plays a key role in maintaining a variety of ecosystem services (ES) and life-sustaining material cycles within the Earth's Critical Zone (CZ). However, currently, the ability of soil to deliver these services is being drastically reduced in many locations, and global loss of soil ecosystem services is estimated to increase each year as a result of many different threats, such as erosion and soil carbon loss. The European Union Thematic Strategy for Soil Protection alerts policy makers of the need to protect soil and proposes measures to mitigate soil degradation. In this context, the European Commission-funded research project on Soil Transformations in European Catchments (SoilTrEC) aims to quantify the processes that deliver soil ecosystem services in the Earth's Critical Zone and to quantify the impacts of environmental change on key soil functions. This is achieved by integrating the research results into decision-support tools and applying methods of economic valuation to soil ecosystem services. In this paper, we provide an overview of the SoilTrEC project, its organization, partnerships and implementation.     

Atmospheric Tracer Techniques and Gas Transport in the Primary Aluminum Industry

The results of 35 Individual SF₆ tracer tests conducted in Norway during 1978 demonstrate the applicability of tracer techniques to the study of a wide variety of pollutant transport problems found in the primary aluminum industry. Tracer methods were employed to determine the efficiency of the pollutant control system over a single reduction cell under a variety of operating conditions. Two tests conducted during normal operation gave efficiencies equal to 100 ±19% and 79 ± 12%, while a test performed during the occurrence of an anode effect yielded an efficiency equal to 66 ± 22%.

Tracer investigations of flow in the wake of a smelter hall indicated that between 1 % and 11 % of secondary, roof-top emissions can become entrained in the recirculation cavity and reenter the hall through the ventilation fresh air supply. These reentry rates were observed for release heights as high as 8 m above the existing roof exhaust duct. Tracer dispersion data collected within 20 building heights of the smelter agreed very well with extrapolations of McEIroy- Pooler dispersion curves for an urban area. Dispersion curves determined from a previous wind tunnel study of flow downwind of an isolated building underestimated dispersion downwind of the vs.melter complex.

The total fluoride mass flow rate measured downwind of a smelter during wet, foggy conditions indicated that wet removal rates of fluorides are in the range 3.2 × 10^?4/s to 6.4 × 10^?4/s. Simulation of the source with several tracer point releases and simultaneous measurement of fluoride and tracer ground-level concentrations downwind of the smelter eliminated the need for measurements of vertical profiles of wind speed and fluoride concentration during the experiment.     

Avoiding Land Disposal of Hazardous Waste

In response to a growing societal mandate, land disposal of hazardous wastes is gradually being replaced by treatment technologies. This shift to "alternative technologies" is the result of the impacts of past land disposal practices on other environmental media (groundwater, surface water, and air). A prime motivation for adopting alternatives to land disposal is to eliminate these cross-media impacts. Alternative technologies, however, can themselves have cross-media environmental impacts which must be recognized and addressed before such technologies are extensively applied. This paper discusses hazardous waste constituents, common disposal practices, alternative technologies currently being applied, possible cross-media environmental impacts of the alternative technologies, and proposed methods of mitigating these environmental impacts. Case studies from uncontrolled hazardous waste sites and industrial operations are used to illustrate the application of alternative technologies. Case studies include the application of waste treatment technologies as well as the adoption of waste minimization techniques.     

Performance and Diagnostic Evaluation of Ozone Predictions by the Eta-Community Multiscale Air Quality Forecast System during the 2002 New England Air Quality Study

Abstract

A real-time air quality forecasting system (Eta-Community Multiscale Air Quality [CMAQ] model suite) has been developed by linking the National Centers for Environmental Estimation Eta model to the U.S. Environmental Protection Agency (EPA) CMAQ model. This work presents results from the application of the Eta-CMAQ modeling system for forecasting ozone (O₃) over the Northeastern United States during the 2002 New England Air Quality Study (NEAQS). Spatial and temporal performance of the Eta-CMAQ model for O₃ was evaluated by comparison with observations from the EPA Air Quality System (AQS) network. This study also examines the ability of the model to simulate the processes governing the distributions of tropospheric O₃ on the basis of the intensive datasets obtained at the four Atmospheric Investigation, Regional Modeling, Analysis, and Estimation (AIRMAP) and Harvard Forest (HF) surface sites. The episode analysis reveals that the model captured the buildup of O₃ concentrations over the northeastern domain from August 11 and reproduced the spatial distributions of observed O₃ very well for the daytime (8:00 p.m.) of both August 8 and 12 with most of normalized mean bias (NMB) within [H11006]20%. The model reproduced 53.3% of the observed hourly O₃ within a factor of 1.5 with NMB of 29.7% and normalized mean error of 46.9% at the 342 AQS sites.The comparison of modeled and observed lidar O₃ vertical profiles shows that whereas the model reproduced the observed vertical structure, it tended to overestimate at higher altitude. The model reproduced 64 –77% of observed NO₂ photolysis rate values within a factor of 1.5 at the AIRMAP sites. At the HF site, comparison of modeled and observed O₃/nitrogen oxide (NO_x) ratios suggests that the site is mainly under strongly NO_x-sensitive conditions (>53%). It was found that the modeled lower limits of the O₃ production efficiency values (inferred from O₃-CO correlation) are close to the observations.     

Synthesis of the two minor isomers, delta- and epsilon-1,2,5,6,9,10-hexabromocyclododecane, present in commercial hexabromocyclododecane

Hexabromocyclododecane (HBCD) is prepared commercially by bromination of cis,trans,trans-cyclododecatriene (ctt-CDT) and widely used as a flame retardant, particularly in polystyrene foams. Commercial HBCD consists largely of three diastereomers, alpha-, beta-, and gamma-HBCD, the structures of which have been known for many years. Recently, the presence in the mixture of small amounts of two minor diastereomers, delta- and epsilon-HBCD, has been reported. Bearing in mind the manner in which commercial HBCD is generated, it was anticipated that these components are probably formed by bromination of trans,trans,trans-cyclododecatriene (ttt-CDT), a common contaminant in commercial ctt-CDT. Indeed, when a sample of ttt-CDT was brominated it gave two products, the NMR spectra and LC/MS and GC/MS behaviour of which confirmed that they are identical to the minor components, delta- and epsilon-HBCD, present in commercial HBCD.