Health risks of residential wood heat

The resurgence in the use of wood in the United States for residential heating has been accompanied by a dramatic increase in deaths and injuries from residential fires. Toxic materials present in woodsmoke also appear to present a significant public health hazard. As a result of these factors, production of residential wood heat can be up to two orders of magnitude more hazardous than generation of an equivalent amount of electric energy at a coal-fired power plant. Proper care in installation and operation of wood stoves, as well as technological innovations that control wood-stove emissions, can greatly reduce the health and safety hazards of residential heating with wood.     

Inhibition of trout gill and soybean lipoxygenases by organotin compounds

Activity of trout gill and soybean lipoxygenase was inhibited by various low concentrations of tri-n-butyltin, di-n-butyltin and n-butyltin chlorides at pH 7.8. Tri-n-butyltin (0.044-0.19 mM; 8-100% inhibition) was significantly more inhibitory against trout gill lipoxygenase than di-n-butyltin (0.1-0.27 mM; 17-39% inhibition) or n-butyltin (1.2-3.6 mM; 26-43% inhibition). Soybean lipoxygenase displayed a similar sensitivity to the inhibitory effects of organotin compounds at pH 7.8. Although tri-n-butyltin (0.067-0.2 mM; 13-68% inhibition) was less inhibitory to soybean lipoxygenase, di-n-butyltin (0.134-0.537 mM; 51-75% inhibition) and n-butyltin (0.41-1.23 mM; 33-75% inhibition) were more inhibitory towards soybean lipoxygenase compared with trout gill lipoxygenase. Concentrations of butyltins required to provide substantial inhibition of trout gill lipoxygenase were of the order of magnitude of those reported for lethal water exposure concentrations of these compounds for trout and other fishes when bioaccumulation factors are considered. Thus, it is proposed that inhibition of lipoxygenase likely contributes to the biocidal activity of organotin compounds.     

Stabilization/solidification of ashes in clays used in the manufacturing of ceramic bricks.

This paper presents the results of the lixiviation of metals from different mixtures of fly and bottom ashes that have been stabilized and solidified in clays used in the manufacture of bricks. The ashes used for this study were obtained from a Hoffmann-type brick furnace adapted for the incineration of municipal solid waste during the manufacturing of ceramic bricks. The ashes were stabilized in clay in different proportions of clay:ash mix (99:1, 95:5, 90:10, 80:20 and 60:40). Such mixes were used to manufacture bricks that were calcined at a temperature ranging from 50 to 1100 degrees C. The clay, ashes and manufactured bricks were characterized using X-ray diffraction, fluorescent X-ray, thermogravimetry, differential thermal analysis, atomic absorption spectroscopy and scanning electronic microscopy. In addition, toxicity characteristic leaching procedure lixiviation tests were performed according to the EPA 1311 method for the determination of heavy metals. The results showed an affinity between clay and ash, and also that the bricks manufactured with these mixtures present low lixiviation levels. The tests also showed the highest decrease in the concentration of arsenic, nickel, chromium, zinc and silver for 99:1 mixtures. The 95:5 mixture was found to be the most favourable for the stabilization (greater concentration decrease) of lead and cadmium. Selenium was the metal with the lowest concentration change whereas arsenic, nickel, chromium, zinc and cadmium showed the greatest concentration change in all mixtures, with the exception of cadmium in the mixture 99:1.     

Contaminants in Muscle of Plaice and Halibut Collected From the St. Lawrence Estuary and Northwest Atlantic

Levels of aromatic hydrocarbons in muscle or plaice and halibut were determined by fluorescence, using the chrysene standard, as recommended by the International Oceanographic Commision, for the analysis of PAH in environmental extracts. Concentrations were highest in muscle of halibut collected at the most contaminated, nearshore site, in the Saguenay Fjord of the St. Lawrence Estuary, compared to other locations further from shore. Although concentrations of fluorescing compounds were not statistically different in plaice, the saturated hydrocarbons displayed unquestionably more biodegradation, with a decrease of n-alkanes and increase of branched aliphatics, at the less contaminated site. Synchronous fluorescence indicated the presence of benzenoid and biphenyl hydrocarbons in the extracted mixtures, while GC-MS-TIC analysis tentatively identified the presence of a series of benzenoid (alkyl benzenes), chlorinated (PCB and DDE), N (trialkylamines) and O (phenols) hydrocarbons. These anthropogenic compounds could derive from petroleum products, surfactants and common products used in industry and households. This study emphasizes the importance of a multispectroscopic approach when investigating complex environmental mixtures.     

Solid waste management techniques for the waste generated and brought down from campsites in the hill spots, trails and expedition tops.

The increasing self-generated solid waste from the visitors in the hill towns, trails and expedition tops is one of the most adverse forms of human impacts in mountain environments. The direct managing authorities, such as municipalities in the hill spots, have no proper places to dispose of municipal waste nor the other infrastructure required nor adequate funds. The trekking and expedition areas are entirely dependent on the moral responsibilities of the local people, as well as visitors, because these locations are in remote areas, outside municipal boundaries. Based on five major case studies representing the Himalayas, the status of solid waste generation, its physical composition and management options in tourist [Kullu: 1,219 metres above average sea level (m), Rewalsar: 1,300 m, Manali: 2,050 m], trekking (in and around the Valley of Flowers: 1,830-4,330 m) and expedition areas (Pindari valley: 2,300-5,500 m) were studied. The inflow of visitors ranged from 150,000 to 1,140,251 in the hill spots, and from 25,000 to 116,392 in the expedition and trekking areas, respectively. The capita = t day 1 waste generation varied from 200-300 g in hill spots and from 200-288 g in expedition and trekking areas, respectively. Biodegradable waste varied from 65.2 to 83.1% of the total waste generated and was of greater quantity than non-biodegradable waste in expedition areas. Non-biodegradable waste was the predominant form in the expedition (66.4%) and trekking areas (84.5%). The ultimate aim of the study is to make the concerned local people, visitors and government aware of the need to harness energy from waste. This can be done in various ways including biocomposting, and the reuse and recycling of waste otherwise considered valueless and useless.     

Reestablishment of the Perdido Key Beach Mouse (Peromyscus polionotus trissyllepsis) on Gulf Islands National Seashore

Abstract: In April 1986, the endangered Perdido Key beach mouse (Peromyscus polionotus trissyllepsis) existed only as a small population of less than 30 animals on the western end of Perdido Key at Gulf State Park, Alabama This population was vulnerable to extinction from a variety of causes. Fifteen pairs of mice from Alabama were moved approximately 20 km on the same island to Gulf Islands National Seashore Florida between November 1986 and April 1988. The Alabama population was surveyed by live-trapping before each removal and showed a large increase during this study. Eleven pairs of mice were released into enclosures to stimulate burrowing and reduce dispersal at the release site. The last four pairs w e released unrestricted into the dune habitat Trapping in July 1988 revealed that virtually all available dune habitat (11,000 linear m; approximately 160 ha) had been occupied by the mice. Fifty-five individuals were captured including four of the released mice. Exchanges between the populations are recommended to prevent loss of genetic diversity. Future research should investigate demographics, dispersal pattern, and the application of DNA fingerprinting techniques to determine rates of gene flow in the population. The Perdido Key beach mouse provides an excellent model for studying the effects of a population bottleneck on genetic diversity and testing the predictions of population viability analysis.     

The Impact of Increased Environmental Stochasticity Due to Climate Change on the Dynamics of Asiatic Wild Ass

Abstract:  Theory proposes that increased environmental stochasticity negatively impacts population viability. Thus, in addition to the directional changes predicted for weather parameters under global climate change (GCC), the increase in variance of these parameters may also have a negative effect on biodiversity. As a case study, we assessed the impact of interannual variance in precipitation on the viability of an Asiatic wild ass ( Equus hemionus ) population reintroduced in Makhtesh Ramon Nature Reserve, Israel. We monitored the population from 1985 to 1999 to determine what environmental factors affect reproductive success. Annual precipitation during the year before conception, drought conditions during gestation, and population size determined reproductive success. We used the parameters derived from this model to assess population performance under various scenarios in a Leslie matrix type model with demographic and environmental stochasticity. Specifically, we used a change in the precipitation regime in our study area to formulate a GCC scenario and compared the simulated dynamics of the population with a no-change scenario. The coefficient of variation in population size under the global change scenario was 30% higher than under the no-change scenario. Minor die-offs (≥15%) following droughts increased extinction probability nearly 10-fold. Our results support the idea that an increase in environmental stochasticity due to GCC may, in itself, pose a significant threat to biodiversity.