微量臭氧催化氧化深度处理煤气化废水

采取固定床连续式水处理方式,实验研究了在固体催化剂作用下微量臭氧催化氧化深度处理地下煤气化废水的效果.结果表明,当处理COD为300 mg,/L左右的该类型废水时,加入微量臭氧,水处理装置COD去除率提高了45％,平均1 mg的臭氧处理了2.4 mg有机物;当废水COD为200 mg/L左右,进水速度为1 L/h时,最佳臭氧投加量为每升废水20 mg左右的臭氧,此时气水比为15:1左右;同时实验发现,不同COD的废水色度均可以被有效去除.通过与其他类似的实验研究比较发现,微量臭氧催化氧化技术具有成本优势.     

铝污泥吸附六价铬的特征和机理

铝污泥是给水处理过程中不可避免的副产物,为了解其资源化利用作为吸附剂对Cr(Ⅵ)的吸附行为和吸附特征,本研究通过静态实验研究了铝污泥的水解特征、Cr(Ⅵ)在铝污泥上的吸附机理和影响因素。结果表明,(1)铝污泥表面的主要官能团为羟基、SO24-和Cl-;(2)铝污泥与Cr(Ⅵ)的吸附过程中,液相中Cr(Ⅵ)的浓度随吸附时间延长而降低(由20 mg/L降为15.42 mg/L),同时,液相中pH由6.01升高为7.06、SO24-由8.79 mg/L升高为11.40 mg/L、Cl-由10.54 mg/L升高为11.88 mg/L,这一结果表明,HCrO4-与铝污泥表面的羟基、SO24-、Cl-等官能团交换,其吸附机理为配体交换;(3)pH是影响Cr(Ⅵ)在铝污泥上的吸附量的主要因素,当pH由4.0升高至10.0时,吸附容量由7.63 mg/g下降为0.70 mg/g。实验表明,铝污泥作为一种新型的Cr(Ⅵ)吸附剂具有较高吸附能力和应用前景,并为优化吸附工艺提供了技术支撑。     

Extreme Values in TSP Distribution Functions

The highest values in annual TSP distributions fall below the best-fit, log-normal straight line more than one would expect from ordinary sampling statistics but not dramatically so. The lowest values in annual TSP distributions overwhelmingly fall below the best-fit, log-normal straight line. The most highly improbable high values above the best-fit line in such distributions are very questionable and probably do not represent true air quality values. The most improbable cases of highest values falling below the best-fit, log-normal line are the result of data artifacts at the opposite end of the data distribution. They do not represent low probabilities and probably do represent true air quality values. The most improbable low values are all of highly doubtful validity.     

Waste Streams,Technology, and State Requirements

Biomedical wastes are generated by hospitals, laboratories, animal research facilities, and by other institutional sources. The disposal of these wastes is coming under critical public scrutiny, and regulations are being promulgated to control their disposal. Incineration is not a final disposal method since it generates a solid residue (ash) which must be buried or otherwise disposed. The incineration process, however, renders the waste non-toxic, non-hazardous, and non-putrescible, and reduces the volume of material for ultimate disposal by an order of magnitude. In some instances, the residue may have high levels of heavy metals; however, this is the exception rather than the rule.     

Simultaneous determination of organophosphorus and organonitrogen pesticides residues in Angelica sinensis

Gas chromatography with nitrogen phosphorus detector (GC-NPD) was applied to the simultaneous determination of 15 organophosphorus and 6 organonitrogen pesticides residues in Angelica sinensis. The pesticides were extracted by microwave-assisted extraction (MAE) and ultrasound-assisted extraction (UAE) techniques, respectively. The experimental variables were optimized through orthogonal array experimental design. Cleanup of extracts was performed with column chromatography using florisil and neutral aluminum as the sorbents. The determination of pesticides in the final extracts was carried out by GC-NPD. Under optimized conditions, the average recoveries obtained from MAE and UAE are in the range of 75.1–129% and 70.6–129%, respectively, and the relative standard deviations of MAE and UAE were 3.1–10.6% and 1.0–17.8%, respectively.     

强化混凝法处理煤气冷凝水

以包头钢铁(集团)有限责任公司高炉煤气冷凝水为处理对象,采用强化混凝法进行静态混凝沉淀对比实验。实验结果表明,当聚合氯化铝加入量为20mg/L、高分子纳米除氯剂加入量为2.0mL/L时,处理后出水SS小于10mg/L,浊度小于10NTU,氯离子去除率在80%以上,而且对废水中的其他离子也有一定的去除效果,出水水质基本接近工业冷却循环水回用指标。     

Novel Renewable Polyols Based on Limonene for Rigid Polyurethane Foams

Novel renewable polyols based on limonene were synthesized using thiol-ene “click” chemistry. These limonene based polyols were structurally characterized using wet methods (hydroxyl number, acid value and viscosity), gel permeation chromatography and spectroscopic methods. The results indicated that high yield of polyols from limonene based materials can be obtained using thiol-ene reaction. These limonene based polyols were used successfully for preparation of rigid polyurethane foams. These foams had regular shape cells and uniform cell size distribution. Thermal studies on these foams indicated that foams were thermally stable up to 250 °C. The glass transition temperature of the foams was higher than 200 °C. These rigid polyurethane foams had high compressive strength and the highest compressive strength of 195 kPa was observed. These foams have good physical–mechanical characteristics and could be suitable for all the applications of rigid polyurethane foams such as thermal insulation of freezers, storage tanks for the chemical and food industries, and packing materials for food industries.     

仿酶型磁性Fe~0-Fe_3O_4复合催化剂的制备及其催化性能

采用原位氧化沉淀法制备出仿酶型磁性Fe0-Fe_3O_4复合催化剂,并将其作为非均相类Fenton催化剂用于溶液中对硝基苯酚的降解;采用SEM和XRD等技术对催化剂进行了表征。表征结果显示,Fe_3O_4与Fe0结合牢固,有利于Fe0的分散。实验结果表明:Fe0-Fe_3O_4对对硝基苯酚的降解为拟一级反应;在Fe0与Fe_3O_4的质量比为0.75、Fe0-Fe_3O_4投加量为1.2 g/L、初始H_2O_2浓度为10 mmol/L、初始溶液p H为3、反应温度为30℃的条件下反应90min,反应速率常数为0.067 min-1,COD去除率为77.28%,Fe溶出量为2.12 mg/L;在对硝基苯酚的降解过程中,pH先增大后减小,Fe溶出量先降低后升高;Fe0-Fe_3O_4是一种稳定的催化剂,可再生使用。     

再生铅冶炼行业典型工艺的铅污染物质流分析

将物质流分析应用于我国再生铅冶炼行业典型工艺(铅膏炼前预脱硫—还原熔炼—精炼)的铅污染研究,构建了再生铅冶炼过程的铅元素流图,并针对铅污染提出了应对措施。研究结果表明:再生铅典型工艺的铅直收率、铅回收率、铅废物循环利用率分别为85.38%,93.96%,97.57%;应重点监控的铅有组织排放依次为外排烟气、熔炼渣、脱硫石膏渣;针对外排烟气中铅烟尘的PM2.5占比高及铅烟尘活性较高易于释放的特点,应选用高效除尘器,进一步提高细烟尘的捕集率;铅无名损失的重点工序依次为熔炼工序、电解精炼工序、合金熔铸工序;冶炼烟尘返回熔炼炉时,应增加制粒工序,以降低熔炼炉的烟尘率。     

Odour emission characteristics of 22 recreational rivers in Nanjing

The odour emission characteristics of 22 recreational rivers in Nanjing were investigated and analysed. Eight odorous compounds (ammonia (NH₃), hydrogen sulphide (H₂S), sulphur dioxide (SO₂), carbon disulphide (CS₂), nitrobenzene (C₆H₅NO₂), aniline (C₆H₅NH₂), dimethylamine (C₂H₇N), and formaldehyde (HCHO)) were measured in odour emission samples collected using a custom-made emission flux hood chamber. The results showed that all odorants were detected in all monitoring rivers. NH₃ was the main odorant, with emission rates ranging from 4.86 to 15.13 μg/min m². The total odour emission rate of the Nan River, at 1 427.07 OU/s, was the highest of the all investigated rivers. H₂S, NH₃ and nitrobenzene were three key odour emission contributors according to their contributions to the total odour emission. A correlation analysis of the pollutants showed there was a significant positive correlation between the emission rate of NH₃ and the concentration of ammonia nitrogen (NH₄ ⁺-N) and total nitrogen (TN). The H₂S and SO₂ emission rates had a significant positive correlation with sulphides (S^2?) and available sulphur (AS) in the water and sediment. The content of TN, NH₄ ⁺-N, S^2? and AS in the water and sediment affected the concentration of H₂S, SO₂ and NH₃ in the emission gases. NH₄ ⁺-N, S^2? and AS are suggested as the key odour control indexes for reducing odours emitted from these recreational rivers. The study provides useful information for effective pollution control, especially for odour emission control for the recreational rivers of the city. It also provides a demonstrate example to show how to monitor and assess a contaminated river when odour emission and its control need to be focused on.