Linking biosensor responses to Cd, Cu and Zn partitioning in soils

Soils bind heavy metals according to fundamental physico-chemical parameters. Bioassays, using bacterial biosensors, were performed in pore waters extracted from 19 contrasting soils individually amended with Cd, Cu and Zn concentrations related to the EU Sewage Sludge Directive. The biosensors were responsive to pore waters extracted from Zn amended soils but less so to those of Cu and showed no toxicity to pore water Cd at these environmentally relevant amended concentrations. Across the range of soils, the solid-solution heavy metal partitioning coefficient (K(d)) decreased (p<0.01) with increasing amendments of Cu and Zn; Cu exhibited the highest K(d) values. Gompertz functions of Cu and Zn, K(d) values against luminescence explained the relationship between heavy metals and biosensors. Consequently, biosensors provide a link between biologically defined hazard assessments of metals and standard soil-metal physico-chemical parameters for determining critical metal loadings in soils.     

Roughness and slipperiness of floor surface: Tactile sensation and perception

The slipperiness of floor is one of the risk factors affecting the occurrence of slipping and falling. The purpose of the study was to compare the roughness and slipperiness of five floor surfaces based on tactual sensations from different body segments for human subjects. The perceived roughness and perceived floor slipperiness of five floors based on tactual sensation from 20 male and 20 female subjects were collected and compared. The female subjects tended to give higher subjective ratings on both perceived roughness and slipperiness than their male counterpart. Both index fingertip and palm were more sensitive than foot in the sensation of floor roughness. The differences among fingertip, palm, and foot in the perceived floor slipperiness were not statistically different. The regression analysis results indicated that floor roughness parameter R_a is a better predictor in predicting both the perceived floor roughness and perceived floor slipperiness than the COF of the floor.     

Subsurface application of poultry litter and its influence on nutrient losses in runoff water from permanent pastures

Environmental pressure to reduce nutrient losses from agricultural fields has increased in recent years. To abate this nutrient loss to the environment, better management practices and new technologies need to be developed. Thus, research was conducted to evaluate if subsurface banding poultry litter (PL) would reduce nitrogen (N) and phosphorus (P) loss in surface water runoff using a four-row prototype implement. Rainfall simulations were conducted to create a 40-min runoff event in an established bermudagrass (Cynodon dactylon L.) pasture on soil types common to the Coastal Plain and Piedmont regions. The Coastal Plain soil type was a Marvyn loamy sand (fine-loamy, kaolinitic, thermic Typic Kanhapludults) and the Piedmont soil type was a Hard Labor loamy sand (fine, kaolinitic, thermic Oxyaquic Kanhapludults). Treatments consisted of surface- and subsurface-applied PL at a rate of 9 Mg ha(-1), surface broadcast-applied commercial fertilizer (CF; urea and triple superphosphate blend) at the equivalent N (330 kg N ha(-1)) and P (315 kg N ha(-1)) content of PL, and a nonfertilized control. The greatest loss for inorganic N, total N, dissolved reactive P (DRP), and total P occurred with the surface broadcast treatments, with CF contributing to the greatest loss. Nutrient losses from the subsurface banded treatment reduced N and P in surface water runoff to levels of the control. Subsurface banding of PL reduced concentrations of inorganic N 91%, total N 90%, DRP 86%, and total P 86% in runoff water compared with surface broadcasted PL. These results show that subsurface band-applied PL can greatly reduce the impact of N and P loss to the environment compared with conventional surface-applied PL and CF practices.     

Mycorrhizal fungal identity and diversity relaxes plant-plant competition

There is a great interest in ecology in understanding the role of soil microbial diversity for plant productivity and coexistence. Recent research has shown increases in species richness of mutualistic soil fungi, the arbuscular mycorrhizal fungi (AMF), to be related to increases in aboveground productivity of plant communities. However, the impact of AMF richness on plant-plant interactions has not been determined. Moreover, it is unknown whether species-rich AMF communities can act as insurance to maintain productivity in a fluctuating environment (e.g., upon changing soil conditions). We tested the impact of four different AMF taxa and of AMF diversity (no AMF, single AMF taxa, and all four together) on competitive interactions between the legume Trifolium pratense and the grass Lolium multiflorum grown under two different soil conditions of low and high sand content. We hypothesized that more diverse mutualistic interactions (e.g., when four AMF taxa are present) can ease competitive effects between plants, increase plant growth, and maintain plant productivity across different soil environments. We used quantitative PCR to verify that AMF taxa inoculated at the beginning of the experiment were still present at the end. The presence of AMF reduced the competitive inequality between the two plant species by reducing the growth suppression of the legume by the grass. High AMF richness enhanced the combined biomass production of the two plant species and the yield of the legume, particularly in the more productive soil with low sand content. In the less productive (high sand content) soil, the single most effective AMF had an equally beneficial effect on plant productivity as the mixture of four AMF. Since contributions of single AMF to plant productivity varied between both soils, higher AMF richness would be required to maintain plant productivity in heterogeneous environments. Overall this work shows that AMF diversity promotes plant productivity and that AMF diversity can act as insurance to sustain plant productivity under changing environmental conditions.     

Biodegradation of superabsorbent polymers in soil

Biodegradation of two superabsorbent polymers, a crosslinked, insoluble polyacrylate and an insoluble polyacrylate/ polyacrylamide copolymer, in soil by the white-rot fungus, Phanerochaete chrysosporium was investigated. The polymers were both solubilized and mineralized by the fungus but solubilization and mineralization of the copolymer was much more rapid than of the polyacrylate. Soil microbes poorly solublized the polymers and were unable to mineralize either intact polymer. However, soil microbes cooperated with the fungus during polymer degradation in soil, with the fungus solubilizing the polymers and the soil microbes stimulating mineralization. Further, soil microbes were able to significantly mineralize both polymers after solubilization by P. chrysosporium grown under conditions that produced fungal peroxidases or cellobiose dehydrogenase, or after solubilization by photochemically generated Fenton reagent. The results suggest that biodegradation of these polymers in soil is best under conditions that maximize solubilization.     

Genetic relationships within and between clonal and solitary forms of the sea anemone Anthopleura elegantissima revisited: evidence for the existence of two species

Along the temperate Pacific coast of North America, the actiniarian sea anemone Anthopleura elegantissima exhibits two discrete life-history phenotypes. Although both forms sexually produce planula larvae, the clonal morph can also asexually propagate by fission, whereas the solitary morph does not. Whether the two forms constitute one or two species has long been contested. Hand originally designated the two forms as conspecifics, whereas Francis – on the basis of differences in microhabitat, biogeographic range and phenotypic frequencies – argued that the two forms constituted a sibling-species pair. From the results of an electrophoretic survey in which they pooled allelic frequencies across several geographic locations, Smith and Potts subsequently argued that the two forms were not genetically differentiated, and therefore represented a single species. We re-examined the relationship between the forms electrophoretically, substantially extending the geographic range and doubling the sample sizes beyond those used by Smith and Potts, and not pooling allelic frequencies in our analyses. Our analysis of patterns of genetic variation at ten highly polymorphic allozyme loci shows that although no fixed genetic differences distinguish the two forms, there are significant differences in allele frequencies between clonal and solitary A.␣elegantissima at every site we sampled throughout their range of sympatry (over 1000 km); within each form, however, there is little detectable genetic differentiation among populations. We therefore conclude that the two forms represent recently reproductively isolated taxa, and propose that the clonal form retain the binomial A. elegantissima (Brandt, 1835), whereas the solitary form be described and named a new species, Anthopleura sp. Received: 28 August 1996 / Accepted: 25 September 1996     

A multispecies test of source–sink indicators to prioritize habitat for declining populations

For species at risk of decline or extinction in source–sink systems, sources are an obvious target for habitat protection actions. However, the way in which source habitats are identified and prioritized can reduce the effectiveness of conservation actions. Although sources and sinks are conceptually defined using both demographic and movement criteria, simplifications are often required in systems with limited data. To assess the conservation outcomes of alternative source metrics and resulting prioritizations, we simulated population dynamics and extinction risk for 3 endangered species. Using empirically based habitat population models, we linked habitat maps with measured site‐ or habitat‐specific demographic conditions, movement abilities, and behaviors. We calculated source–sink metrics over a range of periods of data collection and prioritized consistently high‐output sources for conservation. We then tested whether prioritized patches identified the habitats that most affected persistence by removing them and measuring the population response. Conservation decisions based on different source–sink metrics and durations of data collection affected species persistence. Shorter time series obscured the ability of metrics to identify influential habitats, particularly in temporally variable and slowly declining populations. Data‐rich source–sink metrics that included both demography and movement information did not always identify the habitats with the greatest influence on extinction risk. In some declining populations, patch abundance better predicted influential habitats for short‐term regional persistence. Because source–sink metrics (i.e., births minus deaths; births and immigrations minus deaths and emigration) describe net population conditions and cancel out gross population counts, they may not adequately identify influential habitats in declining populations. For many nonequilibrium populations, new metrics that maintain the counts of individual births, deaths, and movement may provide additional insight into habitats that most influence persistence.