Estimation of the contribution of a municipal waste incinerator to the overall emission and human intake of PCBs in Wilrijk, Flanders

The contribution of the emission of PCBs by a municipal waste incinerator in Wilrijk, a relatively industrialized district in the largest city of Flanders, to the total emission to air and to the total human intake was estimated. Therefore it was compared to the emission of PCBs by evaporation from PCB containing applications (transformers, capacitors, paint, ink, etc.) and to the intake of PCBs with food. As there was a lack of PCB data from the incinerator, the PCB emission concentration was estimated using three different approaches. A PCB measurement of the incinerator emission, performed later on, fell within the predicted range of 0.0004-0.005 ng TEQ/Nm3. Emission of PCBs from PCB containing applications and intake from food were deduced from information available on Flemish and European level. The results indicate a PCB contribution from the incinerator to local emissions between 0.3% and 3% of the emission from PCB containing applications and a contribution to human intake less than 6 x 10(-4)% of the intake from food.     

Temporal-spatial trends in heavy metal contents in sediment-derived soils along the Sea Scheldt river (Belgium)

The aim of this study was to survey the alluvial plains of the Sea Scheldt river in Belgium for the presence of old sediment-derived soils, and to appraise the heavy metal contamination at these sites. Historically, sediments of periodical dredging operations have been disposed in the alluvial plain without concern for the potential presence of contaminants. Up to 96% of the areas that were affected by sediment disposal (ca. 120 ha) was found to be polluted by at least one of the metals Cd, Cr, Zn or Pb. Concentrations of Cd, Cr and Zn were, in 10% of the cases, higher than 14, 1400 and 2200 mg/kg DM, respectively. Based on the Flemish decree on soil sanitation, Cu and Ni concentrations were of less environmental concern on any site. The pollution in the Sea Scheldt alluvial plain nevertheless is lower than for the Upper Scheldt alluvial plain. The sediment-derived soils in the most upstream part near Ghent were used for disposal of sediments from dredging operations elsewhere. Metal concentrations were explored and both spatial and temporal trend were analysed. The pollution levels encountered warrant caution as most of the soils affected by historical dredged sediment disposal are currently in use for pasture.     

Medium-term impacts of hydraulic clam dredgers on a macrobenthic community of the Adriatic Sea (Italy)

Hydraulic dredging targeting the bivalve Chamelea gallina in the northern and central Adriatic Sea has been taking place for over 30 years. In the period 2000–2001, 73 commercial dredgers harvested the resource within the sandy coastal area of the Ancona Maritime District (central Adriatic Sea). Despite this, no study aimed at investigating the impact of the fishery on the macrobenthic community of the area has ever been carried out. Sampling was done at 6 monthly intervals in an attempt to relate the impact of hydraulic dredging to different levels of fishing intensity. Data regarding two depth strata (4–6; 7–10 m) were analysed separately by means of permutational multivariate analysis of variance. The results revealed an overall condition of moderate disturbance within the benthic community, especially so within the 4–6 m depth stratum. The response of the benthic community to varying intensities of fishing activity was rapid, occurring within 6 months. Differences in the response of benthic community to differing intensities of fishing activity were found between the two depth strata considered. Significant differences in multivariate location of the benthic community were revealed between the three disturbance levels in both depth strata. Differences in multivariate dispersion were detected above a threshold level of fishing intensity, only within the shallow community. Differences were found between depth strata relating to species diversity and evenness, with significant differences between levels of fishing intensity being evident only within the 4–6 m depth stratum. The results emphasised that, even in a benthic community that is typical of a moderately disturbed environment, the effects of fishing on community structure were still discernible over and above the natural variation.     

Removal of the herbicide amitrole from water by anodic oxidation and electro-Fenton

Here we demonstrate that an aqueous solution of the herbicide amitrole can be completely depolluted at pH 3.0 by anodic oxidation and electro-Fenton process. Anodic oxidation gives faster degradation with a boron-doped diamond anode than with a Pt anode. Electro-Fenton with a Pt anode and 1 mmol l ^–1 Fe²⁺ as catalyst yields the quickest depollution. Amitrole decay always follows a pseudo first-order reaction. NO₃^– and NH₄⁺ are accumulated in the medium during mineralization, although volatile N-products are also formed. These environmentally friendly electrochemical treatments could be applied to the remediation of wastewaters containing amitrole.     

Electrostatic Precipitation Tests with Fuel Oil Ash

The main characteristics of the electrostatic collection of fuel oil ash has been investigated at a pilot precipitator installed in a laboratory rig. The relationship between collection efficiency, dust concentration and air velocity is studied and the influence of the spacing between the collection plates on both efficiency and effective migration velocity is discussed. Emphasis is put on the high degrees of efficiency attainable under suitable operating conditions.     

Dragutin T. Mihailović, Igor Balaž and Darko Kapor: Time and methods in environmental interfaces modelling: personal insights

Environmental Fluid Mechanics -     

Image processing tools in the study of environmental contamination by microplastics: reliability and perspectives

Environmental Science and Pollution Research - Microplastic pollution is one of the greatest environmental concerns for contemporary times and the future. In the last years, the number of...     

The effect of insecticides on the non-target predatory mite Kampimodromus aberrans: Laboratory studies

The side-effects of pesticides on predatory mites have been investigated at various levels and international teams (e.g., the IOBC/wprs Working Group “Pesticides and beneficial organisms”) have selected a few species of predatory mites occurring in Central and Northern Europe as representative for such studies. Key biocontrol species occurring in Southern Europe have received much less attention. Kampimodromus aberrans is the most important predator of herbivorous mites in South-European vineyards treated with selective pesticides. The impact of pesticides on K. aberrans populations has been studied in field conditions whereas few toxicological tests have been conducted in the laboratory because of difficulties in rearing this species. A method for rearing K. aberrans in the laboratory has recently been set up allowing toxicological studies to be conducted. In this paper, a toxicological method to assess the effects of pesticides on K. aberrans is described and the effects of insecticides frequently used in European vineyards on two K. aberrans strains are reported. These strains were collected from vineyards treated with organophosphates. Insecticides characterized by different modes of action were selected for trials. Among these, etofenprox and spinosad were classified as harmful to predatory mites. Chlorpyrifos reduced predatory mite fecundity, and was classified as moderately harmful for both strains. The toxicity of thiamethoxam and flufenoxuron varied with the strain (low to moderate). Indoxacarb and methoxyfenozide appeared to be harmless or slightly harmful. Implications of this study for adopting IPM tactics with a reduced risk for K. aberrans are discussed.     

From mixed to separate collection of solid waste: Benefits for the town of Zavidovići (Bosnia and Herzegovina)

In Bosnia and Herzegovina only 50% of the municipalities have a well-organized service for (mixed) waste collection and disposal. Illegal dumping is very common, in particular in rural areas, which are not regularly served by any service of collection. This situation leads to serious risks for public health and has dangerous environmental impacts. In Zavidovi?i the municipality is trying to meet high standards in the delivery of services of waste collection, but is constrained by scarce financial and technical resources. Different scenarios for the implementation of a system of separate collection in Zavidovi?i were elaborated in order to provide a useful tool for decision making by comparing costs and environmental & economic benefits of each scenario. Six scenarios were considered, based on different recovery rates for plastic, paper & cardboard, and metals. Benefits resulting from the implementation of each of the proposed scenarios are compared in terms of savings of landfill volume and costs. The study concludes that the adoption of a system of separate collection could generate positive impacts on all the stakeholders involved in the solid waste management sector in Zavidovi?i and could contribute to the compliance of European standards in many Central and Eastern European countries as established by a number of national environmental protection strategies.