Evaluation of natural and anthropogenic influences on the Guadalquivir River (Spain) by dissolved heavy metals and nutrients

To evaluate both the natural and anthropogenic influences on surface waters of Guadalquivir River (SW-Spain), concentrations of dissolved trace metals (Mn, Co, Ni, Cu, Cd, Zn, and Pb), inorganic nutrients (N-NH(4)(+), N-NO(3)(-), N-NO(2)(-), and P-PO(4)(3-)) and other variables as conductivity, pH, dissolved oxygen (DO) and suspended solids (SS) were measured during a three-years period (2001-2003). Samples were taken at 26 stations twice a year, during rain and dry periods. The analysis of variance (ANOVA) suggested that temporal variations within the period of study were statistically negligible. Spatial distributions identified three different zones, mainly influenced by sewage (Eastern Zone), agriculture runoffs (Central Zone), and estuarine processes (Western Zone), respectively. Principal Component and Cluster Analysis allowed to identify the variables controlling the water quality of each zone as: N-NH(4)(+), N-NO(2)(-), Mn, and Co, (Eastern Zone), SS, and P-PO(4)(3-) (Central Zone), and Cd, pH and conductivity (Western Zone). Other variables such as Ni, Cu, Zn or N-NO(3)(-), influenced two different zones, while Pb presented a singular behavior.     

Sources of polycyclic aromatic hydrocarbons (PAHs) in sediments of the Biobio River in south central Chile

Polycyclic aromatic hydrocarbons (PAHs) are ubiquitous in the environment; there are concerns about them due to their toxic properties. Human activities could significantly contribute to the total PAH burden in river sediments. In this work, we document the analysis of PAHs in sediments taken in the middle stretch of the Biobio River in south central Chile. This river is a principal system, draining more than 24,000 km² and subjected to a diverse variety of human-made stressors (pulp mill and urban effluents, agricultural drainage systems, etc). During 2003, several sediment samples were taken in more than 45 sampling sites located in the river’s middle stretch. Due to the granulometric characteristics (mainly sandy sediments), only 17 samples were analyzed, taking into consideration the presence of a fine section within the sediment sample. Using HPLC with fluorescence detection, 15 EPA priority PAHs and perylene were analyzed. The composition of PAHs in the sediment samples is rather similar between sites and levels averaged 104 ± 78 ng g⁻¹ d.w. The highest levels were detected downstream from an industrial discharge. A good correlation was observed between PAH levels and organic carbon content in the tested sediments; however, concentrations above 134 ng g⁻¹ d.w. did not indicate correlation. The samples PAH ratios (Flu/Pyr and Chr/B(a)A) reveal a strong pyrolytic PAH pattern in the sediments tested, supporting evidence indicating that PAHs come mainly from pyrolytic sources. This result contrasts with previous records that have shown a natural influence in the upper basin and a petrogenic pattern near the mouth.     

全球经济一体化给职业安全卫生事业带来新的机遇和挑战

最近我在国际劳工组织与芬兰职业卫生研究所共同出版的亚太地区职业安全卫生新闻通讯上看到此文,想把它介绍给广大读者,跟作者联系,他表示同意,并感到很高兴。Alberto Lopez-Valcarcel先生在文章中指出,一个企业至少应具备三个要素:创新能力、产品质量以及生产能力。同时他提出的下述观点值得得每一位职业安全卫生工作者认真思考:在这个全球一体化的时代、一     

A MATHEMATICAL MODEL OF SALMONID SPAWNING HABITAT1

ABSTRACT: A simulation model [Salmonid Spawning Analysis Model (SSAM)] was developed as a management tool to evaluate the relative impacts of stream sediment load and water temperature on salmonid egg survival. The model is useful for estimating acceptable sediment loads to spawning habitat that may result from upland development, such as logging and agriculture. Software in common use in the USA were adapted for use in gravel bedded rivers and linked to simulate water temperature (the USFWS Instream Water Temperature, SNTEMP model) and water and sediment routing (the USAE Scour and Deposition in Rivers and Reservoirs, HEC-6 model, version 3.2). These models drive the redd (spawning nest) model (the USDA-ABS Sediment Intrusion Dissolved Oxygen SIDO model) which simulates sediment intrusion and dissolved oxygen concentration in the redd environment. The SSAM model predictions of dissolved oxygen and water temperature compared favorably with field data from artificial redds containing hatchery chinook salmon eggs.     

Does the selection of ISO 14001 registrars matter? Registrar reputation and environmental policy statements in China

This study investigates the relationship between characteristics of environmental policy statements and the reputations of ISO 14001 registrars who had performed certification audits of firms operating in mainland China. Three characteristics of environmental policy statements were examined: (1) The conformance of the policy to strict interpretations of the international standard; (2) The policy statement's adherence to the good practice guidelines specified in ISO 14004; and, (3) Self-reported evaluations of the policy statement's effectiveness as implemented. Data from 106 facilities in Beijing, Shanghai and Guangzhou reveal that registrar quality has a relatively weak, positive relationship with conformance to both ISO 14001 standards and to ISO 14004 guidelines, but no relationship was observed with the self-reported data. Additional findings are that the use of foreign registrars is significantly associated with the adoption of ISO 14004 guidelines and that conformance with ISO 14001 standards is somewhat higher for international joint ventures and foreign-owned firms than for state-owned enterprises.     

Fed-batch and batch operating mode analysis of a stirred anaerobic sequencing reactor with self-immobilized biomass treating low-strength wastewater

This work presents an analysis of a stirred anaerobic sequencing discontinuous reactor with different substrate feeding strategies resulting in batch, fed-batch/batch and fed-batch operating modes. The reactor, containing granulated biomass, was fed with approximately 2.0L of synthetic domestic wastewater with Chemical Oxygen Demand of nearly 500 mg/L per cycle and operated at 30 degrees C and 50 rpm. Three feeding strategies with a total cycle time of 6 h, including 30-min settling, were adopted: batch mode with a fill cycle of 6 min, a fed-batch/batch mode with fill cycles of 60, 120 and 240 min and fed-batch mode with a fill cycle of 320 min. The system attained average non-filtered and filtered substrate removal efficiency of 78 and 84%, respectively, for all operating conditions, presenting good stability, solid retention and no granule break-up. A first order kinetic model with a residual organic matter concentration was proposed to analyze the influence of the feeding strategy on the performance during a cycle and bicarbonate alkalinity and total volatile acids concentration profiles were also quantified in order to verify the transient stability behavior.     

Contamination of soil and the medicinal plant <Emphasis Type="Italic">Phyllanthus niruri</Emphasis> Linn. with cadmium in ceramic industrial areas

Phyllanthus niruri is a plant that is used to prevent calcium oxalate crystallisation and to block the stone formation in urolithiasis. Contaminants in the environment can be readily taken up by medicinal plants due to their ability to absorb chemicals into their tissues. If contaminated plants are ingested, they have the potential to negatively affect human and environmental health. The aim of this study was to assess contamination in the soil and the medicinal plant P. niruri by cadmium (Cd) in ceramic industrial areas of Monte Carmelo, Brazil. Soil samples and plant samples (divided in root, shoot and leaves) were collected from a contaminated monitoring site and from a rural area (which was used as a reference site for comparative purposes). The Cd concentrations of the samples were analysed with an atomic absorption spectrometer. P. niruri was found to be sensitive to soil contamination by Cd that was attributed to ceramic industrial emissions. The results revealed that Cd bioaccumulation in the roots and shoots of P. niruri was associated with a significant increase (p?<?0.05) in the concentration of active lignan compounds (phyllanthin and hypophyllanthin) in the leaves. The identification of high concentrations of Cd and active lignan compounds suggests a risk of contamination of the site and the risk of a high dose of Cd to people exposed at the site.     

Invisible floral larcenies: microbial communities degrade floral nectar of bumble bee-pollinated plants

The ecology of nectarivorous microbial communities remains virtually unknown, which precludes elucidating whether these organisms play some role in plant-pollinator mutualisms beyond minor commensalism. We simultaneously assessed microbial abundance and nectar composition at the individual nectary level in flowers of three southern Spanish bumble bee-pollinated plants (Helleborus foetidus, Aquilegia vulgaris, and Aquilegia pyrenaica cazorlensis). Yeasts were frequent and abundant in nectar of all species, and variation in yeast density was correlated with drastic changes in nectar sugar concentration and composition. Yeast communities built up in nectar from early to late floral stages, at which time all nectaries contained yeasts, often at densities between 10(4) and 10(5) cells/mm3. Total sugar concentration and percentage sucrose declined, and percentage fructose increased, with increasing density of yeast cells in nectar. Among-nectary variation in microbial density accounted for 65% (H. foetidus and A. vulgaris) and 35% (A. p. cazorlensis) of intraspecific variance in nectar sugar composition, and 60% (H. foetidus) and 38% (A. vulgaris) of variance in nectar concentration. Our results provide compelling evidence that nectar microbial communities can have detrimental effects on plants and/or pollinators via extensive nectar degradation and also call for a more careful interpretation of nectar traits in the future, if uncontrolled for yeasts.     

Taxing Meat: Taking Responsibility for One’s Contribution to Antibiotic Resistance

Antibiotic use in animal farming is one of the main drivers of antibiotic resistance both in animals and in humans. In this paper we propose that one feasible and fair way to address this problem is to tax animal products obtained with the use of antibiotics. We argue that such tax is supported both by (a) deontological arguments, which are based on the duty individuals have to compensate society for the antibiotic resistance to which they are contributing through consumption of animal products obtained with the use of antibiotics; and (b) a cost-benefit analysis of taxing such animal products and of using revenue from the tax to fund alternatives to use of antibiotics in animal farming. Finally, we argue that such a tax would be fair because individuals who consume animal products obtained with the use of antibiotics can be held morally responsible, i.e. blameworthy, for their contribution to antibiotic resistance, in spite of the fact that each individual contribution is imperceptible.