Biogas from the organic fraction of municipal solid waste: Dealing with contaminants for a solid oxide fuel cell energy generator

The present work investigates electricity production using a high efficiency electrochemical generator that employs as fuel a biogas from the dry anaerobic digestion of the organic fraction of municipal solid waste (OFMSW).The as-produced biogas contains several contaminants (sulfur, halogen, organic silicon and aromatic compounds) that can be harmful for the fuel cell: these were monitored via an innovative mass spectrometry technique that enables for in-line and real-time quantification.A cleaning trap with activated carbons for the removal of sulfur and other VOCs contained in the biogas was also tested and monitored by observing the different breakthrough times of studied contaminants.The electrochemical generator was a commercial Ni anode-supported planar Solid Oxide Fuel Cell (SOFC), tested for more than 300 h with a simulated biogas mixture (CH₄ 60 vol.%, CO₂ 40 vol.%), directly fed to the anode electrode. Air was added to promote the direct internal conversion of CH₄ to H₂ and CO via partial oxidation (POx).The initial breakthrough of H₂S from the cleaning section was also simulated and tested by adding ～1 ppm(v) of sulfur in the anode feed; a full recovery of the fuel cell performance after 24 h of sulfur exposure (～1 ppm(v)) was observed upon its removal, indicating the reliable time of anode exposure to sulfur in case of exhausted guard bed.     

Proactive career behaviors and subjective career success: The moderating role of national culture

Although career proactivity has positive consequences for an individual's career success, studies mostly examine objective measures of success within single countries. This raises important questions about whether proactivity is equally beneficial for different aspects of subjective career success, and the extent to which these benefits extend across cultures. Drawing on Social Information Processing theory, we examined the relationship between proactive career behaviors and two aspects of subjective career success—financial success and work‐life balance—and the moderating role of national culture. We tested our hypotheses using multilevel analyses on a large‐scale sample of 11,892 employees from 22 countries covering nine of GLOBE's 10 cultural clusters. Although we found that proactive career behaviors were positively related to subjective financial success, this relationship was not significant for work‐life balance. Furthermore, career proactivity was relatively more important for subjective financial success in cultures with high in‐group collectivism, high power distance, and low uncertainty avoidance. For work‐life balance, career proactivity was relatively more important in cultures characterized by high in‐group collectivism and humane orientation. Our findings underline the need to treat subjective career success as a multidimensional construct and highlight the complex role of national culture in shaping the outcomes of career proactivity.     

Designs with a priori information for nonmarket valuation with choice experiments: A Monte Carlo study

Good practice in experimental design is essential for choice experiments used in nonmarket valuation. We review the practice of experimental design for choice experiments in environmental economics and we compare it with advances in experimental design. We then evaluate the statistical efficiency of four different designs by means of Monte Carlo experiments. Correct and incorrect specifications are investigated with gradually more precise information on the true parameter values. The data generating process (DGP) is based on estimates from data of a real study. Results indicate that D-efficient designs are promising, especially when based on Bayesian algorithms with informative prior. However, if good quality a priori information is lacking, and if there is strong uncertainty about the real DGP—conditions which are quite common in environmental valuation—then practitioners might be better off with shifted designs built from conventional fractional factorial designs for linear models.     

Development and validation of a method for determination of trace levels of alkylphenols and bisphenol A in atmospheric samples

A method has been developed and validated in order to assess the occurrence of the alkylphenols tert-octylphenol and the isomers of technical nonylphenol as well as bisphenol A in gasphase and aerosol samples of a remote area. Gasphase samples were adsorbed to XAD2 resin, aerosol samples were taken on glass fiber filters. After ultrasonic extraction, clean-up by column chromatography and silylation of the analytes, ten nonylphenol peaks were quantified separately using a GC-MSD-SIM method. The absolute limits of detection and determination are in the range of a few pg per compound, which is a prerequisite for the quantification of the analytes in relatively unpolluted air. The precision of the whole analytical method is in the range of 1-17% and the recoveries range from 57% to 80%. Problems were encountered during method development due to the tendency of the analytes to sorb to glass surfaces. Silanisation of glassware was crucial to achieve acceptable recoveries. The widespread use of the analytes in plastic resins resulted in sample contamination. For this reason a careful choice of sampling material was necessary. Measured concentrations in gasphase samples (lower nanogram per m3 range) and aerosol samples (upper picogram per m3 range) are one to three orders of magnitude below already published concentrations.     

Catalytic NOx reduction with simultaneous dioxin and furan oxidation

The engineering, construction, performance and running costs of a catalytic flue gas cleaning component in the low dust area of a municipal waste incinerator is discussed. For this purpose, the case study of a Flemish incineration plant is presented, covering the history, the design procedure of the catalyst, relevant process data and the financial aspects. A reliable PCDD/F-destruction by means of oxidation by the catalyst to typical values of 0.001 ng TEQ/Nm3 has been demonstrated. At the same time, NOx- and CO-emissions are reduced by 90% and 20% to about 50 mg/Nm3 and below 10 mg/Nm3, respectively.     

The burrowing crab Neohelice granulata as potential bioindicator of heavy metals in estuarine systems of the Atlantic coast of Argentina

This paper presents the concentrations of total copper, lead, cadmium, and zinc in hepatopancreas of the burrowing crab Neohelice granulata from the Samboromb??n Bay (La Plata River estuary) and the Mar Chiquita coastal lagoon, Argentina. The highest accumulation of lead was observed in Mar Chiquita samples, whereas copper, zinc, and cadmium concentrations were higher in those from Samboromb??n Bay. Marked temporal and geographic availability differences were observed, while sexual differences only were observed for zinc. Finally, the validity of using this species as bioindicator of heavy-metal pollution within the assessed estuarine ecosystems is discussed.     

Source Apportionment in the Town of La Spezia (Italy) by Continuous Aerosol Sampling and PIXE Analysis

We describe the results of an aerosol sampling campaign performedin 1999 in the medium-size industrial town of La Spezia, in theNorthwest of Italy. We used two-stage continuous streakersamplers in three different sites and periods of the year. This kind of samplers allows the separation of the PM₁₀ andPM_2.2 fractions of the particulate matter. Moreover, the hourly resolution in the aerosol collection is particularly useful inan urban environment where, typically, many pollution sourceswith fast variations are present. Up to 1700 samples have beenanalysed by Particle Induced X-ray Emission (PIXE) at the INFNaccelerator facility in Florence, obtaining hourly concentrationfor about 20 elements from Na to Pb, with a sensitivity rangingfrom below 1 to about 10 ng m^-3. The total hourly aerosolmass has been estimated with an optical analysis of the samesamples performed (before the PIXE analysis) by an equipment designed and mounted in Genoa. An extensive statistical analysisof the data included standard and Absolute Principal ComponentFactor Analysis (PCFA and APCFA) to deduce the compositionand the weight of the major aerosol sources in both fractions.Thorough different statistical approaches, we generally resolvedcontributions from vehicle emission, fossil fuel combustion,soil-road dust and sea salt aerosol.     

PM<Subscript>10</Subscript> source apportionment in the surroundings of the San Vicente del Raspeig cement plant complex in southeastern Spain

Introduction  

The concentrations of trace metals, ionic species, and carbonaceous components in PM₁₀ (particulate matter with aerodynamic diameters smaller than 10 μm) were measured from samples collected near an industrial complex, primarily composed of cement plants, in southeastern Spain, from September 2005 to August 2006.     

Application of pig slurry to soils. Effect of air stripping treatment on nitrogen and TOC leaching

The effect of physical–chemical slurry treatment on the mobility and transformation of nitrogen and organic matter from pig slurry after soil application is evaluated. Two different pig slurries (one treated by stripping with air at pH = 9 and another non-treated) were applied at the top of a soil column, containing approximately 100 kg of soil. Effluents were monitored measuring concentration values of ammonia, nitrites, nitrates and total organic carbon (TOC). The breakthrough curves were modelled using STANMOD and HYDRUS 1D codes. Low concentrations of ammonia were detected in the effluent recovered at the bottom of the soil profile for both types of slurry. Nitrate concentration in effluent was lower and more homogenous over time when applying stripping treated pig slurry. In N modelling, adsorption of ammonia by soil proved an important process, nitrite and nitrate adsorption being less significant, although not negligible. Transformation from ammonia to nitrite controls the kinetics of the nitrification process. Total organic carbon in the column effluent was higher in the experiment using treated pig slurry, which can be attributed to organic matter solubilisation in the stripping treatment process.