Chitosan for direct bioflocculation of wastewater

Environmental Chemistry Letters - Coagulation/flocculation is a major phenomenon occurring during industrial and municipal water treatment to remove suspended particles. Common coagulants are metal...     

Oceanic variability and coastal topography shape genetic structure in a long-dispersing sea urchin

Understanding the scale of marine population connectivity is critical for the conservation and sustainable management of marine resources. For many marine species adults are benthic and relatively immobile, so patterns of larval dispersal and recruitment provide the key to understanding marine population connectivity. Contrary to previous expectations, recent studies have often detected unexpectedly low dispersal and fine-scale population structure in the sea, leading to a paradigm shift in how marine systems are viewed. Nonetheless, the link between fine-scale marine population structure and the underlying physical and biological processes has not been made. Here we show that patterns of genetic structure and population connectivity in the broadcast-spawning and long-distance dispersing sea urchin Centrostephanus rodgersii are influenced by physical oceanographic and geographic variables. Despite weak genetic differentiation and no isolation-by-distance over thousands of kilometers among samples from eastern Australia and northern New Zealand, fine-scale genetic structure was associated with sea surface temperature (SST) variability and geography along the southeastern Australian coast. The zone of high SST variability is characterized by periodic shedding of eddies from the East Australian Current, and we suggest that ocean current circulation may, through its influence on larval transport and recruitment, interact with the genetic consequences of large variance in individual reproductive success to generate patterns of fine-scale patchy genetic structure. If proven consistent across species, our findings suggest that the optimal scale for fisheries management and reserve design should vary among localities in relation to regional oceanographic variability and coastal geography.     

Laboratory and field comparison of measurements obtained using the available diffusive samplers for ozone and nitrogen dioxide in ambient air

This study presents an evaluation of the extent of differences between measurements performed by O(3) and NO(2) diffusive samplers and by the reference methods for diffusive samplers commercially available. The tests were performed in an exposure chamber under extreme conditions of controlling factors and under field conditions. For NO(2), the results of the laboratory experiments showed that most of the diffusive samplers were affected by extreme exposure conditions. The agreement between the samplers and the reference method was better for the field tests than for the laboratory ones. The estimate of the uptake rate for the exposure conditions using a model equation improved the agreement between the diffusive samplers and the reference methods. The agreement between O(3) measured by the diffusive samplers and by the reference method was satisfactory for 1-week exposure. For 8-hour exposures, the diffusive samplers with high uptake rates quantified better the O(3) concentration than the samplers with low uptake rates. As for NO(2), the results of the O(3) field tests were in better agreement with the reference method than the ones of the laboratory tests. The field tests showed that the majority of diffusive samplers fulfils the 25% uncertainty requirement of the NO(2) European Directive and the 30% uncertainty requirement of the O(3) European Directive for 1-week exposure.     

New evidences in the complexity of contamination of the lagoon of Venice: polybrominated diphenyl ethers (PBDEs) pollution

This study presents the first evaluation of the current pollution by polybrominated diphenyl ethers (PBDEs) of surface sediments from the Lagoon of Venice. We focused the research on tri-to hepta-BDEs, the main components of penta- and octa-mixtures, which are considered to be the most toxic for the biocoenosis. The results pointed out a quite homogeneous contamination of this keystone European transitional environment, with ∑ ₁₃PBDEs values ra nging from 0.39 to 6.78 ng/g dry weight; these values reflect low to moderate pollution levels, which is in conformity to other coastal European ecosystems. The average PBDE profile of the lagoon sediments follows this decreasing trend of congeners: BDE-47>BDE-99> >BDE-190>BDE-28>BDE-153>BDE-154>BDE-138, BDE-183, and BDE-17, which is similar to the worldwide distribution pattern. BDE-47 and BDE-99 revealed a recent use of a penta-BDE mixture, while the presence of hepta-BDEs (BDE-183 and BDE-190) in all of the sites can indicate the actual use of a deca-BDE formulation, because these congeners are considered to be debrominated byproducts of BDE-209 degradation.     

TG, FT-IR and NMR characterization of n-C16H34 contaminated alumina and silica after mechanochemical treatment

This paper deals with the application of mechanochemistry to model systems composed of alumina or silica artificially contaminated with n-C16H34. The mechanochemical treatment was carried out by means of a ring mill for times ranging from 10 to 40h. Thermogravimetry and infrared and nuclear magnetic resonance spectroscopies were used for the characterization of the mechanochemical products. The results have indicated that, in the case of alumina, almost all the contaminant n-C16H34 undergoes a complex oxidative reaction path whose end products are strongly held on the surface. These end products are most likely made of crosslinked, partially oxidized hydrocarbon chains bond to the solid surface via COO(-) groups. In the case of silica, the hydrocarbon undergoes a different, equally complex reaction path, but to a lower extent. In this case the end products are most probably carbonylic compounds and graphitic carbon. Then, for both solid matrices, the mechanochemical treatment promotes significant modification of the chemical nature of the polluting hydrocarbon with end products much more difficult to remove from the surface. As the systems studied are models of sites contaminated by aliphatic hydrocarbon, the results are worthy of consideration in relation to the mobility of the contaminants in the environment.     

Gas-particle concentration and distribution of n-alkanes and polycyclic aromatic hydrocarbons in the atmosphere of Prato (Italy)

Air samples were collected in an urban and industrialised area of Prato (Italy) during 2002, as part of a study to identify and measure aliphatic hydrocarbons and polycyclic aromatic hydrocarbons (PAHs). Total concentrations of aliphatic hydrocarbons ranged between 170 and 282ngm(-3) in the gas phase and from 48.9 to 276ngm(-3) in the particulate phase. The average total PAH concentrations (gas+particulate) were 59.4+/-26.5ngm(-3), and both gas and particulate phase PAH concentrations decreased with increasing temperature. Source identification using diagnostic ratios and principal component analysis identified automobile traffic, in particular, the strong influence of diesel fuel burning, as the major PAH source. Gas-particle partition coefficients (K(p)'s) of n-alkane and PAHs were well correlated with the sub-cooled liquid vapour pressure (P(L)(0)) and indicate stronger sorption of PAHs to aerosol particles compared with n-alkanes.     

Dissipation of 2,4-D in soils of the Humid Pampa region, Argentina: a microcosm study

Phenoxy herbicides like 2,4-dichlorophenoxyacetic acid (2,4-D) are widely used in agricultural practices. Although its half life in soil is 7-14d, the herbicide itself and its first metabolite 2,4-dichlorophenol (2,4-DCP) could remain in the soil for longer periods, as a consequence of its intensive use. Microcosms assays were conducted to study the influence of indigenous microflora and plants (alfalfa) on the dissipation of 2,4-D from soils of the Humid Pampa region, Argentina, with previous history of phenoxy herbicides application. Results showed that 2,4-D was rapidly degraded, and the permanence of 2,4-DCP in soil depended on the presence of plants and soil microorganisms. Regarding soil microbial community, the presence of 2,4-D degrading bacteria was detected even in basal conditions in this soil, possibly due to the adaptation of the microflora to the herbicide. There was an increment of two orders of magnitude in herbicide degraders after 15d from 2,4-D addition, both in planted and unplanted microcosms. Total heterotrophic bacteria numbers were about 1x10(8) CFUg(-1) dry soil and no significant differences were found between different treatments. Overall, the information provided by this work indicates that the soil under study has an important intrinsic degradation capacity, given by a microbial community adapted to the presence of phenoxy herbicides.     

Diagnosis and significance of cystic hygroma in the first trimester

Thirty cases of cervical cystic hygroma were diagnosed in the first trimester of pregnancy. Karyotype analysis was available in 29 (97 per cent). Fifteen (52 per cent) had a chromosomal abnormality. The ultrasound appearance was described as posterior cervical, lateral cervical, or cervical hygroma with hydrops. Of the 14 euploid embryos, six were electively aborted, two are undelivered, and six have been delivered as phenotypically normal infants. In cases in which the chromosomes were normal and the pregnancy continued, all lesions resolved by 18 weeks.     

Slope and pig slurry rate may increase the transfer of chemical elements by surface water runoff

There is a need to evaluate the interference of pig slurry rate and the terrain slope in the chemical elements losses from the soil. This work aimed to quantify water and chemical element losses by surface runoff due to terrain slope and pig slurry rate (PS) in two soils with contrasting textures. Two trials were evaluated in 2018 and 2019 in Cambisol and Nitisol. Rates of 0, 22.5, 45, and 90 m³ ha⁻¹ yr⁻¹ of PS were applied superficially in sites with slopes ranging from 10% to 35%. Perennial forage grass Tifton 85 (Cynodon dactylon) was grown as summer crop and ryegrass (Lolium multiflorum) was sown in the cold seasons in a field environment. Were determined the runoff, the volume of water, and chemical elements (Al, Ca, P, Mg, Cd, Cr, Cu, Mn, Fe, Pb, and Zn) lost by the surface runoff after natural rainfall. Increasing land slope elevated water losses substantially, on average 23.4 times in Cambisol and 10.8 times in Nitisol. This increase resulted in average increases of 27.6 and 12.4 times in the losses of the chemical elements analyzed for Cambisol and Nitisol, respectively. There was a reduction in water losses by surface runoff due to increased PS rates applied in both sites. The increased PS rate affected the losses of Cr and Cu in Cambisol and P, Mg, Cd, and Cu in Nitisol. The clayey soil potentiated the water and chemical elements losses by surface runoff in relation to the soil with lower clay content. Regardless of the soil, water and chemical element losses are maximized at higher slopes.     

Prenatal diagnosis of autosomal dominant polycystic kidney disease using flanking DNA markers and the polymerase chain reaction

A prenatal diagnosis was carried out on a 9-week-old fetus at risk for autosomal dominant polycystic kidney disease (ADPKD). Ten members of the family were previously typed using five DNA markers linked to the PKD1 locus on chromosome 16, and one marker linked to the putative PKD2 locus on chromosome 2. The polymerase chain reaction (PCR) was used to amplify the D16S125 locus. Pairwise and multipoint lod scores indicated that the family was most likely segregating a PKD1 mutation. The fetus inherited the disease haplotype from the affected parent. Diagnostic accuracy was greater than 99 per cent, taking into account the possibility of genetic heterogeneity.