Changes in the quality of chromophoric dissolved organic matter leached from senescent leaf litter during the early decomposition

Chromophoric dissolved organic matter (CDOM) leached from leaf litter is a major source of humus in mineral soil of forest ecosystems. While their functions and refractoriness depend on the physicochemical structure, there is little information on the quality of CDOM, especially for that leached in the very early stages of litter decomposition when a large amount of dissolved organic matter (DOM) is leached. This study aimed to better understand the variations/changes in the composition of CDOM leached from senescent leaf litter from two tree species during the early stage of decomposition. Leaf litter from a conifer tree (Japanese cedar, D. Don) and a deciduous broad-leaved tree (Konara oak, Thunb.) were incubated in columns using simulated rainfall events periodically for a total of 300 d at 20°C. The quality of CDOM was investigated based on the fluorescence properties by using a combination of excitation-emission matrix fluorescence (EEM) and parallel factor analysis (PARAFAC). In addition, the phenolic composition of DOM was investigated at a molecular level by thermally assisted hydrolysis and methylation-gas chromatography-mass spectrometry (THM-GC-MS) in the presence of tetramethylammonium hydroxide (TMAH). The EEM was statistically decomposed into eight fluorescence components (two tannin/peptide-like peaks, one protein-like peak, and five humic-like peaks). A significant contribution of tannin/peptide-like peaks was observed at the beginning of incubation, but these peaks decreased quickly and humic-like peaks increased within 1 mo of incubation. The composition of humic-like peaks was different between tree species and changed over the incubation period. Since tannin-derived phenolic compounds were detected in the DOM collected after 254 d of incubation on THM-GC-MS, it was suggested that tannins partially changed its structure, forming various humic-like peaks during the early decomposition.     

Spatial Distribution Patterns,Sources of Heavy Metals,and Relation to Ecological Risk of Surface Sediments of the Cyprus Northern Shelf (Eastern Mediterranean)

In this study, the spatial distribution of metals and the sources of metal pollution were investigated along the Northern Shelf of Cyprus (Mediterranean Sea). The concentrations of heavy metals and organic matter were measured in sediments collected from the Gemi Konagi, Girne, and Gazi Magusa areas. Measured metal values were compared with Mediterranean background concentrations. Cu and Zn concentrations at the Gemi Konagi area and all of the Cr values were higher than Mediterranean backgrounds. The metal levels were evaluated by the enrichment factor (EF), contamination factor (C_f) and degree of contamination (C_d). EF results indicated that heavy metal sources were probably originated from natural processes and mining activities. The C_f values of Hg indicated low contamination. The C_d (degree of contamination) values for all heavy metals also showed a low degree of contamination at the study area. Metal levels were also compared with the numerical Sediment Quality Guidelines (SQG) for an environmental risk assessment. Results showed that sediments were classified as heavily polluted by Cu and moderately polluted by Zn at Gemi Konagi and heavily polluted by Cr and Ni contamination at all sampling areas per the SQG.     

Effect of carbaryl (carbamate insecticide) on acetylcholinesterase activity of two strains of Daphnia magna (Crustacea,Cladocera)

The present study was designed to investigate the effect of carbaryl (carbamate insecticide) on the acetylcholinesterase activity in two strains (same clone A) of the crustacean cladoceran Daphnia magna. Four carbaryl concentrations (0.4, 0.9, 1.8 and 3.7 µg L^?1) were compared against control AChE activity. Our results showed that after 48 h of carbaryl exposure, all treatments induced a significant decrease of AChE activities whatever the two considered strains. However, different responses were registered in terms of lowest observed effect concentrations (LOEC: 0.4 µg L^?1 for strain 1 and 0.9 µg L^?1 for strains 2) revealing differences in sensitivity among the two tested strains of D. magna. These results suggest that after carbaryl exposure, the AChE activity responses can be also used as a biomarker of susceptibility. Moreover, our results show that strain1 is less sensitive than strain 2 in terms of IC50-48 h of AChE activity. Comparing the EC50-48 h of standard ecotoxicity test and IC50-48 h of AChE inhibition, there is the same order of sensitivity with both strains.     

Composting of wastewater treatment sludge with different bulking agents

The main objectives of this study were to investigate the compostability of wastewater treatment sludge (WTS) containing different bulking agents (BAs) and to determine the most efficient BA. Four different compost trials consisting of mixtures of wheat straw (WS), plane leaf (PL), corncob (CC) and sunflower stalk (SS) with WTS were performed in laboratory reactors. In all experiments, a mixture of 60% WTS and 40% BA (wet basis) was used. The temperature, dry matter (DM), organic matter (OM), pH, electrical conductivity (EC) and C/N ratio were monitored during the composting process. Evaluation of the operational parameters showed that the highest organic matter degradation (i.e. 37.6%), loss of dry matter (i.e. 29.6%) and temperature (i.e. 64 °C) were achieved for the WTS-CC mixtures. Results also showed that the WTS-SS mixture was also successful in terms of these operational parameters. Use of bulking agents for the treatment of wastewater treatment sludge in composting process is an important issue with regards to process efficiency, economy and disposal of agricultural waste. Corncob and sunflower stalk that were previously not used for the composting of WTS from food industry were shown to be highly successful BA materials in this study.

Implications: The compostability of wastewater treatment sludge from the food industry with different bulking agents was studied. Wheat straw, plane leaf, corncob, and sunflower stalk were used as bulking agents. The required microbial stabilization and degree of mineralization were achieved with corncobs and sunflower stalks.     

A new device for formaldehyde and total aldehydes real-time monitoring

A new sensitive technique for the quantification of formaldehyde (HCHO) and total aldehydes has been developed in order to monitor these compounds, which are known to be involved in air quality issues and to have health impacts. Our approach is based on a colorimetric method where aldehydes are initially stripped from the air into a scrubbing solution by means of a turning coil sampler tube and then derivatised with 3-methylbenzothiazolinone-2-hydrazone in acid media (pH?=??0.5). Hence, colourless aldehydes are transformed into blue dyes that are detected by UV–visible spectroscopy at 630 nm. Liquid core waveguide LCW Teflon® AF-2400 tube was used as innovative optical cells providing a HCHO detection limit of 4 pptv for 100 cm optical path with a time resolution of 15 min. This instrument showed good correlation with commonly used techniques for aldehydes analysis such as DNPH derivatisation chromatographic techniques with off-line and on-line samplers, and DOAS techniques (with deviation below 6 %) for both indoor and outdoor conditions. This instrument is associated with simplicity and low cost, which is a prerequisite for indoor monitoring.     

A national reconnaissance for selected organic micropollutants in sediments on French territory

To collect a large data set regarding the occurrence of organic substances in sediment, this study presents the examination of 20 micropollutants, as a national survey. The list of target compounds contains two alkylphenols, three polycyclic aromatic hydrocarbons (PAHs) not commonly included in monitoring programmes, six pesticides or metabolites, five pharmaceutical compounds, two hormones, one UV filter and bisphenol A. The selective and sensitive analytical methods, based on quick, easy, cheap, effective, rugged, and safe (QuEChERS) sample preparation followed by liquid chromatography-tandem mass spectrometry (LC-MS/MS) or gas chromatography-time-of-flight mass spectrometry (GC-ToF-MS), allow the quantification at limits comprised between 0.5 and 23 ng/g, depending on the compound. The paper summarizes the analytical results from 154 sampling points. Of the 20 target compounds, 9 were determined at least once, and the sediments contained a maximum of 7 substances. The most frequently detected were PAHs (frequency, 77 %; max., 1,400 ng/g). The pharmaceutical compounds, hormones and pesticides were rarely detected in the samples; the most frequently detected was carbamazepine (frequency, 6 %; max., 31 ng/g). In some cases, the levels of PAHs and bisphenol A exceed the predicted no-effect concentration (PNEC) values.     

Effect of Poly(Vinyl Acetate) on Mechanical Properties and Characteristics of Poly(Lactic Acid)/Natural Rubber Blends

Natural rubber grafted with poly(vinyl acetate) copolymer (NR-g-PVAc) was synthesized by emulsion polymerization. Three graft copolymers were prepared with different PVAc contents: 1 % (G1), 5 % (G5) and 12 % (G12). Poly(lactic acid) (PLA) was melt blended with natural rubber (NR) and/or NR-g-PVAc in a twin screw extruder. The blends contained 10–20 wt% rubber. The notched Izod impact strength and tensile properties were determined from the compression molded specimens. The effect of NR mastication on the mechanical properties of the PLA/NR/NR-g-PVAc blend was evaluated. Characterization by DMTA and DSC showed an enhancement in miscibility of the PLA/NR-g-PVAc blend. The temperature of the maximum tan δ of the PLA decreased with increasing PVAc content in the graft copolymer, i.e., from 71 °C (pure PLA) to 63 °C (the blend containing 10 % G12). The increase in miscibility brought about a reduction in the rubber particle diameter. These changes were attributed to the enhancement of toughness and ductility of PLA after blending with NR-g-PVAc. Therefore, NR-g-PVAc could be used as a toughening agent of PLA and as a compatibilizer of the PLA/NR blend. NR mastication was an efficient method for increasing the toughness and ductility of the blends which depended on the blend composition and the number of mastications.     

An alternative supercritical fluid extraction system for aqueous matrices and its application in pesticides residue analysis

Abstract

Supercritical fluid extraction (SFE) is a rapid and convenient method for the isolation of organic compounds from environmental samples. This paper describes a supercritical carbon dioxide (CO₂) extraction system that uses a newly designed extraction cell to recover organic compounds from an aqueous matrix. Analysis of the extracts by gas chromatography‐electron capture detector (GC‐ECD) indicated that the herbicide trifluralin (2,6‐dinitro‐N,N‐dipropyl‐4‐trifluoromethylaniline) could be quantitatively extracted by using the SFE system proposed with small amounts of sample. The percentage of recovery obtained with the SFE system described was twice as high as the result obtained using a conventional solid‐phase extraction technique. Extraction by SFE was completed in a short period of time using a simple and low‐cost home‐made system that did not require the use of organic solvents.     

Analytical methods for the determination of alachlor,metolachlor, simazine and atrazine mobility in soils

Abstract

A method for the determination of the mobility of the herbicides, alachlor, metolachlor, simazine and atrazine in soil is described . The method is based on the use of soil thin‐layer chromatography (TLC) and does not require the use of radiolabelled compounds. Soil on the TLC plate after development was separated into various bands, the material in each band was extracted with solvents and analyzed by gas chromatography.