Optimising reverse logistics network to support policy-making in the case of Electrical and Electronic Equipment

Due to the rapid growth of Waste Electrical and Electronic Equipment (WEEE) volumes, as well as the hazardousness of obsolete electr(on)ic goods, this type of waste is now recognised as a priority stream in the developed countries. Policy-making related to the development of the necessary infrastructure and the coordination of all relevant stakeholders is crucial for the efficient management and viability of individually collected waste. This paper presents a decision support tool for policy-makers and regulators to optimise electr(on)ic products’ reverse logistics network. To that effect, a Mixed Integer Linear Programming mathematical model is formulated taking into account existing infrastructure of collection points and recycling facilities. The applicability of the developed model is demonstrated employing a real-world case study for the Region of Central Macedonia, Greece. The paper concludes with presenting relevant obtained managerial insights.     

Method for quantitative assessment of the domino effect in industrial sites

Accidents caused by the domino effect are the most destructive accidents related to industrial sites. The most typical primary incidents for a domino effect sequence are explosions (57%), followed by fires (43%) (Abdolhamidzadeh et al., 2010). These former can generate three escalation vectors (heat load, overpressure, and fragments), and may affect the surrounding equipments and/or facilities. If the affected targets are damaged, they may also explode and generate other threats to other surrounding facilities and so on. These chains of accidents may lead to catastrophic consequences and may affect not only the industrial sites, but also people, environment and economy. This paper presents a methodology for quantitative assessment of domino effects caused by fire and explosion on storage areas. The individual and societal risks are also estimated.     

Depth of manual dismantling analysis: A cost–benefit approach

This paper presents a decision support tool for manufacturers and recyclers towards end-of-life strategies for waste electrical and electronic equipment. A mathematical formulation based on the cost benefit analysis concept is herein analytically described in order to determine the parts and/or components of an obsolete product that should be either non-destructively recovered for reuse or be recycled. The framework optimally determines the depth of disassembly for a given product, taking into account economic considerations. On this basis, it embeds all relevant cost elements to be included in the decision-making process, such as recovered materials and (depreciated) parts/components, labor costs, energy consumption, equipment depreciation, quality control and warehousing. This tool can be part of the strategic decision-making process in order to maximize profitability or minimize end-of-life management costs. A case study to demonstrate the models’ applicability is presented for a typical electronic product in terms of structure and material composition. Taking into account the market values of the pilot product’s components, the manual disassembly is proven profitable with the marginal revenues from recovered reusable materials to be estimated at 2.93–23.06 €, depending on the level of disassembly.     

Renewable energy powered evacuated tube collector refrigerator system

This article presents a numerical study of an Evacuated Tube Collector (ETC) based Ammonia-Water absorption refrigeration system. This system utilizes solar energy as an energy source and does not depend on conventional energy sources for its operation. The present system involves the use of hot water as an energy carrier for generator in an absorption system. The analysis system is based on computational model being developed and the thermodynamic properties of working fluids have been used from the computer code. The variation of performance parameters such as heat load of different components, exergy loss, COP_COOLING, COP_HEATING and Exergy efficiency are studied with varying generator temperature. The results indicate that COP_COOLING as well COP_HEATING lies in the range of 0.012–0.498 and 1.012–1.498 respectively and the values obtained are based on the maximum available solar intensity of 0.9 kW/m² which corresponds to the collector area of about 431.7 m² and hot water in the range of 90 °C. It is concluded that the maximum exergy loss is in generator and it is lowest in condenser. The ETC based absorption refrigeration system can be powered by renewable energy sources and does not employ ozone depleting substances.     

Municipal solid waste management in Lahore City District,Pakistan

This study deals with generation, composition, collection, transportation, and disposal, as well as the present cost of the waste management on the basis of 60% collection of the total waste and the cost of proposed improved system of management on the basis of 100% waste collection using the IWM-2 LCI model. A GIS map of Data Ganj Bakhsh Town (DGBT) of Lahore City District showing communal storage facilities is also provided. DGBT has a population of 1,624,169 living in 232,024 dwellings. The total waste generated per year is 500,000 tons, or 0.84/kg/cap/day. Presently 60% of the MSW is collected and disposed in open dumps, while 40% is not collected and lies along roadsides, streets railway lines, depressions, vacant plots, drains, storm drains and open sewers. In DGBT, 129 containers of 5-m³ capacity, 120 containers of 10-m³ capacity and 380 skips of 2.5-m³ capacity are placed for waste collection. The overall collection and disposal cost of the MSW of DGBT is $3,177,900/yr, which is $10.29/ton. Modeling was conducted using the IWM-2 model for improved collection and disposal on the basis of 100% service, compared to the current 60% service. The modelled cost is $8.3/per ton, which is 20% less than the present cost, but the overall cost of 100% collection and disposal increases to $4,155,737/yr.     

Brainstem auditory evoked responses in young urban and rural boys--a comparison

Brainstem auditory evoked responses (BAER) were studied in a total of 194 boys in the age group between 10-15 yrs taken from a busy metropolitan city and also from a relatively quiet town in order to compare their values and to look into the probable cause of the difference between them, if any. BAER were tested with the help of Compact-4 (Nicolet, USA) instrument using the standard technique. In general, the BAER values of the two sample populations were found to be almost similar with no gross differences in terms of peak latency and inter peak latencies. The values were found to be comparable to adult male values as reported earlier.     

Processing and characterization of a new biodegradable composite made of a PHB/V matrix and regenerated cellulosic fibers

In this study, a biodegradable composite consisting of a degradable continuous cellulosic fiber and a degradable polymer matrix—poly(3-hydroxybutyrate)-co-poly(3-hydroxyvalerate (PHB/V with 19% HV)—was developed. The composite was processed by impregnating the cellulosic fibers on-line withPHB/V powder in a fluidization chamber. The impregnated roving was then filament wound on a plate and hot-pressed. The resulting unidirectional composite plates were mechanically tested and optically characterized by SEM. The fiber content was 9.9 ±0.9 vol% by volumetric determination. The fiber content predicted by the rule of mixture for unidirectional composites was 13.8 ±1.4 vol%. Optical characterization showed that the fiber distribution was homogeneous and a satisfactory wetting of the fibers by the matrix was achieved. Using a blower to remove excess matrix powder during processing increased the fiber content to 26.5 ±3.3 vol % (volumetric) or 30.0 ±0.4 vol% (rule of mixture). The tensile strength of the composite parallel to the fiber direction was 128 ±12 MPa (10 vol% fiber) up to 278 ±48 MPa (26.5 vol% fiber), compared to 20 MPa for the PHB/V matrix. The Young’s modulus was 5.8 ±0.5 GPa (10 vol% fiber) and reached 11.4 ±0.14 GPa (26.5 vol% fiber), versus 1 GPa for the matrix.     

Photometrische Bestimmung der Zytotoxizität von Chemikalien

Two test methods are presented to assess the cytotoxicity of chemicals. On one hand the protozoonTetrahymena pyriformis and on the other the bacteriumPseudomonas aeruginosa is cultured in defined media containing the test chemicals. Test parameter is the quantity of living cells surviving exposure. The conversion of the tetrazolium salt MTT into formazan is equivalent to cell viability. A mixture of detergent and isopropanol is used to dissolve the blue formazan which is not soluble in water, prior to photometric measurement. For cetyltrimethylammonium bromide, benzyldimethyldodecylammonium chloride, dodecylbenzenesulfonic acid sodium salt, potassium dichromate, 4-toluenesulfonic acid sodium salt, and 4-nitrophenol the EC50-values (mol/l) in theTetrahymena pyriformis- (Pseudomonas aeruginosa) test system were: 10^?5,81 (10^?5,08); 10^?4,68) (10^?3,80; 10^?4,50 (10^?4,14); 10^?3,97 (10^?5,11); 10^?2,71 (10^?2,50) and 10^?4,00 (10^?3,64). — With the assays described here it is possible to measure a large number of samples by quick and simple means.     

Retrieval And Monitoring of Atmospheric Trace Gas Concentrations in Nadir and Limb Geometry Using the Space-Borne Sciamachy Instrument

The Scanning Imaging Absorption Spectrometer for Atmospheric Chartography (SCIAMACHY) onboard the European Envisat spacecraft performs continuous spectral observations of reflected, scattered and transmitted sunlight in various observation geometries. A unique feature of SCIAMACHY is the capability of probing the atmosphere in three different observation geometries:The nadir, limb, and occultation measurement modes. In nadir mode, column densities of trace gases are retrieved with a spatial resolution of typically 30× 60 km using the Differential Optical Absorption Spectroscopy (DOAS) technique (Platt and Perner, 1983). Alternating with the nadir measurement, vertical profiles of absorber concentration in the stratosphere are derived in limb and occultation. In this paper we present an overview over some applications of SCIAMACHY data in space-based monitoring of atmospheric pollution. The DOAS algorithms for the retrieval of total column amounts from nadir spectra are briefly described and case studies of pollution events are presented. We also illustrate the technique used to derive stratospheric concentration profiles from limb observations and show comparisons with other remote sensing systems. Special emphasis will be given to techniques, which take advantage of SCIAMACHY's different viewing geometries. In particular, we will discuss the potential and limits of strategies to infer tropospheric abundances of O₃and NO₂.     

Biomass from phytopathogens and culture conditions improve Penicillium chrysogenum antimicrobial activity and antifungal compounds production

The present study evaluated the effect of culture conditions and phytopathogenic strain co-culture on the production of antimicrobial metabolites and antifungal activity of Penicillium chrysogenum R1, which PCR identified. Antimicrobial activity was determined using the Hunter-Hunter experimental design with three factors (pH, incubation temperature, and inoculum, at two levels each). The antifungal metabolites, β 1-3 glucanase and chitinase, produced in the presence of live and inactivated Fusarium oxysporum Fsox C11 biomass, were evaluated using HPLC-MS and GC-MS. Results showed that P. chrysogenum inhibited the growth of five phytopathogenic fungal strains, and the most significant inhibition was observed for F. oxysporum Fsox C11. The best conditions to achieve the highest antifungal activity of the cell-free extract were pH 7, 28°C, 1 × 10⁶ spores/mL, and 144 h of fermentation, observing 86% inhibition of F. oxysporum Fsox C11 growth. Production of antifungal metabolites such as 1,4-benzoquinone imine, viridicatic acid, phenol-5-methyl-2-(1-methyl ethyl), and hydrolytic enzymes β 1-3 glucanase and chitinase was detected. The results define the perspective in designing new processes and products for biocontrol phytopathogens.