Source identification of particulate matter collected at underground subway stations in Seoul,Korea using quantitative single-particle analysis

Subway particle samples collected at four underground subway stations in Seoul, Korea were characterized by a single-particle analytical technique, low-Z particle electron probe X-ray microanalysis. To clearly identify indoor sources of subway particles, four sets of samples collected in tunnels, at platforms, near ticket offices, and outdoors were investigated. For the samples collected in tunnels, Fe-containing particles predominate, with relative abundances of 75–91% for the four stations. The amounts of Fe-containing particles decrease as the distance of sampling locations from the tunnel increases. In addition, samples collected at the platform in subway stations with platform screen doors (PSDs) that limit air-mixing between the platform and the tunnel showed marked decreases in relative abundances of Fe-containing particles, clearly indicating that Fe-containing subway particles are generated in the tunnel. PM₁₀ mass concentration levels are the highest in the tunnels, becoming lower as the distance of sampling locations from the tunnel increases. The extent of the decrease in PM₁₀ in stations with PSDs is also larger than that in stations without PSDs. The results clearly indicate that Fe-containing particles originating in tunnels predominate in the indoor microenvironment of subway stations, resulting in high indoor PM₁₀ levels, and that PSDs play a significant role in reducing Fe-containing particles at platforms and near ticket offices.     

Influence of ship emissions on ozone concentrations around coastal areas during summer season

The influence of ship emissions on ozone (O₃) concentrations in a coastal area (CA) including Busan port, Korea was examined based on a numerical modeling approach during a high O₃ episode. The analysis was performed by two sets of simulation scenarios: (1) with ship emissions (e.g., TOTAL case) and (2) without ship emissions (e.g., BASE case). A process analysis (PA) (the integrated processes rate (IPR) and integrated reaction rate (IRR) analyses) was used to evaluate the relative contributions of individual physical and chemical processes in O₃ production in and around the CA (e.g., sites of Dong Sam (DS) and Dae Yeon (DY)). The model study suggested the possibility that pollutant gases emitted from the ships traversing Busan port can exert a direct impact on the O₃ concentration levels in the CA. Largest impacts of ship emissions on the O₃ concentrations were predicted at the coast (up to 15 ppb) and at inland locations (about 5 ppb) due to both the photochemical production of pollutant gases emitted from the ships and meteorological conditions. From the PA, the photochemical production of O₃ (P(O₃)) due to ship emissions in the CA was found to increase by a mean of 1.5 ppb h^?1 (especially by ≥10 ppb h^?1 at the DS site) during the day.     

Water extraction with CO2 bubbling as pretreatment of melting-furnace fly ash for metal recovery

In Japan, melting-furnace fly ash (MFA) generated from ash melting and gasification/melting plants is considered an “urban mine” due to its high metal content. This study aimed to develop a novel approach to pretreating MFA for metal recovery. Water extraction with CO₂ bubbling was investigated because MFA mainly consists of water-soluble salts containing elements such as Cl, Ca, Na, and K. Instead of acid addition, CO₂ bubbling was applied to maintain the optimal pH for minimizing the release of target metal elements and maximizing the removal of undesirable elements during water extraction. The results revealed that CO₂ bubbling effectively decreased the release of Pb, Zn, and Cd into the treatment water. This was mainly due to coprecipitation with CaCO₃, which was primarily formed by the reaction of Ca²⁺ from the MFA with CO₃ ²⁻ from the CO₂ gas. The bubbling process also helped accelerate the removal of Cl from MFA. Furthermore, the study showed that it is possible to lower the water-to-solid ratio to 5 with only a slight reduction in water extraction effect. Finally, approximately four times the concentration of target metals (rare metals and Cu, Pb, and Zn) was achieved by removing 90% of Cl, 70%–90% of Na and K, and 30%–40% of Ca through water extraction with CO₂ bubbling, resulting in a concentration of target metals that was nearly equal to that of ore.     

Evaluation of Terrestrial and Streamside Salamander Monitoring Techniques at Shenandoah National Park

In response to concerns about amphibian declines, a study evaluating and validating amphibian monitoring techniques was initiated in Shenandoah and Big Bend National Parks in the spring of 1998. We evaluate precision, bias, and efficiency of several sampling methods for terrestrial and streamside salamanders in Shenandoah National Park and assess salamander abundance in relation to environmental variables, notably soil and water pH. Terrestrial salamanders, primarily redback salamanders (Plethodon cinereus), were sampled by searching under cover objects during the day in square plots (10 to 35 m²). We compared population indices (mean daily and total counts) with adjusted population estimates from capture-recapture. Analyses suggested that the proportion of salamanders detected (p) during sampling varied among plots, necessitating the use of adjusted population estimates. However, adjusted population estimates were less precise than population indices, and may not be efficient in relating salamander populations to environmental variables. In future sampling, strategic use of capture-recapture to verify consistency of p's among sites may be a reasonable compromise between the possibility of bias in estimation of population size and deficiencies due to inefficiency associated with the estimation of p. The streamside two-lined salamander (Eurycea bislineata) was surveyed using four methods: leaf litter refugia bags, 1 m² quadrats, 50 × 1 m visual encounter transects, and electric shocking. Comparison of survey methods at nine streams revealed congruent patterns of abundance among sites, suggesting that relative bias among the methods is similar, and that choice of survey method should be based on precision and logistical efficiency. Redback and two-lined salamander abundance were not significantly related to soil or water pH, respectively.     

Comparisons of polybrominated diphenyl ethers levels in paired South Korean cord blood, maternal blood, and breast milk samples

Polybrominated diphenyl ethers (PBDEs), commonly used flame retardants, have been reported as potential endocrine disruptor and neurodevelopmental toxicants, thus giving rise to the public health concern. The goal of this study was to investigate the relationship between umbilical cord blood, maternal blood, and breast milk concentrations of PBDEs in South Korean. We assessed PBDE levels in paired samples of umbilical cord blood, maternal blood, and breast milk. The levels of seven PBDE congeners were measured in 21 paired samples collected from the Cheil Woman’s Hospital (Seoul, Korea) in 2008. We also measured thyroid hormones levels in maternal and cord blood to assess the association between PBDEs exposure and thyroid hormone levels. However, there was no correlation between serum thyroxin (T4) and total PBDEs concentrations. The total PBDEs concentrations in the umbilical cord blood, maternal blood, and breast milk were 10.7 ± 5.1 ng g⁻¹ lipid, 7.7 ± 4.2 ng g⁻¹ lipid, and 3.0 ± 1.8 ng g⁻¹ lipid, respectively. The ranges of total PBDE concentrations observed were 2.28-30.94 ng g⁻¹ lipid in umbilical cord blood, 1.8-17.66 ng g⁻¹ lipid in maternal blood, and 1.08-8.66 ng g⁻¹ lipid in breast milk. BDE-47 (45-73% of total PBDEs) was observed to be present dominantly in all samples, followed by BDE-153. A strong correlation was found for major BDE-congeners between breast milk and cord blood or maternal blood and cord blood samples. The measurement of PBDEs concentrations in maternal blood or breast milk may help to determine the concentration of PBDEs in infant.     

Development and implementation of surface water quality standards for protection of human health in Korea

Current water quality standards for the protection of human health in Korea include 17 substances found in rivers and streams. Due to increasing concern over the release of hazardous chemicals into the aquatic environment, there has been a demand for additional water quality standards. Therefore, the Korean Ministry of the Environment plans to gradually increase the number of water quality standards to 30 substances, including 22 substances for protection of human health and 8 substances for protection of aquatic ecosystems by 2015. In this study, new water quality standards for protection of human health were established for 1,4-dioxane, formaldehyde, and hexachlorobenzene. We selected candidate hazardous chemicals, conducted a human health risk assessment to determine priority chemicals, established water quality standards based on technical analyses and comparison with domestic and developed countries’ water quality standards, and conducted an expert review. Water quality standards for protection of aquatic ecosystems will be derived in the near future. This study describes how the water quality standards for protection of human health were developed and implemented. Current status, recent expansion, and future plans for water quality standards in Korea are also covered.     

Peroxyacetyl nitrate (PAN) in the urban atmosphere

Peroxyacetyl nitrate (PAN) in air has been well known as the indicator of photochemical smog due to its frequent occurrences in Seoul metropolitan area. This study was implemented to assess the distribution characteristics of atmospheric PAN in association with relevant parameters measured concurrently. During a full year period in 2011, PAN was continuously measured at hourly intervals at two monitoring sites, Gwang Jin (GJ) and Gang Seo (GS) in the megacity of Seoul, South Korea. The annual mean concentrations of PAN during the study period were 0.64 ± 0.49 and 0.57 ± 0.46 ppb, respectively. The seasonal trends of PAN generally exhibited dual peaks in both early spring and fall, regardless of sites. Their diurnal trends were fairly comparable to each other. There was a slight time lag (e.g., 1 h) in the peak occurrence pattern between O₃ and PAN, as the latter trended to peak after the maximum UV irradiance period (16:00 (GJ) and 17:00 (GS)). The concentrations of PAN generally exhibited strong correlations with particulates. The results of this study suggest that PAN concentrations were affected sensitively by atmospheric stability, the wet deposition of NO₂, wind direction, and other factors.     

Influence of soil conditions on dissolved organic matter leached from forest and wetland soils: a controlled growth chamber study

This study investigated the effects of various soil conditions, including drying-rewetting, nitrogen deposition, and temperature rise, on the quantities and the composition of dissolved organic matter leached from forest and wetland soils. A set of forest and wetland soils with and without the nitrogen deposition were incubated in the growth chambers under three different temperatures. The moisture contents were kept constant, except for two-week drying intervals. Comparisons between the original and the treated samples revealed that drying-rewetting was a crucial environmental factor driving changes in the amount of dissolved organic carbon (DOC). The DOC was also notably increased by the nitrogen deposition to the dry forest soil and was affected by the temperature of the dry wetland soil. A parallel factor (PARAFAC) analysis identified three sub-fractions of the fluorescent dissolved organic matter (FDOM) from the fluorescence excitation–emission matrices (EEMs), and their compositions depended on drying-rewetting. The data as a whole, including the DOC and PARAFAC components and other optical indices, were possibly explained by the two main variables, which were closely related with the PARAFAC components and DOC based on principal component analysis (PCA). Our results suggested that the DOC and PARAFAC component information could provide a comprehensive interpretation of the changes in the soil-leached DOM in response to the different environmental conditions.     

Removal ratio of gaseous toluene and xylene transported from air to root zone via the stem by indoor plants

This work was designed to investigate the removal efficiency as well as the ratios of toluene and xylene transported from air to root zone via the stem and by direct diffusion from the air into the medium. Indoor plants (Schefflera actinophylla and Ficus benghalensis) were placed in a sealed test chamber. Shoot or root zone were sealed with a Teflon bag, and gaseous toluene and xylene were exposed. Removal efficiency of toluene and total xylene (m, p, o) was 13.3 and 7.0 μg·m^?3·m^?2 leaf area over a 24-h period in S. actinophylla, and was 13.0 and 7.3 μg·m^?3·m^?2 leaf area in F. benghalensis. Gaseous toluene and xylene in a chamber were absorbed through leaf and transported via the stem, and finally reached to root zone, and also transported by direct diffusion from the air into the medium. Toluene and xylene transported via the stem was decreased with time after exposure. Xylene transported via the stem was higher than that by direct diffusion from the air into the medium over a 24-h period. The ratios of toluene transported via the stem versus direct diffusion from the air into the medium were 46.3 and 53.7 % in S. actinophylla, and 46.9 and 53.1 % in F. benghalensis, for an average of 47 and 53 % for both species. The ratios of m,p-xylene transported over 3 to 9 h via the stem versus direct diffusion from the air into the medium was 58.5 and 41.5 % in S. actinophylla, and 60.7 and 39.3 % in F. benghalensis, for an average of 60 and 40 % for both species, whereas the ratios of o-xylene transported via the stem versus direct diffusion from the air into the medium were 61 and 39 %. Both S. actinophylla and F. benghalensis removed toluene and xylene from the air. The ratios of toluene and xylene transported from air to root zone via the stem were 47 and 60 %, respectively. This result suggests that root zone is a significant contributor to gaseous toluene and xylene removal, and transported via the stem plays an important role in this process.     

Observed chemical characteristics of long-range transported particles at a marine background site in Korea

Deokjeok Island is located off the west coast of the Korean Peninsula and is a suitable place to monitor the long-range transport of air pollutants from the Asian continent. In addition to pollutants, Asian dust particles are also transported to the island during long-range transport events. Episodic transport of dust and secondary particles was observed during intensive measurements in the spring (March 31-April 11) and fall (October 13-26) of 2009. In this study, the chemical characteristics of long-range-transported particles were investigated based on highly time-resolved ionic measurements with a particle-into-liquid system coupled with an online ion chromatograph (PILS-IC) that simultaneously measures concentrations of cations (Li+, Na , NH4+, K+, Ca2+, Mg2+) and anions (F-, C1-, NO3-, SO42-). The aerosol optical thickness (AOT) distribution retrieved by the modified Bremen Aerosol Retrieval (M-BAER) algorithm from moderate resolution imaging spectroradiometer (MODIS) satellite data confirmed the presence of a thick aerosol plume coming from the Asian continent towards the Korean peninsula. Seven distinctive events involving the long-range transport (LRT) of aerosols were identified and studied, the chemical components of which were strongly related to sector sources. Enrichment of acidic secondary aerosols on mineral dust particles, and even of sea-salt components, during transport was observed in this study. Backward trajectory, chemical analyses, and satellite aerosol retrievals identified two distinct events: a distinctively high [Ca2++Mg2]/[Na+] ratio (>2.0), which was indicative of a preprocessed mineral dust transport event, and a low [Ca2++Mg2+]/[Na+] ratio (<2.0), which was indicative of severe aging of sea-salt components on the processed dust particles. Particulate C1- was depleted by up to 85% in spring and 50% in the fall. A consistent fraction of carbonate replacement (FCR) averaged 0.53 in spring and 0.55 in the fall. Supporting evidences of C1- enrichment on the marine boundary layer prior to a dust front were also found. Supplemental materials are available for this article. Go to the publisher's online edition of the Journal of the Air & Waste Management Association for sector and air mass classifications of clean and LRT cases.