Precursors and potential sources of ground-level ozone in suburban Shanghai

• Air masses from Zhejiang Province is the major source of O₃ in suburban Shanghai. • O₃ formation was in VOC-sensitive regime in rural Shanghai. • O₃ formation was most sensitive to propylene in rural Shanghai. A high level of ozone (O₃) is frequently observed in the suburbs of Shanghai, the reason for this high level remains unclear. To obtain a detailed insight on the high level of O₃ during summer in Shanghai, O₃ and its precursors were measured at a suburban site in Shanghai from July 1, 2016 to July 31, 2016. Using the Hybrid Single-Particle Lagrangian Integrated Trajectory (HYSPLIT) model and concentration weighted trajectories (CWT), we found that Zhejiang province was the main potential source of O₃ in suburban Shanghai. When the sampling site was controlled by south-western winds exceeding 2 m/s, the O₃-rich air masses from upwind regions (such as Zhejiang province) could be transported to the suburban Shanghai. The propylene-equivalent concentration (PEC) and ozone formation potential (OFP) were further calculated for each VOC species, and the results suggested that propylene, (m+p)-xylene, and toluene played dominant roles in O₃ formation. The Ozone Isopleth Plotting Research (OZIPR) model was used to reveal the impact of O₃ precursors on O₃ formation, and 4 base-cases were selected to adjust the model simulation. An average disparity of 18.20% was achieved between the simulated and observed O₃ concentrations. The O₃ isopleth diagram illustrated that O₃ formation in July 2016 was in VOC-sensitive regime, although the VOC/NO_x ratio was greater than 20. By introducing sensitivity (S), a sensitivity analysis was performed for O₃ formation. We found that O₃ formation was sensitive to propylene, (m+p)-xylene, o-xylene and toluene. The results provide theoretical support for O₃ pollution treatment in Shanghai.     

Modeling the competitive effect of phosphate, sulfate, silicate, and tungstate anions on the adsorption of molybdate onto goethite

The mobility of Mo in soils and sediments depends on several factors including soil mineralogy and the presence of other oxyanions that compete with Mo for the adsorbent's retention sites. Batch experiments addressing Mo adsorption onto goethite were conducted with phosphate, sulfate, silicate, and tungstate as competing anions in order to produce competitive two anions adsorption envelopes, as well as competitive two anions adsorption isotherms. Tungstate and phosphate appear to be the strongest competitors of Mo for the adsorption sites of goethite, whereas little competitive effects were observed in the case of silicate and sulfate. Mo adsorption isotherm from a phosphate solution was similar to the one from a tungstate solution. The charge distribution multi-site complexation (CD-MUSIC) model was used to predict competitive adsorption between MoO(4)(2-) and other anions (i.e., phosphate, sulfate, silicate and tungstate) using model parameters obtained from the fitting of single ion adsorption envelopes. CD-MUSIC results strongly agree with the experimental adsorption envelopes of molybdate over the pH range from 3.5 to 10. Furthermore, CD-MUSIC prediction of the molybdate adsorption isotherm show a satisfactory fit of the experimental results. Modeling results suggest that the diprotonated monodentate complexes, FeOW(OH)(5)(-0.5) and FeOMo(OH)(5)(-0.5), were respectively the dominant complexes of adsorbed W and Mo on goethite 110 faces at low pH. The model suggests that Mo and W are retained mainly by the formation of monodentate complexes on the goethite surface. Our results indicate that surface complexation modeling may have applications in predicting competitive adsorption in more complex systems containing multiple competing ions.     

Organochlorine pesticides in soil profiles from Tianjin, China

Soil cores were collected from soils at five sites in Tianjin area for the determination of hexachlorocyclohexane isomers (HCHs, including alpha-HCH, beta-HCH, gamma-HCH and delta-HCH), dichlorodiphenyltrichloroethane and metabolites (DDXs, including p,p'-DDT, p,p'-DDE and p,p'-DDD) and total organic carbon (TOC). The levels and vertical distributions of HCHs and DDXs are studied. Results show that the application of pesticides in the past years was the major contributor of HCHs and DDXs accumulation in the sampling areas. Significant positive correlations were seen between the residual and application amounts of HCHs and DDXs. Wastewater irrigation did not bring a significant contribution of HCHs or DDXs into the soils. HCHs and DDXs concentrations peak at the surface and decline in soil profile with depth, while fluctuations were observed in the plow layers of some cultivated soils caused by frequent cultivation activities and batch irrigation. Positive correlations were observed between the contents of TOC and HCHs and DDTs. Although the amounts of HCHs application in all sampling sites are larger than DDXs, at surface and near surface layers of most sampling sites, the concentrations of summation operatorHCHs are lower than summation operatorDDXs. The composition of DDXs in the applied pesticides and sampled soils indicates that there is no recent DDT input at the sample areas.     

Methods for the preparation of a biodesulfurization biocatalyst using Rhodococcus sp

Several methods to prepare a biodesulfurization (BDS) biocatalyst were investigated in this study using a strain of Rhodococcus sp. 1awq. This bacterium could selectively remove sulfur from dibenzothiophene (DBT) via the "4S" pathway. DBT, dimethylsulfoxide (DMSO), sodium sulphate and mixed sulfur sources were used to study their influence on cell density, desulfurization activity, desulfurization ability, and the cost of biocatalyst production. In contrast to that observed from bacteria cultured in DBT, only partial desulfurization activity of strain 1awq was induced by DBT after cultivation in a medium containing inorganic sulfur as the sole sulfur source. The biocatalyst, prepared from culture with mixed sulfur sources, was found to possess desulfurization activity. With DMSO as the sole sulfur source, the desulfurization activity was shown to be similar to that of bacteria incubated in medium with DBT as the sole sulfur source. The biocatalyst prepared by this method with the least cost could remove sulfur from hydrodesulfurization (HDS)-treated diesel oil efficiently, providing a total desulfurization percent of 78% and suggesting its cost-effective advantage.     

利用粉煤灰中活性炭的吸附能力治理含铬废水

通过实验研究指出，运用粉煤灰可同时治理含铬废水中Cr(Ⅲ)和Cr(Ⅵ)。结果表明，粉煤灰用量、废液酸度、振荡时间和温度等均对铬的去除效果存在一定影响。研究揭示，在常温(15～35℃)下，当粉煤灰的掺人比例为1：650、含铬废液pH为4．0～5．5、接触时间为40min时，粉煤灰可同时治理含铬废水中Cr(Ⅲ)和Cr(Ⅵ)，其中Cr(Ⅵ)的去除率在88％左右，Cr(Ⅲ)的去除率可达99％以上。该方法工艺简单，成本低廉，效果优良，具有较好的应用前景。     

钛白副产硫酸亚铁的综合利用研究

以钛白副产硫酸亚铁、氯化钾和氨水为原料，采用硫酸钾铵法制取硫酸钾。实验结果表明，该工艺生产的产品，其质量达到ZBG-21006-89国家标准，且此工艺流程简单、操作方便、条件易控制，无二次污染。     

水葱修复土壤镉污染潜力的研究

野外观察与研究发现水葱(Scirpus tabernaemontani G.)可以耐受土壤中高浓度的重金属污染,并对镉(Cd)有很高的生物富集量.实验室水培试验研究了两个主要因素,营养液pH与Cd含量,对水葱生物量以及Cd富集效果的影响.结果表明,它可耐受高浓度Cd (30 mg/L)和大范围pH变化 (3.7～7.7).当营养液pH为4.7, Cd为25 mg/L时,水葱富集的Cd达到最大值:地上部分264.71 mg/kg,地下部分234.39 mg/kg,平均转运系数1.13.这显示了它用于植物修复Cd污染土壤的潜力.     

铅与苄嘧磺隆复合污染对青紫泥微生物生物量的影响

通过实验室培养试验研究了铅(0、100、300、500、800 mg/kg)与苄嘧磺隆(0、5、10 mg/kg)单独及其复合污染对青紫泥田水稻土壤微生物生物量的影响.结果表明,两种污染物在整个培养过程中都对微生物生物量C、N产生了显著的抑制作用,其交互作用在各个取样时期也均达到了显著水平;在整个培养过程中微生物生物量C、N的含量表现出先降低后升高的变化趋势,在第7～14天下降到最低点;而对微生物生物量C/N比的影响则表现出先升高后下降的趋势.     

生活垃圾填埋场封场后种植植物中重金属迁移研究

在上海老港生活垃圾填埋场填埋单元封场的覆盖土中掺混了矿化垃圾种植植物,分析Cd、Pb、Cu、Zn 4种重金属在土壤和植物中的迁移变化,研究表明:(1)覆盖土土质从一般耕作土变成肥沃土壤;覆盖土和种植混合土重金属Cd、Pb、Cu、Zn中Cd、Pb含量相近,但种植土的Cu含量略大于覆盖原土,Zn含量远大于覆盖原土;(2)植物能富集土壤和垃圾中的重金属,木本植物的根部富集重金属的能力强于草本植物,但重金属在草本植物根、茎、叶中的迁移速度大于木本植物;(3)植物根、茎、叶的Cu、Zn含量均远大于未受污染土壤种植植物相应部位的Cu、Zn含量,种植的植物不能供家养动物食用,以免通过食物链作用危及人体安全.     

UniTank工艺流程氨氮浓度的动态特征

利用基于ASM2D的数学模型对上海石洞口污水厂UniTank工艺内氨氮浓度的动态特性进行了仿真研究,发现该流程反应器氨氮浓度具有非稳态特征.反应器内氨氮浓度的变化规律与曝气时间设定及进水时间设定有关.增加曝气强度,能降低边池及中池的氨氮浓度,相应增大边池及中池的硝态氮浓度.