Multi-process and multi-pollutant control technology for ultra-low emissions in the iron and steel industry

The iron and steel industry is not only an important foundation of the national economy, but also the largest source of industrial air pollution. Due to the current status of emissions in the iron and steel industry, ultra-low pollutant emission control technology has been researched and developed. Liquid-phase proportion control technology has been developed for magnesian fluxed pellets, and a blast furnace smelting demonstration project has been established to use a high proportion of fluxed pellets (80%) for the first time in China to realize source emission reduction of SO₂ and NO_x. Based on the characteristics of high NO_x concentrations and the coexistence of multiple pollutants in coke oven flue gas, low-NO_x combustion coupled with multi-pollutant cooperative control technology with activated carbon was developed to achieve efficient removal of multiple pollutants and resource utilization of sulfur. Based on the characteristics of co-existing multiple pollutants in pellet flue gas, selective non-catalytic reduction (SNCR) coupled with ozone oxidation and spray drying adsorption (SDA) was developed, which significantly reduces the operating cost of the system. In the light of the high humidity and high alkalinity in flue gas, filter materials with high humidity resistance and corrosion resistance were manufactured, and an integrated pre-charged bag dust collector device was developed, which realized ultra-low emission of fine particles and reduced filtration resistance and energy consumption in the system. Through source emission reduction, process control and end-treatment technologies, five demonstration projects were built, providing a full set of technical solutions for ultra-low emissions of dust, SO₂, NO_x, SO₃, mercury and other pollutants, and offering technical support for the green development of the iron and steel industry.     

Progress in quantitative research on the relationship between atmospheric oxidation and air quality

Atmospheric oxidizing capacity (AOC) is an essential driving force of troposphere chemistry and self-cleaning, but the definition of AOC and its quantitative representation remain uncertain. Driven by national demand for air pollution control in recent years, Chinese scholars have carried out studies on theories of atmospheric chemistry and have made considerable progress in AOC research. This paper will give a brief review of these developments. First, AOC indexes were established that represent apparent atmospheric oxidizing ability (AOIe) and potential atmospheric oxidizing ability (AOIp) based on aspects of macrothermodynamics and microdynamics, respectively. A closed study refined the quantitative contributions of heterogeneous chemistry to AOC in Beijing, and these AOC methods were further applied in Beijing-Tianjin-Hebei and key areas across the country. In addition, the detection of ground or vertical profiles for atmospheric OH·, HO₂·, NO₃· radicals and reservoir molecules can now be obtained with domestic instruments in diverse environments. Moreover, laboratory smoke chamber simulations revealed heterogeneous processes involving reactions of O₃ and NO₂, which are typical oxidants in the surface/interface atmosphere, and the evolutionary and budgetary implications of atmospheric oxidants reacting under multispecies, multiphase and multi-interface conditions were obtained. Finally, based on the GRAPES-CUACE adjoint model improved by Chinese scholars, simulations of key substances affecting atmospheric oxidation and secondary organic and inorganic aerosol formation have been optimized. Normalized numerical simulations of AOIe and AOIp were performed, and regional coordination of AOC was adjusted. An optimized plan for controlling O₃ and PM_2.5 was analyzed by scenario simulation.     

压电复合阻尼减振材料和压电复合吸声降噪材料中压电陶瓷应用形态研究

我们曾经将压电陶瓷粉体复合到传统的吸声降噪材料与阻尼减振材料中 ,制作出了性能更好的新型吸声降噪材料和新型阻尼减振材料 ;而且还发现废品压电陶瓷的粉体与正品压电陶瓷的粉体具有相同的功效[1～4 ] ,分析了它们同样发挥压电效应的原因。     

环境质量评价中的赋权技术

介绍了环境质量评价权重的定义，作用及因子赋权的原则，详细阐述了目前常用的１６种赋权方法的原理，步骤及优缺点，并对环境质量主平价中有关赋权听几个问题进行了讨论。     

吸附树脂对苯甲酸的吸附动力学研究

对比超高交联吸附树脂NJ 8与AmberliteXAD 4对苯甲酸的静态吸附动力学性质 ,并深入讨论温度和起始浓度对平衡时间和吸附速率的影响。NJ 8和XAD 4两种树脂在吸附苯甲酸的过程中 ,膜扩散和颗粒内扩散均为主控步骤 ,但是前者颗粒内扩散占据优势 ,而后者膜扩散占据优势     

砖瓦厂氟化物排放研究

砖瓦厂是重要的大气污染源。通过模拟试验和现场测定，研究了制砖中氟的释放与温度的关系，成品砖内氟的残留分布和砖瓦厂氟的无组织排放等，在此基础上提出了砖瓦厂生产中氟的释放率为５４．３％。这些结果对防治砖恒心各氟的污染有参考意义。     

水库泄洪闸下溪流深潭氮磷营养盐滞留特征及动力学模拟

为解析水库泄洪闸下溪流深潭氮磷营养盐滞留特征,选择NaBr为保守示踪剂,分别以NH₄Cl和KH₂PO₄为添加营养盐,在合肥板桥河源头溪流开展野外示踪实验,据此估算氨氮（NH₄⁺）、磷酸盐（PO₄^3-）营养螺旋指标,识别主流区和暂态存储区NH₄⁺、PO₄^3-滞留贡献水平,模拟深潭地貌的氮磷吸收动力学特征.结果表明,深潭具有较好的氮磷滞留潜力,且对PO₄^3-的滞留潜力超过NH₄⁺;暂态存储区对NH₄⁺的滞留贡献率平均为91.49%,表明NH₄⁺滞留主要发生在暂态存储区;主流区对PO₄^3-的滞留贡献率平均为96.09%,意味着主流区是PO₄^3-滞留的主要场所;Michaelis-Menten（M-M）方程可以较好的模拟深潭氮磷滞留动力学效应,模拟得到的最大吸收速率U_max-NH₄、U_max-PO₄均值分别为0.48、0.08 mg·m^-2·s^-1,半饱和常数K_m-NH₄、K_m-PO₄均值分别为0.26、0.19 mg·L^-1.     

超低排放下燃煤电厂氨排放特征

燃煤电厂采用SCR(选择性催化还原)脱硝过程消耗大量的氨,同时存在氨逃逸和氨排放问题.为了掌握超低排放燃煤机组的氨排放程度、脱硝氨逃逸情况以及各环保设施对氨的协同脱除能力,为燃煤电厂氨减排政策制定和氨减排技术研发提供支持.在京津冀大气污染传输通道城市中选取11个城市中的14台机组,采用例如DL/T 260—2012《燃煤电厂烟含脱硝装置性能验收试验规范》的标准方法用稀硫酸吸收烟气中的氨再结合分光光度测试方法,对环保设施多个位置的烟气中氨进行浓度测试.结果表明:①氨排放浓度介于0.05~3.27 mg/m3之间,平均约0.95 mg/m3,通过烟气排入大气中氨的浓度不高;②测试的14台机组中有7台机组(约50%)脱硝氨逃逸值高于设计值(2.28 mg/m3),说明脱硝氨逃逸超过设计值呈普遍现象,个别电厂脱硝氨逃逸严重,氨逃逸亟待解决;③环保设施对逃逸氨具有较好的协同脱除能力,平均脱除率约为64.86%.建议对于SCR脱硝氨逃逸严重的机组,对SCR出口烟道截面氮氧化物(NO_x)实施网格式测试,在此基础上实施精细化精准喷氨、优化流场、提高SCR脱硝运行水平(或采用专业化运维),从源头上减少氨耗量,降低系统能耗和氨排放.      

污泥中重金属的形态及在小麦幼苗中的富集

采用BCR连续提取法研究了污泥中Cd、Pb和Zn的化学形态分布,并通过室内土培实验研究了其在小麦幼苗中的富集效应。研究结果表明,Pb和Cd在污泥中主要以残渣态存在,相对比较稳定;Zn则主要以可交换态和可还原态存在,具有较强的潜在生物有效性。污泥中3种金属的潜在生物有效性由强到弱的顺序为:Zn>Cd>Pb。比较污泥中的Zn、Pb、Cd在小麦根和叶中的富集系数(EC),可发现3种金属在根中的富集系数均大于其在叶中的富集系数,说明小麦根部对这3种金属的富集能力大于其茎叶部分。3种金属在小麦中富集能力的强弱顺序在茎叶中为Zn>Cd>Pb,此结果与金属形态分析的结果相吻合。     

胶州湾及邻近海域表层海水中一氧化氮浓度分布及其影响因素探讨

2011年2～3月利用化学发光法对胶州湾及邻近海域表层海水中一氧化氮(NO)浓度进行了监测.结合水文、化学和生物等要素的同步观测资料,对该海域NO浓度分布及其影响因素进行了探讨.结果表明,胶州湾内表层海水中NO浓度为0.080～0.493 nmol.L-1,平均值为(0.292±0.146)nmol.L-1,胶州湾外NO浓度为未检出～0.435 nmol.L-1,平均值为(0.160±0.130)nmol.L-1.总体来说,胶州湾表层海水中NO浓度呈现出自湾内向湾外递降的分布趋势,陆地径流和人为活动可能对NO浓度的分布造成一定程度的影响.胶州湾及邻近海域表层海水中NO浓度比开阔大洋高1个数量级.周日变化研究表明,NO浓度具有一定的变化特征,最大值出现在15:00,这可能主要受光照的影响.影响NO浓度分布的因素比较复杂,可能主要受亚硝酸盐、光强和pH等因素的影响.结果表明,2011年春季胶州湾及邻近海域表层海水是大气NO的源,通量约为1.09×10-15 mol.(cm2.s)-1.