环境保护与科学发展

环境保护是实现科学发展的基础和保障。本文阐述了环境保护与科学发展的关系,分析了中国、尤其是黑龙江省环境资源状况。环境保护已成为中国经济社会发展的重要制约因素。从转变思想观念、完善环境经济政策和技术政策、改善环境保护的法制环境、解决突出环境保护问题等方面,提出了环境保护要保障经济社会发展全局,经济社会发展也要充分考量环境保护的具体措施。     

兰州冬季城市烟雾层辐射效应的观测分析研究

冬季兰州城市上空形成浓厚的烟雾层。利用1990年11月兰州大学和离城市地面625m高南山顶的辐射和探空资料,分析和计算了烟雾层的辐射效应。兰州城市烟雾层具有浑浊度系数大波长指数小的特点。对到达地面的太阳辐射有很强的削弱。浑浊度系数最大时,烟雾层内的平均加热率为6.16℃/d,。大气层对各波段的消光强弱不同,对可见光削减最大。同时烟雾层使到达兰州地面的大气逆辐射比南山顶增加5.2％,总的入射辐射比南山顶小5.6％,地面辐射差额比南山顶小67.8％。烟雾层的存在增加了城市边界层的稳定性。     

化学吸收法回收工业废气中CO的研究

通过实验优选出一种ＣｕＣｌ－ＭｇＣｌ２水溶系统高选择性ＣＯ吸收剂,确定了吸收剂对ＣＯ的最大吸收量与温度的关系,探讨了气体组成变化对ＣＯ回收率的影响,由实验数据求出吸收过程中ＣＯ的回收率为９３％。采用气相色谱分析法测出产物ＣＯ的纯度为９８％,给出吸收液的解吸温度范围为１２０－１４０℃。初步探讨了ＣｕＣｌ－ＭｇＣｌ２水溶系吸收剂对ＣＯ的吸收反应机理,为转炉烟气等工业废气中ＣＯ的分离回收提供了新途径。     

用边际费用分析方法研究制定排污收费的新标准

排污收费的有效性主要取决于它的经济刺激作用。本文分析了排污收费的经济学原理,提出了制定排污收费标准更为合理有效的方法──边际费用分析法,定量地描述和分析了排污收费与其经济刺激作用的关系,以天津纪庄子污水处理厂为例,提出应建立的排污收费标准。本文指出,有效地运用排污收费来管理污水的排放,必须实行区域总量控制,制定具有有效的经济刺激作用的排污收费标准。     

中国地区氧化亚氮排放量及其变化的估算

对我国大气中氧化亚氮的排放源及其大小进行了分析和计算,中国地区氧化亚氮的年排放置为950G_9N_2O-N,约占全球总排放量的6％.天然源和人为源各占我国氧化亚氮排放量的71％和29％.在天然源中以海洋排放为主,人为源中则以煤炭燃烧释放的贡献最大.计算显示今后几年内氧化亚氮排放的年增加量是6G_9N_2O-N.     

660MW锅炉燃烧优化调整试验研究

针对某电厂1号锅炉燃烧器改造后锅炉结焦、飞灰及炉渣可燃物含量高、锅炉效率低等问题,在对锅炉结焦原因深入分析的基础.上,进行了燃烧优化调整试验。通过采取降低一次风压、降低煤粉细度等措施,炉内结焦得到了有效控制,飞灰、炉渣可燃物含量从10.37%、4.75%降低至2.99%、0.91%。结果表明:优化调整试验效果明显,煤粉细度、一次风速均可控在合适范围之内,锅炉效率显著提高,有效防止了炉内结焦现象的发生,提高了锅炉运行的安全性和经济性。     

Experimental study on agitated drying characteristics of sewage sludge under the effects of different additive age

Drying experiments of dewatered sewage sludge (DSS) were conducted on a agitated paddle dryer, and the effects of additive agents, i.e., CaO, pulverized coal (PC), heavy oil (HO), and dried sludge ("DS" through back mixing) on the agitated drying characteristics of DSS were investigated. The results indicated that CaO can significantly increase the drying rate of DSS. The drying rate at CaO/DSS (mass ratio) = 1/100 was 135% higher than that of CaO/DSS = 0. Pulverized coal has no obvious effect on drying rate, but the increase of PC/DSS can promote breaking up of sludge lump. Heavy oil was found to be slightly effective in improving the drying rate of DSS in the examined experimental range of HO/DSS = 0-1/20. It is also found thatHOcan reduce the torque of the dryer shaft, due to its lubrication effect. Back mixing of DS was found to be effective in alleviating the unfavorable effect of the lumpy phase by improving the mixing effect of the paddle dryer. There was a marked increase of drying rate with an increase of the DS/DSS in the experimental range of DS/DSS = 0-1/3.     

基于固液分离预处理的餐厨垃圾厌氧发酵

研究不同预处理方法所获餐厨垃圾浆料的半连续式厌氧发酵效果,评价该类餐厨垃圾的产甲烷资源化潜能.结果表明,固液油三相分离预处理后的液相餐厨垃圾作为进料较固液混合相餐厨垃圾在厌氧发酵时具有更高的VS去除率,实际产甲烷潜能和甲烷转化率,分别为91.2％,531.5mLCH4/gVS和54.3％,表明液相餐厨垃圾半连续中温湿式...     

Kinetics of aniline oxidation with chlorine dioxide

For the first time, kinetics of aniline oxidation with chlorine dioxide(ClO2) were investigated systematically by detecting concentration of aniline with HPLC at regular intervals. Results showed that the reaction was first-order both in ClO2 and in aniline, and the oxidation reaction could be described as second-order reaction. Stoichiometric factor η was experimentally determined to be 2.44. The second-order-reaction rate constant k was 0.11L/(mol.s)under condition of pH 6.86 and water temperature(Tw) 287K. Reaction activation energy was 72.31 kJ/mol, indicating that the reaction could take place under usual water treatment conditions. The reaction rate constants in acidic and alkali media were greater than that in neutral medium. Chlorite ion could slightly increase reaction rate in acidic medium. p-aminophenol and azobenzene were detected by GC-MS as intermediates.     

Reverse logistics in the Chinese auto-parts firms: implementation framework development through multiple case studies

In recent years, the implementation of reverse logistics (RL) in automobile manufacturing has drawn extensive interest from the Chinese government that has launched relevant take-back and environmental regulations and pilot projects. This study focuses on RL implementation issues in Chinese auto-parts manufacturing sector. Based on comprehensive literature review and multiple case studies in the Chinese auto-parts firms, this paper proposes a conceptual RL framework and highlights the major implementation issues. The purpose of this paper is to draw an overall picture of RL in the Chinese context, highlighting implementation issues in the auto-parts sector. Our study suggests that Chinese RL implementation requires close government monitoring mechanism and incentives, top management commitment within firms, technology and human capabilities support.