Land-use forecasting and hydrologic model integration for improved land-use decision support

This paper develops a methodology for integrating a land-use forecasting model with an event scale, rainfall-runoff model in support of improving land-use policy formulation at the watershed scale. The models selected for integration are loosely coupled, structured upon a common GIS platform that facilitates data exchange. The hydrologic model HEC-HMS is calibrated for a specific storm event that occurred within central Washington State. The land-use forecasting model, What If? is implemented to forecast future spatial distributions of low-density residential land-uses under low and high population growth estimates. Forecasted land-use distribution patterns for the years 2015, 2025, and 2050 are then used as land-use data input for the calibrated hydrologic model, keeping all other parameters constant. Impacts to the stream discharge hydrograph are predicted as the study area becomes increasingly developed as forecasted by What If?. The initial results of this integration process demonstrate the synergy that can be generated through the linkage of the selected models. The ability to quantifiably forecast the potential hydrologic implications of proposed land-use policies before their implementation offers land-use decision-makers a valuable tool for discerning which proposed land-use alternatives will be effective at minimizing storm water runoff.     

Renewable energy in remote communities

This research has demonstrated that even in a small urbanised country like Britain, communities can still be remote. The paper analyses the nature of remote settlements and suggests that beyond the rural idyll, there are deprived communities. In order to obtain real data, a study area in the North Pennines was selected. The types of remote communities were evident throughout the study area and one of each type was selected for further study. It became clear that villages with an industrial base had most potential, due to high energy demand, vulnerability and community involvement. A village with a high measure of multiple deprivation and suffering from fuel poverty was chosen for a more detailed investigation. Energy demand profiles were developed and candidate technologies nominated. The latter were tested by filters that assessed fitness for application, robustness and autonomy. The most appropriate combinations of technologies were proposed. The residents and their community representatives were involved in the process and recognised the benefits of the proposals to themselves and others.     

Distance and flow effects on microsphere transport in a large gravel column

Consumption of microbially contaminated ground water can cause adverse health effects and the processes involved in pathogen transport in aquifers need to be understood. The influences of distance, flow velocity, and colloid size on colloid transport were examined in homogenous pea-gravel media using an 8-m column and three sizes (1, 5, and 10 microm) of microspheres. Experiments were conducted at three flow rates by simultaneously injecting microspheres with a conservative tracer, bromide. Observed concentrations were simulated with CXTFIT and analyzed with filtration theory. The results demonstrate that colloid concentration is strongly log-linearly related to transport distance (as suggested by filtration theory) in coarse gravels, similar to our previous field studies. In contrast, the log-linear relationship is often reported to be invalid in fine porous media. The observed log-linear relationship is possibly because straining is negligible in the coarse gravels investigated. This has implications in predicting setback distances for land disposal of effluent, and suggests that setback distances in gravel aquifers can be estimated using constant spatial removal rates (f). There was an inverse relationship between transport distance and colloidal concentration, but not with temporal attachment rate (katt) and collision coefficient (alpha). Increases in flow velocity result in increasing colloidal recovery, katt and alpha but decreasing f. Increases in sphere size result in decreasing colloidal recovery with increasing katt, f, alpha, and velocity enhancement. Diffusion is the dominant collision mechanism for 1-microm spheres (81-88%), while settling dominates for 5- and 10-microm spheres (> 87%), and interception is very small for all spheres investigated.     

FUNDAMENTAL INVESTIGATION OF GRAVITY CURRENTS WITH VARYING DENSITY1

ABSTRACT: A one-dimensional, gradually varying, non-uniform, flow equation is developed to describe the movement of a variable density gravity current through a reservoir. A linearly decreasing underflow density function is used to investigate the effect of in-reservoir density reduction on typical gravity current flow profiles. Only two types of flow profiles are found to exist for varying density underflows: Type I profiles where the underflow asymptotically approaches a horizontal surface, and Type III profiles where the underflow vertically approaches critical depth. Type I profiles pass through a transitional depth as the underflow density approaches that of the upper layer. Results indicate that a reservoir can be segmented into four distinct spatial regions with well defined flow profile characteristics. The location of these regions allows the sketching of interfacial flow profiles along with identifying the location of transitional depth conditions. Transitional depth conditions are utilized as the logical starting point for Type I flow profile numerical computation. (KEY WORDS: density; fluid flow; reservoirs; hydraulics.)     

ESTIMATING TRANSMISSIVITY AND HYDRAULIC CONDUCTIVITY OF CHICOT AQUIFER FROM SPECIFIC CAPACITY DATA1

ABSTRACT: Specific capacity data obtained from Well Construction reports which are available from USGS offices, can provide useful estimates of tranamissivity (T), and hydraulic conductivity (K), of an aquifer. The Chicot Aquifer in Louisiana is one of the largest sources of fresh ground water in North America. Hydrologic data collected for the Chicot Aquifer indicate that specific capacity tests can be used in estimating local and regional values for T and K, if the Cooper-Jacob equation for transient flow is used with proper corrections for well loss and partial penetration. Where full scale pumping test data are scarce, specific capacity test data that are adequately distributed spatially can be used to map changes in T and K values and can be summarized statistically to indicate applicable regional values. A computer program called “TGUESS” which is available from International Ground Water Modeling Center, Holcomb Research Institute, was used in this study. The contour maps for T and K values are prepared for different well depth intervals to avoid wide variation of values.     

Environmental management information systems: New tools for measuring performance

Successful implementation of environmental management information systems (EMIS) has become essential to the success of total quality environmental management (TQEM) programs. Effective TQEM programs will be early indicators of which companies survive and thrive in today's competitive business environment. Highly competitive industries such as chemicals, electronics, and oil and gas are becoming very effective in cooperating to develop metrics, models, and tools that are based on business processes rather than regulatory edicts. Now electric power companies, newly exposed to market competition, are starting to develop and implement these metrics, standards, and tools. That industry provides a model for joining TQEM and EMIS.     

Forging new links between environmental management,information systems,and business processes

This article is excerpted from Chapter 1 of Environmental Management Information Systems, which will be published by McGraw-Hill in 1994. A central theme of the book is that all successful implementations of environmental management information systems (EMIS) are based on the appropriate alignment of goals and procedures from three enterprise domains: business processes, environmental management, and information systems. Environmental managers (EM) and information systems (IS) professionals have each been guilty of seeing their functions as primary, domains of specialized scientific expertise inaccessible to outsiders. In fact, however, the enterprise is the customer for both domains; without successful business strategies and systems the enterprise does not require either EM or IS wizards. This article shows why and how essential it is that each of the three domains understands enough of the other two domains to structure good decisions.     

Removal of selenate from water by zerovalent iron

Zerovalent iron (ZVI) has been widely used in the removal of environmental contaminants from water. In this study, ZVI was used to remove selenate [Se(VI)] at a level of 1000 microg L(-1) in the presence of varying concentrations of Cl-, SO(2-)4, NO(-)3, HCO(-)3, and PO(3-)4. Results showed that Se(VI) was rapidly removed during the corrosion of ZVI to iron oxyhydroxides (Fe(OH)). During the 16 h of the experiments, 100 and 56% of the added Se(VI) was removed in 10 mM Cl- and SO(2-)4 solutions under a closed contained system, respectively. Under an open condition, 100 and 93% of the added Se(VI) were removed in the Cl- and SO(2-)4 solutions, respectively. Analysis of Se species in ZVI-Fe(OH) revealed that selenite [Se(IV)] and nonextractable Se increased during the first 2 to 4 h of reaction, with a decrease of Se(VI) in the Cl- experiment and no detection of Se(VI) in the SO(2-)4 experiment. Two mechanisms can be attributed to the rapid removal of Se(VI) from the solutions. One is the reduction of Se(VI) to Se(IV), followed by rapid adsorption of Se(IV) to Fe(OH). The other is the adsorption of Se(VI) directly to Fe(OH), followed by its reduction to Se(IV). The results also show that there was little effect on Se(VI) removal in the presence of Cl- (5, 50, and 100 mM), NO(-)3 (1, 5, and 10 mM), SO(2-)4 (5 mM), HCO(-)3 (1 and 5 mM), or PO(3-)4 (1 mM) and only a slight effect in the presence of SO(2-)4 (50 and 100 mM), HCO(-)3 (10 mM), and PO(3-)4 (5 mM) during a 2-d experiment, whereas 10 mM PO(3-)4 significantly inhibited Se(VI) removal. This work suggests that ZVI may be an effective agent to remove Se from Se-contaminated agricultural drainage water.