Sixty years of habitat decline: impact of land-cover changes in northern Italy on the decreasing ortolan bunting <Emphasis Type=Italic>Emberiza hortulana</Emphasis>

Habitat loss and degradation are main global threats to biodiversity, and land-use changes in agriculture-dominated landscapes are crucial for an important portion of biodiversity, especially in Europe. We evaluated the effects of land-use changes (1954–2012) on a threatened species, the ortolan bunting, in an agricultural area crucial for its conservation in Italy. We built a distribution model for ortolan bunting in current landscapes and then re-projected it to past scenarios (1954 and 1999–2000). We evaluated the most important land-use changes occurred and estimated their effects on habitat suitability. Bunting occurrence was mostly affected by the extent of grassland (positively; used as foraging/breeding ground), shrubland (quadratic effect; perches/shelter), forest and urbanized land (negatively), and by solar radiation (positively) and slope (quadratic), consistent with other studies carried out especially in southern Europe. The potential distribution of the species was much larger in the past: the estimated decline in suitable habitat is 44–72 % (since 1999–2000/1954), coherent with historical data suggesting strong decline and contraction. Changes in suitability (1954–2012) were mostly associated with changes in the cover of forest, vineyards and abandoned areas (negatively), and shrubland (positively). Land-use/land-cover changes are the main drivers of species occurrence and of habitat decline. The heterogeneous landscape of hilly/low-mountain sites in this area, characterized by a mix of habitats offering complementary resources to ortolan buntings and other species of conservation concern, is currently threatened by abandonment and intensification, but its maintenance may be promoted by a correct definition of Rural Development Programme measures.     

Optimization of the electrocoagulation process for the removal of copper, lead and cadmium in natural waters and simulated wastewater

Chemical, electrochemical and flow variables were optimized to examine the effectiveness of the electrocoagulation process for the removal of copper, lead and cadmium. The electrochemical process, which uses electrodes of commercial laminate steel, was applied to simulated wastewater containing 12 mg dm(-3) of copper, 4 mg dm(-3) of lead and 4 mg dm(-3) of cadmium. The optimum conditions for the process were identified as pH=7, flow rate=6.3 cm(3) min(-1) and a current density between 31 and 54 A m(-2). When the electrode geometric area and time of electrolysis reached critical values, the copper removal reached a maximum value of 80%. A linear relationship was identified between the current density and the mass of generated sludge. In addition, a linear relationship was found between specific energy consumption and current density. The results of this investigation provide important data for the development of an industrial-scale electrolytic reactor.     

Role of volcanic dust in the atmospheric transport and deposition of polycyclic aromatic hydrocarbons and mercury

The role of volcanic ash as scavenger of atmospheric pollutants, in their transport and final deposition to the ground is examined. Attention is focused on polycyclic aromatic hydrocarbons (PAHs) and on particulate mercury (Hgp). The ash-fall deposits studied belong to the 2001 and 2002 eruptive activity of Mount Etna, Southern Italy, and were investigated at three (2001) and four (2002) sites downwind of the major tephra dispersal pattern. The dry deposition of mercury and PAHs was determined, and, in particular, a downward flux to the ground of PAHs (approximately 7.29 microg m(-2) per day) and mercury (750 ng m(-2) per day) was estimated in Catania from October 26 to October 28, 2002. Finally, evidence on the anthropogenic origin of PAHs scavenged from the troposphere by volcanic ash is supported by the analysis of PAH compositions in granulometrically homogeneous fractions.     

Combinations of Horizontal and Vertical Flow Constructed Wetlands to Improve Nitrogen Removal

Nitrogen removal in wetlands is achieved through two pathways: (a) N cycling and (b) storage. N cycling is a permanent removal pathway. There has been an increasing interest in the development of technologies to alleviate permanent nitrogen removal limitation in constructed wetlands by ensuring prevalence of conditions enhancing N cycling. The purpose of this study is to review an emerging technology of vegetated submerged bed constructed wetland system aimed at improving nitrogen removal in wetlands through rational system design. The design and performance of this system type is evaluated. The oxygen transfer capacity and nitrogen removal mechanisms on system performance are evaluated. Constructed wetland combinations most commonly consist of vertical flow (VF) and horizontal flow (HF) beds where VF and HF are aimed at nitrification and denitrification, respectively. Nitrate nitrogen accumulation is the most limiting factor in typical VF based systems.     

Evaluation of a portable nephelometer against the Tapered Element Oscillating Microbalance method for monitoring PM(2.5)

Monitoring personal exposure to particle matter (PM(2.5)) in ambient air requires performing measurements using portable monitors. In this work, the portable nephelometer SidePak? AM510 Personal Aerosol Monitor manufactured by TSI Inc. was evaluated against a Tapered Element Oscillating Microbalance (TEOM) equipped with a Filter Dynamics Measurements System (FDMS). Conventionally, the SidePak is calibrated with respect to the Arizona Road Test Dust and then multiplied by an environmental calibration factor to yield mass concentration. To adapt this calibration to specific field conditions, we present an implementation of this calibration by introducing a growing factor correction which takes into account relative humidity and the dry and wet portions of the refractive index estimated from TEOM-FDMS measurements. PM(2.5) sampling with several SidePaks AM510 was carried out in background and rural sites in the Po Valley (Italy). Modeled SidePak data were plotted vs. reference TEOM-FDMS data which show a good agreement.     

3D Numerical Model of the Thermal Interaction Between Sediment–Water–Atmosphere

This paper describes a three-dimensional numerical model of heat flux using finite-difference approximation for the simulation, prediction, and visualization of sediment, water, and air temperature, applied in Villa del Mar saltmarsh, Bahía Blanca Estuary, Argentina. To make this computation, we develop an open-source software tool called Hemera 1.0 which is characterized by having little complexity and low hardware requirements. The model considers three heat transfer processes: diffusion, convection, and radiation, using bulk aerodynamic formulas as boundary conditions between the interfaces. The aforementioned model was applied for the month of January 2009. The model reproduced adequately the physical processes of the heat balance and showed an adequate response to changes in the boundary conditions. In addition, according to the model design, meteorological and oceanographic data and some soil properties are the only data input used for modeling. It is easily adaptable to other environments such us lakes and reservoirs, among others, in order to carry out similar studies.     

Pendimethalin and oxyfluorfen degradation under two irrigation conditions over four years application

A four-year field study was conducted to determine the effect of pluviometric conditions on pendimethalin and oxyfluorfen soil dynamics. Adsorption, dissipation and soil movement were studied in a sandy loam soil from 2003 to 2007. Pendimethalin and oxyfluorfen were applied every year on August at 1.33 and 0.75 kg ha^?1, respectively. Herbicide soil concentrations were determined at 0, 10, 20, 40, 90 and 340 days after application (DAA), under two pluviometric regimens, natural rainfall and irrigated (30 mm every 15 days during the first 90 DAA). More than 74% of the herbicide applied was detected at the top 2.5 cm layer for both herbicides, and none was detected at 10 cm or deeper. Pendimethalin soil half-life ranged from 10.5 to 31.5 days, and was affected mainly by the time interval between application and the first rain event. Pendimethalin soil residues at 90 DAA fluctuated from 2.5 to 13.8% of the initial amount applied, and it decreased to 2.4 and 8.6% at 340 DAA. Oxyfluorfen was more persistent than pendimethalin as indicated by its soil half-life which ranged from 34.3 to 52.3 days, affected primarily by the rain amount at the first rainfall after application. Oxyfluorfen soil residues at 90 DAA ranged from 16.7 to 34.8% and it decreased to 3.3 and 17.9% at 340 DAA. Based on half-life values, herbicide soil residues after one year, and soil depth reached by the herbicides, we conclude that both herbicides should be considered as low risk to contaminate groundwater. However, herbicide concentration at the top 2.5 cm layer should be considered in cases where runoff or soil erosion could occur, because of the potential for surface water contamination.     

Application of photocatalysis as a post treatment method of a heterotrophic-autotrophic denitrification reactor effluent

The aim of this study is the application of photocatalysis as an effective post treatment scheme for the removal of the organic matter and bacteria released by an innovative biological denitrification process referred to as heterotrophic-autotrophic denitrification, which combines heterotrophic and autotrophic denitrification processes. Photocatalytic treatment was applied using TiO2 as a photocatalyst in the loading range of 0.25-2.00 g l(-1) for irradiation periods up to 60 min using a black light fluorescent lamp with an intensity of I(0)=1309 microW cm(-2). The photocatalytic inactivation data were modelled to pseudo first order kinetics as well as by the areal rates to evaluate the photocatalyst loading effect. Chlorination was used as a final disinfection step to attain an overall inactivation of total coliforms as well as to the formation of very low level of trihalomethanes.     

Different compensatory mechanisms in two metal-accumulating aquatic macrophytes exposed to acute cadmium stress in outdoor artificial lakes

Mechanisms underlying cadmium (Cd) detoxification were compared in two aquatic macrophytes commonly used in phytoremediation, namely Pistia stratiotes L. and Eichhornia crassipes (Mart.) Solms. To simulate Cd pollution in the open environment, plants growing in outdoor artificial lakes were exposed for 21d to either 25 or 100microM Cd, in two consecutive years. Toxicity symptoms were absent or mild in both species. Metal accumulation was much higher in the roots of P. stratiotes, whereas in E. crassipes a comparatively higher fraction was translocated to the leaves. In both species, Cd was neither included in phenolic polymers or Ca-oxalate crystals, nor altered the levels of Cd-complexing organic acids. Glutathione levels were constitutively remarkably higher and much more responsive to Cd exposure in P. stratiotes than in E. crassipes. Abundant phytochelatin synthesis occurred only in P. stratiotes, both in roots and in leaves. In E. crassipes, on the other side, the constitutive levels of some antioxidant enzymes and ascorbate were higher and more responsive to Cd than in P. stratiotes. Thus, in these two aquatic plants grown in the open, different detoxification mechanisms might come into play to counterbalance Cd acute stress.