Genotype-specific responses of fluctuating asymmetry and of preadult survival to the effects of lead and temperature stress in Drosophila melanogaster

Although fluctuating asymmetry (FA) increases with exposure to certain types of environmental stressors such as temperature extremes, relatively little is known about the effects of interaction (e.g., synergism) between known sources of environmental stress on FA. Knowledge of such interaction effects, and of the magnitude of genotype-by-environment interaction, are of fundamental importance toward predicting the usefulness of FA as a bioindicator of environmental pollution. We tested for synergistic effects on FA between elevated temperature and exposure to lead, and examined FA responses simultaneously in four genetic strains of Drosophila melanogaster known to differ in their degree of developmental instability, and presumably in their buffering capacity. In the absence of heavy metal, bristle FA increased with temperature, but in the presence of lead, FA at high temperature (30 (degrees)C) was reduced to levels similar, or below, that at lower temperature (25 (degrees)C). This temperature by lead interaction was statistically significant, but paradoxical in that the disruptive effects of temperature appeared to be attenuated in the presence of the heavy metal. In no case was there a significant effect of lead on bristle FAs, despite documented assimilation of heavy metal by flies, and in no case was the genotype by environment interaction significant. Whereas lead treatment did not influence survival, survival was reduced at the high temperature, but significantly so only in one genetic strain (Oregon-R). There was no relationship between survival and FA across stress treatments within lines. Thus, any disproportionate stress-induced mortality in developmentally unstable classes (developmental selection) was unlikely to bias the FA results. Our results underscore the need for independent replication of significant findings before FA-based biomonitoring can be responsibly and effectively implemented. The results call for caution in using FA as a biomarker of stress, because stress factors may interact in complex and unpredictable ways, which could result in erroneous conclusions about real levels of stress present in field populations, under the unduly simplistic assumption that stress factors will act additively to increase FA.     

A new model for climate system analysis: Outline of the model and application to palaeoclimate simulations

We present a new reduced-form model for climate system analysis. This model, called CLIMBER-2 (for CLIMate and BiosphERe, level 2), fills the current gap between simple, highly parameterized climate models and computationally expensive coupled models of global atmospheric and oceanic circulation. We outline the basic assumptions implicit in CLIMBER-2 and we present examples of climate system analysis including a study of atmosphere–ocean interaction during the last glacial maximum, an analysis of synergism between various components of the climate system during the mid-Holocene around 6000 years ago, and a transient simulation of climate change during the last 8000 years. These studies demonstrate the feasibility of a computationally efficient analysis of climate system dynamics which is a prerequisite for future climate impact research and, more generally, Earth system analysis, i.e., the analysis of feedbacks between our environment and human activities.     

APPLICATION OF THE BASINS DATABASE AND NPSM MODEL ON A SMALL OHIO WATERSHED1

ABSTRACT: The purpose of this study was to evaluate the Better Assessment Science Integrating Point and Nonpoint Sources (BASINS) watershed management system. BASINS data were used with the NPSM model to predict discharge and sediment concentrations at the outlet of a 103 km² Ohio watershed. It was concluded that the NPSM model should always be calibrated but only a few of the parameters provided with BASINS needed to be calibrated. For a three‐year study period, there was a 2 percent underestimation of discharge using area weighted precipitation values and a 25 percent overestimation using the single station data in BASINS. A comparison of observed and predicted monthly discharge resulted in an r² of 0.86 with area‐weighted precipitation and an r² of 0.74 with the single station data. Calibrating the model to substantially improve sediment predictions was unsuccessful and we concluded that a calibration period of one year was too short. For the three‐year study period, the r² for sediment was 0.36 with a slope of 0.37 and an intercept of 18.8 mg/l. The mean observed and predicted sediment concentrations were 27.1 mg/l and 22.6 mg/l, respectively.     

The first record of a sauropod dinosaur from Antarctica

Sauropoda is one of the most diverse and geographically widespread clades of herbivorous dinosaurs, and until now, their remains have now been recovered from all continental landmasses except Antarctica. We report the first record of a sauropod dinosaur from Antarctica, represented by an incomplete caudal vertebra from the Late Cretaceous of James Ross Island. The size and morphology of the specimen allows its identification as a lithostrotian titanosaur. Our finding indicates that advanced titanosaurs achieved a global distribution at least by the Late Cretaceous.     

Timing matters when assessing dominance and chemical signatures in the paper wasp Polistes dominulus

A recent study (Izzo et al., Behav Ecol Sociobiol 64: 857–864, 2010) reported that cuticular hydrocarbons (CHCs) correlate with fertility, not dominance, in the paper wasp Polistes dominulus thus contradicting the results of recent investigations which concluded that social dominance is the main determinant for CHC signatures in this species. We suggest here that different forms of dominance in the pre-nesting and post-nesting phases caused the apparently contradictory results. Thus the assumption that dominance behaviour in the pre-nesting stage is synonymous with dominance after colony foundation is incorrect. We provide standardised definitions for forms of “dominance” observed in the P. dominulus life cycle to avoid apparent discrepancies in the future among studies dealing with the same topics in different annual stages.     

Estimation of plant protection product application dates for environmental fate modeling based on phenological stages of crops

According to the EU directive 91/414/EEC potential environmental concentrations of pesticides have to be assessed with environmental fate models. For the calculation of pesticide concentrations it is necessary to provide an application date which has to match the specific Biologische Bundesanstalt, Bundesamt, Chemische Industrie (BBCH) stage at which the pesticide shall be applied. If these application dates are not available for a specific stage, crop and country they must be estimated, which adds an additional uncertainty to the predicted concentrations. In the present study, we therefore evaluate to which extent application dates can be derived from phenological data. For this analysis phenological data, converted to BBCH stages, of two field crops provided by the German Weather Service (DWD) were analyzed. We found a linear correlation between BBCH stages and the respective appearance dates, which can be used for interpolation of appearance dates of specific BBCH stages. Remarkably, when comparing BBCH stages from Germany and the Czech Republic almost identical correlations of appearance dates and BBCH stages were found. In the next step, soil and climate data from Joint Research Centre (JRC) were analyzed together with phenological data in order to evaluate if BBCH stages can be estimated for countries with other climate or soil conditions. This analysis revealed that temperature, global radiation and evaporation were the parameters with the strongest impact. These parameters were used for estimating appearance dates of BBCH stages for other countries. Exemplarily, appearance dates for maize BBCH were calculated for Italy. Estimated and observed appearance dates showed a high concordance (on average six days difference). Finally, the political of impact a variation of a few days on calculated pesticide concentration was analyzed. Exemplarily, the pesticide fate model FOCUS PEARL was used to estimate pesticide groundwater concentrations. When calculating concentrations for application dates varying by ± two weeks, concentrations in groundwater usually varied very little. The highest variation was found for application at BBCH 30 in maize (6.6 % variation over all scenarios). These results showed that the uncertainty included in the estimation of appearance dates of BBCH stages for other countries has a relatively small effect on the results of PEARL and consequentially on the decision of the pesticide risk assessment by changing only the application date.     

The weight method: a new screening method for estimating pesticide deposition from knapsack sprayers in developing countries

Investigations of occupational and environmental risk caused by the use of agrochemicals have received considerable interest over the last decades. And yet, in developing countries, the lack of staff and analytical equipment as well the costs of chemical analyses make it difficult, if not impossible, to monitor pesticide contamination and residues in humans, air, water, and soils. A new and simple method is presented here for estimation of pesticide deposition in humans and soil after application. The estimate is derived on the basis of water mass balance measured in a given number of high absorbent papers under low evaporative conditions and unsaturated atmosphere. The method is presented as a suitable, rapid, low cost screening tool, complementary to toxicological tests, to assess occupational and environmental exposure caused by knapsack sprayers, where there is a lack of analytical instruments. This new method, called the “weight method”, was tested to obtain drift deposition on the neighbouring field and the clothes of the applicator after spraying water with a knapsack sprayer in one of the largest areas of potato production in Colombia. The results were confirmed by experimental data using a tracer and the same set up used for the weight method. The weight method was able to explain 86% of the airborne drift and deposition variance.     

Effects of selected pharmaceutically active compounds on the ammonia oxidizing bacterium Nitrosomonas europaea

Pharmaceutically active compounds (PhACs) are commonly found in wastewater influent. However, little research has focused on determining their impact on fundamental processes in wastewater treatment such as nitrogen removal. In this study, focus was placed on 4 commonly occurring PhACs (ketoprofen, naproxen, carbamazepine and gemfibrozil). Their effect was ascertained in the ammonia oxidizing bacterium (AOB), Nitrosomonaseuropaea in terms of membrane integrity and nitrite production. These PhACs were shown to inhibit nitrite production at concentrations of 1 and 10 μM while no effect was observed at 0.1 μM. The maximum observed nitrification inhibition was 25%, 29%, 22% and 26% for ketoprofen, naproxen, carbamazepine and gemfibrozil, respectively. A decrease in the live/dead ratio ranging from 10% to 16% suggests that these PhACs affect membrane integrity in N.europaea. The difference in nitrite production between PhACs treated cells and non PhAC treated controls was still significant following washing suggesting that inhibition is irreversible. Finally, nitrite production when adjusted to the live fraction of cells was also found to decrease suggesting that PhACs inhibited the activity of surviving cells. These results suggest that the presence of PhACs may affect AOB activity and may impact nitrogen removal, a key function in wastewater treatment. Follow up studies with additional AOB and in mixed culture are needed to further confirm these results.     

Microbiological characterization and specific methanogenic activity of anaerobe sludges used in urban solid waste treatment

This study presents the microbiological characterization of the anaerobic sludge used in a two-stage anaerobic reactor for the treatment of organic fraction of urban solid waste (OFUSW). This treatment is one alternative for reducing solid waste in landfills at the same time producing a biogas (CH(4) and CO(2)) and an effluent that can be used as biofertilizer. The system was inoculated with sludge from a wastewater treatment plant (WWTP) (Río Frío Plant in Bucaramanga-Colombia) and a methanogenic anaerobic digester for the treatment of pig manure (Mesa de los Santos in Santander). Bacterial populations were evaluated by counting groups related to oxygen sensitivity, while metabolic groups were determined by most probable number (MPN) technique. Specific methanogenic activity (SMA) for acetate, formate, methanol and ethanol substrates was also determined. In the acidogenic reactor (R1), volatile fatty acids (VFA) reached values of 25,000 mg L(-1) and a concentration of CO(2) of 90%. In this reactor, the fermentative population was predominant (10(5)-10(6)MPN mL(-1)). The acetogenic population was (10(5)MPN mL(-1)) and the sulphate-reducing population was (10(4)-10(5)MPN mL(-1)). In the methanogenic reactor (R2), levels of CH(4) (70%) were higher than CO(2) (25%), whereas the VFA values were lower than 4000 mg L(-1). Substrate competition between sulphate-reducing (10(4)-10(5)MPN mL(-1)) and methanogenic bacteria (10(5)MPN mL(-1)) was not detected. From the SMA results obtained, acetoclastic (2.39 g COD-CH(4)g(-1)VSS(-1)day(-1)) and hydrogenophilic (0.94 g COD-CH(4)g(-1)VSS(-1)day(-1)) transformations as possible metabolic pathways used by methanogenic bacteria is suggested from the SMA results obtained. Methanotrix sp., Methanosarcina sp., Methanoccocus sp. and Methanobacterium sp. were identified.