Implementing In-Stream Nutrient Processes in Large-Scale Landscape Modeling for the Impact Assessment on Water Quality

For a long time, watershed models focused on the transport of chemicals from the terrestrial part of the watershed to the surface water bodies by leaching and erosion. After the substances had reached the surface water, they were routed through the channel network often without any further transformation. Today, there is a need to extend watershed models with in-stream processes to bring them closer to natural conditions and to enhance their usability as support tools for water management and water quality policies. This paper presents experience with implementing in-stream processes in a ecohydrological dynamic watershed model and its application on the large scale in the Saale River basin in Germany. Results demonstrate that new implemented water quality parameters like chlorophyll a concentrations or oxygen amount in the reach can be reproduced quite well, although the model results, compared with results achieved without taking into account algal and transformation processes in the river, show obvious improvement only for some of the examined nutrients. Finally, some climate and water management scenarios expected to impact in-stream processes in the Saale basin were run. Their results illustrate the relative importance of physical boundary conditions on the amount and concentration of the phytoplankton, which leads to the conclusion that measures to improve water quality should not only take nutrient inputs into account but also climate influences and river morphology.     

Effects of nickel chloride and oxygen depletion on behaviour and vitality of zebrafish (Danio rerio, Hamilton, 1822) (Pisces, Cypriniformes) embryos and larvae

We examined acute (2 h exposure of 5-day-old larvae) and subchronic (exposure from fertilization up to an age of 11 days) effects of NiCl(2).6H2O on embryos and larvae of zebrafish (Danio rerio), both alone and in combination with oxygen depletion. The following endpoints were recorded: acute exposure: locomotory activity and survival; subchronic exposure: hatching rate, deformations, locomotory activity (at 5, 8 and 11 days) and mortality. In acute exposures nickel chloride (7.5-15 mg Ni/L) caused decreasing locomotory activity. Oxygen depletion (or=10 mg Ni/L resulted in delayed hatching at an age of 96 h, in decreased locomotory activity at an age of 5 days, and increased mortality at an age of 11 days (LC20=9.5 mg Ni/L). The observed LOEC for locomotory activity (7.5 mg Ni/L) is in the range of environmentally relevant concentrations. Since locomotory activity was already affected by acute exposure, this parameter is recommended to supplement commonly recorded endpoints of toxicity.     

Self‐leadership in the context of part‐time teleworking

Employees who work periodically in both a traditional office and home office (part‐time teleworkers) face opportunities and risks related to both working locations. As self‐leadership might play a crucial role in this context, we examined within‐person variations in self‐leadership (self‐reward, self‐punishment, self‐cueing, self‐goal setting, imagining successful performance, and evaluation of beliefs and assumptions) on home days and office days. In a typical workweek, 195 part‐time teleworkers filled out daily surveys (729 days), and we examined the relationship between working location (office and home) and self‐leading behavior as well as the mediating role of autonomy. Finally, we investigated whether self‐leading behavior relates to ego depletion and work satisfaction at the end of the working day. Multilevel analyses revealed that part‐time teleworkers reported higher use of self‐reward, self‐goal setting, and visualization of successful performance on home days than on office days. The association between working location and self‐reward, self‐goal setting, visualization of successful performance, and evaluation of beliefs and assumptions was mediated by autonomy. There were no indirect effects of working location on ego depletion through self‐leadership. However, we found that on home days, part‐time teleworkers were more satisfied with their job at the end of the workday through self‐goal setting.     

On the timing of moulting processes in reproductively active Northern krill Meganyctiphanes norvegica

The interactions between moult phasing, growth and environmental cues in Northern krill (Meganyctiphanes norvegica) were examined through analysing populations at seasonal, weekly, and daily timescales. The analyses were carried out on resident populations of krill found in three different neritic locations that experience similar environmental signals (the Clyde Sea, Scotland; the Kattegat, Denmark; Gullmarsfjord, Sweden). Seasonal analyses were carried out on the Clyde Sea population and showed that moulting frequency increased significantly moving from winter to summer. The proportion of moulting females in summer samples was often more than double the proportion of moulting males, suggesting that females had a comparatively shorter intermoult period (IMP). Weekly samples taken from the Kattegat showed a similar pattern. However, although the difference between the proportion of female and male moulters was significant in one week, it was not another, mainly because of the variability in the proportion of female moulters. Such variability in females was equally evident in the daily samples taken at Gullmarsfjord. It suggests that females have a shorter IMP (12.5 days) than males (18.4 days) and are more likely to moult in synchrony. Nevertheless, the daily samples revealed that males are also capable of moult synchronisation, although less frequently than females. Shortened IMPs in females were not a result of the abbreviation of specific moult stages. Accordingly, reproductive activity did not alter the course of the normal moult cycle. There was no significant difference between the total body lengths of males and females indicating that females achieve the same levels of growth despite moulting more frequently and having to provision the energy-rich ovaries. This is in contrast to most other crustaceans where the energy costs of reproduction reduce female growth. The fact that females were less abundant than males, probably by suffering a greater level of mortality, suggests that different behavioural strategies, particularly vertical migration regimes, were adopted by each sex to maximise growth and reproduction.     

Effects of various fatty acid amendments on a microbial digester community in batch culture

Since biogas production is becoming increasingly important the understanding of anaerobic digestion processes is fundamental. However, large-scale digesters often lack online sensor equipment to monitor key parameters. Furthermore the possibility to selectively change fermenting parameter settings in order to investigate methane output or microbial changes is limited. In the present study we examined the possibility to investigate the microbial community of a large scale (750,000 L) digester within a laboratory small-scale approach. We studied the short-term response of the downscaled communities on various fatty acids and its effects on gas production and compared it with data from the original digester sludge. Even high loads of formic acid led to distinct methane formation, whereas high concentrations of other acids (acetic, butyric, propionic acid) caused a marked inhibition of methanogenesis coupled with an increase in hydrogen concentration. Molecular microbial techniques (DGGE/quantitative real-time-PCR) were used to monitor the microbial community changes which were related to data from GC and HPLC analysis. DGGE band patterns showed that the same microorganisms which were already dominant in the original digester re-established again in the lab-scale experiment. Very few microorganisms dominated the whole fermenting process and species diversity was not easily influenced by moderate varying fatty acid amendments - Methanoculleus thermophilus being the most abundant species throughout the variants. MCR-copy number determined via quantitative real-time-PCR - turned out to be a reliable parameter for quantification of methanogens, even in a very complex matrix like fermenter sludge. Generally the downscaled batch approach was shown to be appropriate to investigate microbial communities from large-scale digesters.     

An evaluation of occupational accidents in the wooden furniture industry - A regional study in South East Asia

Studies on the rate of occupational accidents among workers in the wooden furniture industry is sparse, although the industry is deemed to be highly accident prone. Therefore, the rate of occupational accidents among workers in the wooden furniture industry in Malaysia, Thailand, Indonesia and Vietnam were studied, in 240 furniture manufacturing factories, using a structured questionnaire. The findings of the study suggest that contract workers are less prone to occupational accidents compared to their permanent counterparts, and hence, are more productive. Further, the results also revealed that the contract workers have a more positive attitude towards the work, and hence, pick up the essentials of safe working practices quickly. It must therefore be recognized that the “production oriented mentality” prevalent in the wooden furniture industry, which has been argued to compromise occupational safety and health standards in the industry may be debatable. In this context, it is essential for the policy makers to re-examine the employment of contract workers for the furniture manufacturing industry, as changing the psycho-economic parameters of the industry may be warranted before the industry is deemed attractive to a permanent workforce.     

Bakterielle Biotestverfahren zur Bestimmung der Toxizität von Abfällen

For a risk assessment of wastes, fast and sensitive screening methods are required to detect possible toxic effects. In this study, different leachability methods (DIN 38414, part 4; EPA 1310; EPA 1320) were used to prepare aqueous leachates from different wastes; these leachates were rested in different bacterial toxicity test systems for possible toxic effects. As bacterial toxicity tests, the luminescent bacteria test and the growth inhibition test with activated sludge bacteria were used. The test systems showed a good agreement of the results from the different leaching methods, thereby indicating the reliability of the test systems used. The luminescent bacteria inhibition test showed a higher sensitivity than the growth inhibition test which is in good accordance with literature data. We conclude that both test systems are well suited to assess the toxic potential of aqueous waste leachates.