The impact of preventive coping on business travelers' work and private life

Frequent business travel can be a burden for travelers' work and private life. We tested whether preventive coping (the proactive accumulation of resources in advance of potential stressors) makes such trips beneficial despite their potential to be stressful. In a longitudinal three‐wave study, we investigated whether frequent travel relates to an increase or decrease in work–life balance, emotional exhaustion, work engagement, and relationship satisfaction depending on preventive coping. Findings from a sample of 133 frequent business travelers revealed significant indirect effects for emotional exhaustion, work engagement, and relationship satisfaction through work–life balance. Among employees who engaged less in preventive coping, a higher number of business trips was related to a decrease in work–life balance, which, in turn, was related to more emotional exhaustion, less work engagement, and lower relationship satisfaction. Among those who reported higher preventive coping, we found opposing indirect effects: Frequent travel was related to an increase in work–life balance and, in turn, to less emotional exhaustion, more work engagement, and higher relationship satisfaction. These findings advance our knowledge in the field of business travel, future‐oriented coping, and work–life balance. They highlight that travelers and their organizations should resort to preventive coping to make frequent travel more beneficial.     

An experimental design for the optimization of the extraction methods of metallic mobile fractions from environmental solid samples

The evaluation of the cadmium and lead mobile forms from environmental solid samples provides information about their mobility and bioavailability. In the present study, the Cd and Pb mobile fractions were obtained by two modified extraction methods applied to industrial and acidic pH soils or to polluted sediments. In order to highlight that the extraction procedure does not significantly influence the quantitative atomic absorption spectrometric determination of cadmium and lead, the robustness of the extraction methods was evaluated and proven applying a Youden and Steiner factorial design. Within this experimental design, the shaking rate, the shaking time, and the solid/liquid extraction ratio were modified. The measurement uncertainty of the whole analytical procedure was assessed, the contribution of the factors involved in the extraction process being insignificant compared to the other uncertainty sources. The importance of the study is related to the fact that it proves the applicability in the routine laboratory practice of the modified extraction methods by increasing the extraction ratio following thorough optimization and robustness studies.     

Framing natural assets for advancing sustainability research: translating different perspectives into actions

Sustainability is a key challenge for humanity in the context of complex and unprecedented global changes. Future Earth, an international research initiative aiming to advance global sustainability science, has recently launched knowledge–action networks (KANs) as mechanisms for delivering its research strategy. The research initiative is currently developing a KAN on “natural assets” to facilitate and enable action-oriented research and synthesis towards natural assets sustainability. ‘Natural assets’ has been adopted by Future Earth as an umbrella term aiming to translate and bridge across different knowledge systems and different perspectives on peoples’ relationships with nature. In this paper, we clarify the framing of Future Earth around natural assets emphasizing the recognition on pluralism and identifying the challenges of translating different visions about the role of natural assets, including via policy formulation, for local to global sustainability challenges. This understanding will be useful to develop inter-and transdisciplinary solutions for human–environmental problems by (i) embracing richer collaborative decision processes and building bridges across different perspectives; (ii) giving emphasis on the interactions between biophysical and socioeconomic drivers affecting the future trends of investments and disinvestments in natural assets; and (iii) focusing on social equity, power relationships for effective application of the natural assets approach. This understanding also intends to inform the scope of the natural asset KAN’s research agenda to mobilize the translation of research into co-designed action for sustainability.     

Occurrence and temporal variations of the xenoestrogens bisphenol A, 4-<Emphasis Type="Italic">tert</Emphasis>-octylphenol,and tech. 4-nonylphenol in two German wastewater treatment plants

GOAL, SCOPE, AND BACKGROUND: The xenoestrogens bisphenol A, 4-tert-octylphenol, and the technical isomer mixture of 4-nonylphenol (tech. 4-nonylphenol) belong to the group of chemicals which are called endocrine disrupters due to their property of causing hormonal dysfunctions in the endocrine system of organisms at very low concentrations. Bisphenol A, 4-tert-octylphenol, and the tech. 4-nonylphenol (mixture of isomers) were determined in water samples collected from the influent and effluent of two German wastewater treatment plants (WWTP) during a long-time sampling period from February 2003 till August 2005 to assess their occurrence and temporal variations in WWTPs. METHODS: The compounds were extracted and concentrated from water by solid-phase extraction (SPE) using Bond Elut PPL cartridges and quantified by use of gas chromatography-mass spectrometry (GC-MS). RESULTS: The influent concentrations were as follows: Bisphenol A < limit of detection of the method (< ldm)--12,205 ng L(-1), tech. 4-nonylphenol < ldm--10,186 ng L(-1), and 4-tert-octylphenol 39-1,495 ng L(-1). The measured effluent concentrations were lower with values in the range of < ldm--7,625 ng L(-1) for bisphenol A, < ldm--14,444 ng L(-1) for tech. 4-nonylphenol, and < ldm--392 ng L(-1) for 4-tert-octylphenol. All target compounds were largely eliminated during the wastewater treatment process. The elimination efficiency varied between 73% and 93%. DISCUSSION: All analytes show highly fluctuating influent concentrations with very high peak concentrations at particular sampling times. The variation of effluent concentrations is by far lower than the variation of influent concentrations. For tech. 4-nonylphenol, a significant temporal concentration variation has been detected with very high concentrations up to the microgram-per-liter level in the time from February 2003 till July 2003 and clearly decreasing concentrations in the time from June 2004 till August 2005. This corresponds well with the implementation of Directive 2003/53/EC (nonylphenol and nonylphenol ethoxylates in the European Union "may not be placed on the marked or used as a substance or constituent of preparations in concentrations equal or higher than 0.1% by mass") from January 2005 on. Bisphenol A is present in the effluent samples in a wide range of concentrations from below the detection limit to high concentrations up to the microgram-per-liter level. For 4-tert-octylphenol, no particular trend of concentration development has been observed. CONCLUSIONS: Combined SPE and GC-MS proved to be an efficient method to identify and quantify polar organic compounds in environmental samples. With respect to the concentrations measured in the present study, bisphenol A sometimes is the prominent compound in influent samples. Neither bisphenol A nor 4-tert-octylphenol or tech. 4-nonylphenol show seasonal variations. However, there was a significant general trend of decreasing concentrations of tech. 4-nonylphenol in influent and effluent samples from both WWTPs which probably reflects the implementing Directive 2003/53/EC. RECOMMENDATIONS AND PERSPECTIVES: Further research is needed to investigate whether the observed decrease of tech. 4-nonylphenol concentrations in German WWTPs since June 2004 will continue further on. The reason for the high effluent concentrations of bisphenol A in only a few samples has to be clarified in further research. The results from this study provide insight into the concentration development of the xenoestrogens bisphenol A, tech. 4-nonylphenol, and 4-tert-octylphenol in WWTPs in the time span between 2003 and 2005.     

Heavy metal contamination in the vicinity of an industrial area near Bucharest

Background, aim, and scope

Heavy metals such as lead are well known to cause harmful health effects. Especially children are particularly susceptible to increased levels of lead in their blood. It is also a fact that lead concentration is increasing in the environment due to increased anthropogenic activity. The risk of heavy metal contamination is pronounced in the environment adjacent to large industrial complexes. In a combined case study, the environmental pollution by heavy metals was related to children’s health in the vicinity of an industrial area located 4 km south-east from Bucharest about 2 km east from the nearest town—Pantelimon. This site includes companies processing different, nonferrous solid wastes for recovery of heavy metals and producing different nonferrous alloys and lead batteries. In this paper, mainly the results of environmental sampling and analyses are summarized.

Materials and methods

Water, soil, and atmospheric deposition samples were collected from different locations within 3 km from the industrial area. For comparison, samples were also taken from Bucharest. Water samples were filtered (<0.45 μm), extracted by salpetric acid, and quantified by ICP-OES and ICP-MS. Soil samples were dried, sieved (<2 mm), extracted by aqua regia and analyzed by AAS. In order to quantify the atmospheric deposition, three kinds of permanently open collecting pots were used on nine different sites between August and November 2006.

Results

At most sampling locations, the heavy metal concentrations in soil decrease with increasing distance to the presumably major source of pollution. Highest heavy metal concentrations were found in 10–20 cm soil depths. There were also decreasing heavy metal concentrations for atmospheric deposition with increasing distance to the industrial site. In surface and groundwater samples, traces of zinc, copper and lead were detected.

Discussion

The heavy metal concentrations in soil were increased in the study area, mostly under legal action limits in low-concern areas (e.g., 1,000 mg Pb/kg dry soil), but often above action limits for high-concern areas (100 mg Pb/kg dry soil) such as populated areas. The soluble lead concentrations in water samples indicate a need for monitoring and assessing water quality in more detail. The results for atmospheric deposition showed increased dust precipitation and heavy metal loads in the study area compared to Bucharest. However, based on mass flow balance calculations, the actual atmospheric deposition of heavy metals must be much lower than it was in the past decades.

Conclusions

It was shown that highest lead values in water, soil and atmospheric deposition are rather to be found near the investigated industrial site than at the control sites in Bucharest. Our results correspond very well with results that show that children from Pantelimon have significantly increased lead concentrations in their blood compared to children in Bucharest. The increased lead contamination around the investigated industrial area is likely to have caused the increased exposure for children living in Pantelimon.

Recommendations and perspectives

In high-concern areas, such as found in populated areas, further measures have to be taken to avoid health risks for people living in these areas. The measures already taken to reduce emissions from the industrial site will help to avoid further increases in heavy metal concentrations. In areas with exceeded action limits, measures have to be taken as required by law. Detailed risk assessments could help to take necessary actions to protect public health in this area. The public should be informed about the potential hazards of eating plants grown in that area. Educational programs for schools, informing children about the contamination, should lead to a better understanding of environmental problems and a more sustainable behavior in the future.

     

Aryl hydrocarbon receptor-mediated activity of atmospheric particulate matter from an urban and a rural site in Switzerland

Atmospheric particulate matter (PM) is an air-suspended mixture of solid and liquid particles that vary in size, shape, and chemical composition. Long-term exposure to elevated concentrations of fine atmospheric particles is considered to pose a health threat to humans and animals. In this context, it has been hypothesized that toxic chemicals such as polycyclic aromatic hydrocarbons (PAHs) play an important role. Some PAHs are known to be carcinogenic and it has been shown that carcinogenic effects of PAHs are mediated by the aryl hydrocarbon receptor (AhR). In this study, PM1 was collected at a rural and an urban traffic site during an intense winter smog period, in which concentration of PM1 often exceeded 50 μg m^?3. We applied an in vitro reporter gene assay (DR-CALUX) to detect and quantify PM1-associated chemicals that induce AhR-mediated gene expression. This activity was expressed as CALUX equivalents of 2,3,7,8-tetrachlorodibenzodioxin (PM-TCDD-CEQs). In addition, concentrations of PAHs in the PM1 extracts were determined using gas chromatography/high-resolution mass spectrometry. Concentrations of PM-TCDD-CEQs ranged from 10 to 85 pg m^?3 and from 19 to 87 pg m^?3 at the urban and rural site, respectively. By the use of known relative potency factors, the measured concentration of a PAH was converted into a PAH-TCDD-CEQ concentration. ΣPAH-TCDD-CEQ and PM-TCDD-CEQ were highly correlated at both sites (r² = 0.90 and 0.69). The calculated ΣPAH-TCDD-CEQs explain between 2% and 20% of the measured PM-TCDD-CEQs. Benzo[k]fluoranthene was the most important PAH causing approximately 60% of the total ΣPAH-TCDD-CEQ activity. In contrast to NO, CO, PM10, and PM1, the concentration of PM-TCDD-CEQs showed no significant difference between the two sites. No indications were found that road traffic emissions caused elevated concentrations of PM-TCDD-CEQs at the urban traffic site.     

MnFe2O4 nanoparticles as new catalyst for oxidative degradation of phenol by peroxydisulfate

Manganese ferrite nanopowder was prepared by thermal decomposition at 400°C of the gel synthesized from manganese and iron nitrates and polyvinyl alcohol. X-ray diffractometry evidenced that manganese ferrite was formed as single crystalline phase at this temperature. Scanning electron microscope images evidenced the formation of very fine spherical particles(d 11 nm) of manganese ferrite, with specific surface area of 147 m~2/g.The powder obtained at 400°C was used as a catalyst for the oxidative degradation of phenol in aqueous solutions, in the presence of potassium peroxydisulfate as oxidant. High phenol removal efficiencies above 90% were reached at: pH 3–3.5, phenol initial concentration around 50 mg/L, peroxydisulfate:phenol mass ratio 10:1, and catalyst dose 3 g/L. Total organic carbon measurements showed that the degradation of phenol goes, under these conditions, to mineralization in an extent of 60%.     

Metal passivity as mechanism of metal carcinogenesis: Chromium,nickel, iron,copper, cobalt,platinum, molybdenum

For the transition metals chromium, nickel, iron, copper, cobalt, platinum, and molybdenum, mechanisms of stable bonding in biochemistry (emphasis on carcinogenic mechanisms), chemistry, industrial chemistry, as well as epidemiological, occupational, orthopedic (implant devices) effects related to carcinogenesis, were reviewed. Hypothetically, the propensity to stable bonding (inertness), which ensures the metals’ performance capacity for consumers and industrial application, relates to their carcinogenicity. For chromium, a relationship between industrial/chemical and biological reactivity was noted for the tendency of Cr(III) ions to cause hydrolysis previous to stable bonding, as occurs during anodic passivation, leather tanning, and as indicated in biochemical studies pertaining to a mechanism of DNA condensation, which was suggested as a carcinogenic mechanism. The involvement of metal hydrolysis in both anodic passivation and biochemistry was noted also for nickel, iron, and platinum; the DNA interaction of platinum (cis-platin) is known to depend on hydrolysis. For nickel, issues of potential (V) were found important in both passivation and carcinogenicity. Comparably, the passivity behavior of cobalt and copper was found atypical, and their carcinogenicity yet unclear. Molybdenum, contained in passivated metallic implants, may relate to implant-associated carcinogenesis. Occupational carcinogenic effects were indicated for chromium, nickel, iron, and cobalt as caused by both reactive and passivated metal species. Exposure to acids and chronic respiratory irritation/infection/inflammation in workers were important cofactors in metal carcinogenesis. For wood and leather workers exposed to dust, the assumed presence in dust of metal particles abraded from alloys (sawing or cutting blades) may be a carcinogenic exposure hazard.     

Novel Environmentally Friendly Copolymers Carboxymethyl Starch Grafted Poly(Lactic Acid)

Modified natural polymers have been gaining increasing scientific interest for many years. In this study carboxymethyl starch (CMS) was grafted with L(+)-lactic acid (LA) in different molar ratios CMS/LA (1/36, 1/22 and 1/12), resulting carboxymethyl starch-g-poly(lactic acid) (CMS-g-PLA) copolymers. The grafting reaction was carried out by solution polycondensation procedure in toluene and stannous 2-ethyl hexanoate Sn(Oct)₂ as catalyst was utilized. Poly(lactic acid) (PLA) was synthesized in the same conditions with the copolymers for comparative analyses of the physico-chemical and thermal properties. The copolymers and PLA were structurally and morphologically characterized by FT-IR, ¹H-NMR spectroscopy, WAXD and SEM analyses, taking CMS as reference. The molecular weight of the copolymers, CMS and PLA were determined, using a dynamic light scattering technique. The thermal behavior of the products was studied by DSC and TG-DTG analyses. The CMS-g-PLA graft copolymers exhibited lower Tg and thermal stability than pure CMS.