Environmental mutagenicity and toxicity caused by sodium metabisulfite in sea shrimp harvesting in Piauí, Brazil

Sodium metabisulfite is used in marine shrimp harvesting to prevent the occurrence of black spots. Shrimps are soaked in a sodium metabisulfite solution in ice, which is disposed of in sewages that run into marine canals, creating an environmental hazard. This study evaluates the toxicity and mutagenicity caused by sodium metabisulfite in sea waters and sediments collected in a shrimp farm in Cajueiro da Praia (Luis Correia), state of Piauí, Brazil, using the Allium cepa assay. Water and sediment samples were collected in the dry and in the rainy seasons, in three sites: upstream the shrimp farm (Site 1), at the point sodium metabisulfite is discharged (Site 2), and 100 m downstream the farm (Site 3). Three sample dilutions were used (50%, 25% and 10%) for all samples. A negative control (well water) and a positive control (copper sulfate 0.0006 mg mL⁻¹) were used in each experiment. At the end of the 72-h exposure period, onion roots were measured and removed. Mutagenicity analysis included the determination of mitotic index, chromosomal aberrations and the detection of micronuclei; analysis of root size and mitotic index were used as an index of toxicity. The A. cepa assay revealed that the water and sediments samples collected in the Piauí coast contaminated with sodium metabisulfite induce toxicity. The results demonstrate that the assay may be used as a regular tool in the analysis of water parameters in shrimp farms in the coast of Piauí state, and in strategies to preserve the region’s marine ecosystem.     

Kinetic Behavior in Melt State and Solid State Polymerization of Lactide Using Magnesium Stearate as Catalyst

Solid state polymerizations (SSP) and the kinetic behavior in melt state of l-lactide polymerizations employing magnesium stearate as catalyst were investigated. The solid state polymerizations were carried out in two steps where pre-polymers were first prepared in melt polymerizations at 180 °C and the subsequent post-polymerizations were performed around the Tc of polylactide (PLA). In order to find the initial SSP conditions, kinetic profiles of melt polymerizations of l-lactide with magnesium stearate were determined. According to the kinetics data the melt polymerizations were found to be first order with respect to lactide as evident from a linear relationship of logarithmic variations of l-lactide concentration versus time using catalyst/monomer ratios of 1:500 and 1:5,000. When the catalyst content is increased to 1:100 the relationship loses its linearity due to fast propagation in the early stages of the reaction. From the GPC data it can be noted that the molecular weight of PLA can be increased by 5–17 times under the conditions established for our SSP experiments. A comparison between the two step solid state polymerizations and already reported melt polymerizations using the same catalyst showed that SSP furnished polymers with much lower amount of polymer degradation.     

Atrazine degradation in a containerized rhizosphere system

Abstract

The effect of atrazine (2‐chloro‐4‐ethylamino‐6‐isopropylamino‐s‐triazine) on rhizosphere microorganisms and its fate in a containerized rhizosphere system was studied. The rhizosphere system consisted of corn grown in pot containing a defined potting mix of sand and bark with atrazine. Sterilized potting mix and a container without plants served as controls. Atrazine was extracted and analyzed via HPLC. Fluorescent pseudomonad populations increased 100‐fold in the rhizposphere during a 60‐day incubation period as compared to the nonvegetated control. Atrazine degradation was higher in the rhizosphere system (half‐life of 7 days) compared to the nonvegetated control (half‐life of greater than 45 days). The major degradation product detected in the rhizosphere system was deisopropylatrazine; other products detected included deethylatrazine, deethylhydroxyatrazine, deisopropylatrazine and hydroxyatrazine. Hydroxyatrazine was detected in the nonvegetated and sterile controls. The containerized rhizosphere system provides an experimental system to study the fate of pesticidal chemicals as well as the effects on microbial populations.     

Levels of organochlorine pesticides in Amazon turtle (Podocnemis unifilis) in the Xingu River,Brazil

Abstract

Due to the toxicity and high environmental persistence of organochlorine pesticides in aquatic organisms, turtles have been studied as environment biomonitors. These animals are important sources of protein for the riverside and indigenous peoples of the Brazilian amazon. In the present study, organochlorine pesticide contamination was investigated in Podocnemis unifilis. Liver, muscle and fatty tissue samples were removed from 50 specimens collected from five sampling points located in the Xingu River basin. Fourteen organochlorine pesticides were analysed via gas chromatography with an electron capture detector (CG-ECD). Eight organochlorine pesticides were detected with average concentrations of ∑DDT, ∑Endossulfan and ∑HCH which were 26.17?±?26.35, 14.38?±?23.77 and 1.39?±?8.46?ng g^?1 in moisture content, respectively. DDT compounds were the most predominant, with a greater concentration of pp′-DDT in the liver and pp′-DDD in the muscle. Significant differences were noted between the types of tissues studied, and the concentration of OCPs varied between sampling sites.     

Degradation of ethylenethiourea pesticide metabolite from water by photocatalytic processes

In this study, photocatalytic (photo-Fenton and H₂O₂/UV) and dark Fenton processes were used to remove ethylenethiourea (ETU) from water. The experiments were conducted in a photo-reactor with an 80 W mercury vapor lamp. The mineralization of ETU was determined by total organic carbon analysis, and ETU degradation was qualitatively monitored by the reduction of UV absorbance at 232 nm. A higher mineralization efficiency was obtained by using the photo-peroxidation process (UV/H₂O₂). Approximately 77% of ETU was mineralized within 120 min of the reaction using [H₂O₂]₀ = 400 mg L^?1. The photo-Fenton process mineralized 70% of the ETU with [H₂O₂]₀ = 800 mg L^?1 and [Fe²⁺] = 400 mg L^?1, and there is evidence that hydrogen peroxide was the limiting reagent in the reaction because it was rapidly consumed. Moreover, increasing the concentration of H₂O₂ from 800 mg L^?1 to 1200 mg L^?1 did not enhance the degradation of ETU. Kinetics studies revealed that the pseudo-second-order model best fit the experimental conditions. The k values for the UV/H₂O₂ and photo-Fenton processes were determined to be 6.2 × 10^?4 mg L^?1 min^?1 and 7.7 × 10^?4 mg L^?1 min^?1, respectively. The mineralization of ETU in the absence of hydrogen peroxide has led to the conclusion that ETU transformation products are susceptible to photolysis by UV light. These are promising results for further research. The processes that were investigated can be used to remove pesticide metabolites from drinking water sources and wastewater in developing countries.     

Antineoplastic drugs contamination of workplace surfaces in two Portuguese hospitals

Despite the classification as known or suspected human carcinogens, by the International Agency for Research on Cancer, the antineoplastic drugs are extensively used in cancer treatment due to their specificity and efficacy. As human carcinogens, these drugs represent a serious threat to the healthcare workers involved in their preparation and administration. This work aims to contribute to better characterize the occupational exposure of healthcare professionals to antineoplastic drugs, by assessing workplace surfaces contamination of pharmacy and administration units of two Portuguese hospitals. Surface contamination was assessed by the determination of cyclophosphamide, 5-fluorouracil, and paclitaxel. These three drugs were used as surrogate markers for surfaces contamination by cytotoxic drugs. Wipe samples were taken and analyzed by HPLC-DAD. From the total of 327 analyzed samples, in 121 (37 %) was possible to detect and quantify at least one drug. Additionally, 28 samples (8.6 %) indicate contamination by more than one antineoplastic drug, mainly in the administration unit, in both hospitals. Considering the findings in both hospitals, specific measures should be taken, particularly those related with the promotion of good practices and safety procedures and also routine monitoring of surfaces contamination in order to guarantee the appliance of safety measures.     

Assessing heavy metal pollution using Great Tits (Parus major): feathers and excrements from nestlings and adults

Passerine species have been increasingly used as bioindicators of metal bioaccumulation especially by taking benefit of non-invasive procedures, such as collecting feathers and excrements. In 2009, metal (As, Cd, Cu, Hg, Ni, Pb, Se and Zn) concentrations were determined in feathers and excrements of nestling and adult female great tits (Parus major) in industrial (a paper mill) and rural sites in maritime pine forests on the west coast of Portugal. The aim of this study was to compare the levels of metals between the areas but also between sampling methods (feather vs. excrement) and age classes (nestling vs. adult). Although excrements and feathers of nestling great tits showed different concentrations, similar patterns of accumulation were detected in both study areas. There was a significantly higher concentration of mercury in the industrial area and significantly higher concentrations of arsenic in the rural area in both sample types. Metal levels in adult females had quite different results when compared to nestlings, and only nickel presented significantly higher levels near the paper mill. Since metal levels showed a consistent pattern in feathers and excrements of nestling great tits, we conclude that both represent good and non-invasive methods for the evaluation of these elements in polluted areas.