Biophysical and monetary quantification of ecosystem services in a mountain region: the case of avoided soil erosion

Environment, Development and Sustainability - Even though ecosystem services have a significant contribution to human well-being, their value is not always recognized. Despite difficulties, the...     

Removal of Hg2+ ions by adsorption using (TiO2@MnO2)-NPs nanocomposite

Journal of Material Cycles and Waste Management - Waste water contaminated with inorganic mercury is considered a serious environmental problem, mainly due to the hazardous effects this contaminant...     

Determination of toxic metals in leather by wavelength dispersive X-ray fluorescence (WDXRF) and inductively coupled plasma optical emission spectrometry (ICP OES) with emphasis on chromium

The tanning industry is one of the largest environmental polluters due to high generation waste in all production processes, but the tanning is particularly worrisome due to the use of significant amounts of chromium. Cr is an element potentially toxic to both health and the environment, depending on the concentration and the oxidation state. Cr(VI) can come in contact with human skin when using leather goods, which can cause allergies and dermatitis, besides being carcinogenic. Considering that approximately 90% of the world production of leather is performed with Cr salts, the determination of this element in leather is necessary to avoid exposure to the risks that the element can provide. The main goal of this study was the development of an alternative analytical method for the determination of Cr in leathers (ovine and bovine leather tanned with Cr and vegetable tannin) using wavelength dispersive X-ray fluorescence (WDXRF) for direct solid analysis. Besides performing analysis of the chemical composition and determination of Al, As, Ba, Ca, Cd, Cr, Cu, Fe, Mg, Ni, Pb, Sb, Sr, Ti, and Zn in leather by inductively coupled plasma optical emission spectrometry (ICP OES). Principal component analysis (PCA) was also used in the evaluation of the WDXRF and ICP OES data sets. WDXRF calibration models for Cr presented satisfactory figures of merit and the analysis of the leathers revealed an alarming concentration of total Cr in the samples reaching 21,353 mg kg^?1.     

Management of sludge from fish ponds at the edge of the Itaparica Reservoir (Brazil): an alternative to improve agricultural production

Sludge generated in intensively managed tilapia fingerling breeding ponds near the Itaparica Dam in the semi-arid Brazilian northeastern region was tested as a soil conditioner to produce lettuce in an effort to mitigate the present environmental impact of the deposition of this sludge, thereby giving it a productive destiny. A greenhouse experiment was performed by mixing the sludge with a Haplic Planosol topsoil, a characteristic soil of the region, so that the sludge corresponded to 0, 25, 50, 75, and 100% of the mixture (substrate). The experiment was set up as a randomized block design with five blocks, each with three pots (5-kg substrate per pot) of the five sludge proportion treatments. One lettuce plant was transplanted into each pot, maintained under greenhouse conditions, and harvested 35 days after transplanting. Sludge, soil, and the substrates were evaluated for nutrient concentration and physical characteristics. Green and dry weights, stem diameter, and nitrogen, phosphorus, and potassium concentrations in the aboveground parts of the lettuce plants were determined. Sludge incorporation into the substrate improved its chemical and physical characteristics. The lettuce plants grew best in the substrate with 75% sludge, increasing its biomass production by 50% and more than doubling its nitrogen uptake.     

Effects of insecticides used in strawberries on stingless bees Melipona quadrifasciata and Tetragonisca fiebrigi (Hymenoptera: Apidae)

Environmental Science and Pollution Research - The use of pesticides is considered one of the most important threats to pollinators, especially since they are widely used in agriculture for pest...     

Sources of potentially toxic elements and organic pollutants in an urban area subjected to an industrial impact

Urban and industrial development has caused a major impact on environmental soil quality. This work assesses the extent and severity of contamination in a small urban area subjected to an industrial impact and identifies the major anthropogenic inputs. Twenty-six soil samples were collected from agricultural and urban sites, and concentrations of potentially toxic elements (As, Cd, Cu, Cr, Fe, Mn, Ni, Pb and Zn), PAHs and PCBs, were determined. In spite of the low median concentrations observed, some sites represent a potential hazard for human health and ecosystems. Concentrations of contaminants were higher than those found in a nearby city, indicating that the study area is affected by the surrounding industry. The use of multivariate statistical analyses allowed for the identification of the main factors controlling the variability of potentially toxic elements and organic pollutants in the soils. The presence of Cr, Fe, Mn and Ni was associated with geogenic inputs, and Cu, Pb, Zn, As, PAHs and PCBs were associated with anthropogenic inputs. Industry and traffic were the most important anthropogenic sources. Soil characteristics were identified as important factors controlling the spatial variability of elements, both from recognised natural and anthropogenic origin. Differences between land uses were observed, which may be attributed to both management practices and proximity to sources.     

Antineoplastic drugs contamination of workplace surfaces in two Portuguese hospitals

Despite the classification as known or suspected human carcinogens, by the International Agency for Research on Cancer, the antineoplastic drugs are extensively used in cancer treatment due to their specificity and efficacy. As human carcinogens, these drugs represent a serious threat to the healthcare workers involved in their preparation and administration. This work aims to contribute to better characterize the occupational exposure of healthcare professionals to antineoplastic drugs, by assessing workplace surfaces contamination of pharmacy and administration units of two Portuguese hospitals. Surface contamination was assessed by the determination of cyclophosphamide, 5-fluorouracil, and paclitaxel. These three drugs were used as surrogate markers for surfaces contamination by cytotoxic drugs. Wipe samples were taken and analyzed by HPLC-DAD. From the total of 327 analyzed samples, in 121 (37 %) was possible to detect and quantify at least one drug. Additionally, 28 samples (8.6 %) indicate contamination by more than one antineoplastic drug, mainly in the administration unit, in both hospitals. Considering the findings in both hospitals, specific measures should be taken, particularly those related with the promotion of good practices and safety procedures and also routine monitoring of surfaces contamination in order to guarantee the appliance of safety measures.     

A Simplified Dynamic Model for the Activated Sludge Process with High Strength Wastewaters

A simplified dynamic model for the activated sludge process with high-strength wastewaters is presented. The model is based on activated sludge models and predicts effluent chemical oxygen demand concentration using only four parameters. Experimental data for testing the model were obtained in an activated sludge plant using flax retting wastewater. The proposal of the model is described: mass balance to the system, selection of variables and behaviour of the theoretical values versus experimental results.     

Assessing heavy metal pollution using Great Tits (Parus major): feathers and excrements from nestlings and adults

Passerine species have been increasingly used as bioindicators of metal bioaccumulation especially by taking benefit of non-invasive procedures, such as collecting feathers and excrements. In 2009, metal (As, Cd, Cu, Hg, Ni, Pb, Se and Zn) concentrations were determined in feathers and excrements of nestling and adult female great tits (Parus major) in industrial (a paper mill) and rural sites in maritime pine forests on the west coast of Portugal. The aim of this study was to compare the levels of metals between the areas but also between sampling methods (feather vs. excrement) and age classes (nestling vs. adult). Although excrements and feathers of nestling great tits showed different concentrations, similar patterns of accumulation were detected in both study areas. There was a significantly higher concentration of mercury in the industrial area and significantly higher concentrations of arsenic in the rural area in both sample types. Metal levels in adult females had quite different results when compared to nestlings, and only nickel presented significantly higher levels near the paper mill. Since metal levels showed a consistent pattern in feathers and excrements of nestling great tits, we conclude that both represent good and non-invasive methods for the evaluation of these elements in polluted areas.