Ontogeny of osmoregulation in the European sea bass Dicentrarchus labrax L.

 Under natural conditions, sea bass eggs hatch in the open sea and young-of-the-year sea bass are found close to estuaries and enter brackish and even freshwater lagoons in the Mediterranean and the eastern Atlantic. The ontogeny of osmoregulation in the European sea bass, Dicentrarchus labrax (Linnaeus, 1758), was studied in different developmental stages, from hatching to large juveniles, exposed to a range of salinities at 17 °C. The experiments were carried out from March to August 1998 in southern France. The type of hyper-hypo-osmotic regulation did not change during development. All stages hyper-regulated at low salinity (under 10–11‰) and hypo-regulated at higher salinities. The acquisition of the full ability to hypo-regulate occurred in four steps. Osmoregulatory capacity was size- and age-dependent and reached its maximum for fish 17–26 mm long, 63–86 days after hatching. The iso-osmotic salinity was 10.2–11.6‰. Our results suggest that early development of osmoregulatory ability, and thus of salinity tolerance in sea bass, may provide an advantageous flexibility for the timing of migration towards low-salinity habitats. Received: 22 May 2000 / Accepted: 18 December 2000     

Colonization of meiobenthos in oil-contaminated subtidal sands in the lower Chesapeake Bay

In-situ manipulative experiments were conducted over a 3-month period (May–August 1980) to examine the rate at which meiobenthos colonizes oiled and untreated azoic fine sands at a shallow subtidal site in the lower York River, Virginia. Three concentrations of fresh Prudhoe Bay crude oil were added to sediments: 100, 2 500 and 10000 mg oil kg^-1 dry wt sediment. Untreated azoic and natural sediments served as controls. Within 16 d, meiofauna densities in all treatments were comparable to natural populations in surface oxidized sediments, but densities fluctuated greatly during the remainder of the sampling period. Nematodes slowly colonized the subsurface anoxic sediments below the redox potential discontinuity (RPD); some less common species did not significantly recover below the RPD in the two more heavily oiled treatments. Analysis of nematode community composition by reciprocal averaging ordination and numerical classification revealed generally lower abundances, but no distinct differences, in species composition in the oiled substrates as compared to untreated and natural community controls. Ordination of sequential samples suggested that the nematode species assemblages in the untreated controls fully recovered from these small-scale disturbances by 90 d. Life history characteritics and frequent tidal transport combine to make estuarine meiobenthos highly resilient following disturbance. Contrary to prior recolonization studies, a successional sequence was found for the colonizing nematodes which may be analogous to models of macrobenthic colonization (e.g. McCall, 1975). The comesomatid nematode Sabatieria pulchra, which is frequently dominant in polluted sediments, colonized relatively late in the experiment. Consequently, stress resistance and resilience may not be as coincident in meiofauna as in macrofauna because of differences in factors affecting their dispersal.     

The role of soil and active ingredient properties in degradation of pesticides: A preliminary assessment

Pesticide disappearance from soils was observed in laboratory studies in which leaching and runoff were impeded, and volatilisation and degradation evaluated. Advection by volatilisation was negligible for the less volatile chemicals, and significant for the more volatile (Trifluralin and Heptachlor). Basic statistics applied to degradation DT50 data of 14 active ingredients in four different soils showed that the properties of pesticides play a major role in determining their degradability.     

Effect of informal recycling on waste collection and transportation: the case of Chiclayo city in Peru

This paper analyses the evolution of national solid waste policy in Peru and the increasing relevance of informal recycling. Despite this rise in relevance, source separation and incorporation of informal recyclers within municipal plans is still slow, and collection of mixed waste is being considered. Waste collection and transportation costs represent the main share in municipal budgets and this research calculates cost reductions as a result of informal recycling and waste picking. The city of Chiclayo in Peru is presented as a case study. The paper finds that so far, waste picking has resulted in a reduction of two collection rounds but not a reduction in the number of vehicles collecting waste. Looking to the future, recovery of the remaining materials will not have an effect on collection rounds and number of vehicles. The research concludes that synergy between municipal systems and informal recycling can be maximized if new operational conditions are implemented. It introduces the concepts of “critical work shift,” which is the time of the day when the system requires maximum quantity of resources (i.e. vehicle-hours), and “sensitivity to variations in waste amounts,” and proposes strategies to promote recycling based on these new operational concepts.     

Ethical issues concerning potential global climate change on food production

Burning fossil fuel in the North American continent contributes more to the CO₂ global warming problem than in any other continent. The resulting climate changes are expected to alter food production. The overall changes in temperature, moisture, carbon dioxide, insect pests, plant pathogens, and weeds associated with global warming are projected to reduce food production in North America. However, in Africa, the projected slight rise in rainfall is encouraging, especially since Africa already suffers from severe shortages of rainfall. For all regions, a reduction in fossil fuel burning is vital. Adoption of sound ecological resource management, especially soil and water conservation and the prevention of deforestation, is important. Together, these steps will benefit agriculture, the environment, farmers, and society as a whole.     

Analysis of the relation between the cellulose,hemicellulose and lignin content and the thermal behavior of residual biomass from olive trees

The heterogeneity of biomass makes it difficult if not impossible to make sweeping generalizations concerning thermochemical treatment systems and the optimal equipment to be used in them. Chemical differences in the structural components of the biomass (cellulose, hemicellulose, and lignin) have a direct impact on its chemical reactivity. The aim of this research was to study the influence of the organic components of the raw material from olive trees (leaves, pruning residues, and wood) in the combustion behavior of this biomass, as well as to find the component responsible for the higher ash content of olive leaves. Accordingly, the study used a thermogravimetric analyzer to monitor the different states and complex transitions that occurred in the biomass as the temperature varied. The decomposition rates of the different samples were analyzed in order to establish a link between each combustion phase and the composition of the raw materials. Two methods were used to determine the hemicellulose and cellulose contents of biomass from olive trees. Significant differences among the results obtained by the different methods were observed, as well as important variations regarding the chemical composition and consequently the thermal behavior of the raw materials tested.     

A review of approaches for classifying benthic habitats and evaluating habitat quality

We have assessed the current state of knowledge relative to methods used in assessing sub-tidal benthic habitat quality and the classification of benthic habitats. While our main focus is on marine habitat, we extensively draw on knowledge gained in freshwater systems where benthic assessment procedures are at an advanced stage of maturity. We found a broad range of sophistication/complication in terms of the methods applied in assessing and mapping benthic habitats. The simplest index or metric involved some assessment of species richness, while the most complicated required utilizing multi-variate analysis. The simplest mapping attempts equated physical substrate with benthic habitat while the most sophisticated relied on extensive environmental preference and groundtruth data for species of concern. The leading edge of methods for benthic habitat mapping involves combining the advances in optical and acoustic methods that allow for routine classifying and mapping of the seafloor with biological and habitat data for species of concern. The objective of this melding of dispirit methods is to produce benthic habitat maps with broad system wide coverage and sound biological underpinning. It is clear that the disparity in information density between the physical and biological sides of the equation currently hinder applicability and acceptability of benthic habitat mapping efforts. In addition to the lack of basic information on the biological and environmental tolerances of targeted species, the proliferation of metrics for characterizing and assessing biological conditions further clouds the usefulness of any broad scale mapping attempt. The problem of data density mismatch between physical and biological methods will likely not be solved until acoustic methods can routinely resolve the elusive biological components that make a physical substrate a habitat.     

Two-phase anaerobic digestion within a solid waste/wastewater integrated management system

A two-phase, wet anaerobic digestion process was tested at laboratory scale using mechanically pre-treated municipal solid waste (MSW) as the substrate. The proposed process scheme differs from others due to the integration of the MSW and wastewater treatment cycles, which makes it possible to avoid the recirculation of process effluent. The results obtained show that the supplying of facultative biomass, drawn from the wastewater aeration tank, to the solid waste acidogenic reactor allows an improvement of the performance of the first phase of the process which is positively reflected on the second one. The proposed process performed successfully, adopting mesophilic conditions and a relatively short hydraulic retention time in the methanogenic reactor, as well as high values of organic loading rate. Significant VS removal efficiency and biogas production were achieved. Moreover, the methanogenic reactor quickly reached optimal conditions for a stable methanogenic phase. Studies conducted elsewhere also confirm the feasibility of integrating the treatment of the organic fraction of MSW with that of wastewater.     

Characteristics of healthcare wastes

A comprehensive understanding of the quantities and characteristics of the material that needs to be managed is one of the most basic steps in the development of a plan for solid waste management. In this case, the material under consideration is the solid waste generated in healthcare facilities, also known as healthcare waste. Unfortunately, limited reliable information is available in the open literature on the quantities and characteristics of the various types of wastes that are generated in healthcare facilities. Thus, sound management of these wastes, particularly in developing countries, often is problematic. This article provides information on the quantities and properties of healthcare wastes in various types of facilities located in developing countries, as well as in some industrialized countries. Most of the information has been obtained from the open literature, although some information has been collected by the authors and from reports available to the authors. Only data collected within approximately the last 15 years and using prescribed methodologies are presented. The range of hospital waste generation (both infectious and mixed solid waste fractions) varies from 0.016 to 3.23kg/bed-day. The relatively wide variation is due to the fact that some of the facilities surveyed in Ulaanbaatar include out-patient services and district health clinics; these facilities essentially provide very basic services and thus the quantities of waste generated are relatively small. On the other hand, the reported amount of infectious (clinical, yellow bag) waste varied from 0.01 to 0.65kg/bed-day. The characteristics of the components of healthcare wastes, such as the bulk density and the calorific value, have substantial variability. This literature review and the associated attempt at a comparative analysis point to the need for worldwide consensus on the terms and characteristics that describe wastes from healthcare facilities. Such a consensus would greatly facilitate comparative analyses among different facilities, studies and countries.