Dystrophin protein and rflp analyis for fetal diagnosis and carrier confirmation of duchenne muscular dystrophy

A pregnant woman with indeterminate Duchenne muscular dystrophy (DMD) carrier status, but with DMD diagnosed in her deceased brother (unavailable for study), presented for prenatal diagnosis, intending to continue the pregnancy only if proven unaffected with DMD with near absolute certainty. Creatine kinase (CK) assays to clarify carrier status were inconclusive. Male sex in the fetus was identified, but DNA restriction fragment length polymorphism (RFLP) analysis was not yet available to this centre to investigate the possible transmission of the DMD gene, and the pregnancy was terminated. Tissue histology and dystrophin protein analysis demonstrated the absence of DMD. In a situation with proven maternal carrier status, future fetal inheritance of the opposite maternal X chromosome would indicate the presence of DMD. However, maternal carrier status remained in doubt through a second pregnancy, even with RFLP studies, and was finally established when dystrophin analysis confirmed the presence of DMD in the second fetus. Histologic findings are presented, contrasting features in the two fetuses. The value of dystrophin analysis for establishing the diagnosis of fetal DMD, in this case proving maternal carrier status in a difficult situation, and for demonstrating DMD gene:RFLP haplotype relationships is illustrated.     

Forecasting Air Pollution Potential: A Synoptic Climatological Approach

ABSTRACT

This paper describes the development and application of an air pollution potential (APP) forecast model based on a synoptic climatological approach in a heavily industrialized area in Durban, South Africa. The aim of the forecasting procedure, based on a system of orange, red, and all-clear alerts, was to give industry advance warning of periods of poor atmospheric dispersion so that it could take action to reduce emissions. The key meteorological parameter in accurately identifying the commencement of an APP episode was found to be negative surface pressure tendency. Wind direction was the most useful parameter in estimating the end point of an APP episode. The model was very successful in identifying periods of elevated SO₂, but there is a need for further refinement in forecasting the end point of an episode.     

Black Carbon Aerosol at McMurdo Station,Antarctica

ABSTRACT

Aerosol light absorption as black carbon (BC) was measured from November 19, 1995, to February 6, 1996, at a location 0.65 km downwind of the center of McMurdo Station on the Antarctic coast. The results show a bimo-dal frequency distribution of BC concentrations. Approximately 65% of the measurements were found in a mode at a low range of concentrations centered at ~20 ng/m³. These concentrations are higher than those found at other remote Antarctic locations and probably represent contamination from the station. The remaining measurements were in a high-concentration mode (BC ~300 ng/m³), indicating direct impact of local emissions from combustion activities at the station. High values of BC were associated with winds from the direction of the station, and the BC flux showed a clear directionality. Maximum BC concentrations occurred between 7:00 and 11:00 a.m. The "polluted" mode accounted for more than 80% of the BC frequency-weighted impact at this location.     

Identification of Selected Hormonally Active Agents and Animal Mammary Carcinogens in Commercial and Residential Air and Dust Samples

ABSTRACT

In order to characterize typical indoor exposures to chemicals of interest for research on breast cancer and other hormonally mediated health outcomes, methods were developed to analyze air and dust for target compounds that have been identified as animal mammary carcinogens or hormonally active agents and that are used in commercial or consumer products or building materials. These methods were applied to a small number of residential and commercial environments to begin to characterize the extent of exposure to these classes of compounds. Phenolic compounds, including nonylphenol, octylphenol, bisphenol A, and the methoxychlor metabolite 2,2-bis (p-hydroxyphenyl)-1,1,1-trichloroethane (HPTE), were extracted, derivatized, and analyzed by gas chromatography/mass spectrometry (GC/MS)–selective ion monitoring (SIM). Selected phthalates, pesticides, polycyclic aromatic hydrocarbons (PAHs), and polychlorinated biphenyls (PCBs) were extracted and analyzed by GC/MS-SIM. Residential and workplace samples showed detectable levels of twelve pesticides in dust and seven in air samples. Phthalates were abundant in dust (0.3524 μg/g) and air (0.005-2.8 μg/m³). Nonylphenol and its mono- and di-ethoxylates were prevalent in dust (0.82-14 μg/g) along with estrogenic phenols such as bisphenol A and o-phenyl phenol. In this 7-sample pilot study, 33 of 86 target compounds were detected in dust, and 24 of 57 target compounds were detected in air. In a single sample from one home, 27 of the target compounds were detected in dust and 15 in air, providing an indication of chemical mixtures to which humans are typically exposed.     

Variations in the Emissions of Volatile Organic Compounds from the Toner for a Specific Photocopier

ABSTRACT

A laboratory thermal desorption apparatus was used to measure emissions from a number of nominally identical photocopier toners—manufactured to meet the specifications of one specific model copier—when these toners were heated to fuser temperature (180-200 °C). The objective was to assess how potential volatile organic compound (VOC) emissions from the toner for a given copier can vary, depending upon the production run and the supplier. Tests were performed on a series of toner (and associated raw polymer feedstock) samples obtained directly from a toner manufacturer, representing two production runs using a nonvented extrusion process, and on toner cartridges purchased from two local retailers, representing three different production lots (histories unknown). The results showed that the retailer toners consistently had up to 350% higher emissions of some major compounds (expressed as |ig of compound emit-ted/g of toner), and up to 100% lower emissions of others, relative to the manufacturer toners (p ≤ 0.01). The manufacturer toners from one production run had emissions of certain compounds, and of total VOCs, that were modestly higher (13-18%) than those from the other run (p ≤ 0.01). The emission differences between the retailer and manufacturer toners are probably due to differences     

Investigation of the Potential Antimicrobial Efficacy of Sealants Used in HVAC Systems

ABSTRACT

Recent experiments confirm field experience that duct cleaning alone may not provide adequate protection from regrowth of fungal contamination on fiberglass duct liner (FGDL). Current recommendations for remediation of fungally contaminated fiberglass duct materials specify complete removal of the materials. But removal of contaminated materials can be extremely expensive. Therefore, a common practice in the duct-cleaning industry is the postcleaning use of antimicrobial surface coatings with the implication that they may contain or limit regrowth.

Little information is available on the efficacy of these treatments. This paper describes a study to evaluate whether three commercially available antimicrobial coatings, placed on a cleaned surface that 1 year previously had been actively growing microorganisms, would be able to prevent regrowth. The three coatings contained different active antimicrobial compounds. All three of the coatings were designed for use on heating, ventilation, and air conditioning (HVAC) system components or interior surfaces of lined and unlined duct systems. Coating I was a polyacrylate copolymer containing zinc oxide and borates. Coating II was an acrylic coating containing decabromodiphenyl oxide and antimony trioxide. Coating III was an acrylic primer containing a phosphated quaternary amine complex.

The study included field and laboratory assessments. The three treatments were evaluated in an uncontrolled field setting in an actual duct system. The laboratory study broadened the field study to include a range of humidities under controlled conditions. Both static and dynamic chamber laboratory experiments were performed. The results showed that two of the three antimicrobial coatings limited the regrowth of fungal contamination, at least in the short term (the 3-month time span of the study); the third did not. Before use in the field, testing of the efficacy of antimicrobial coatings under realistic use conditions is recommended because antimicrobials have different baseline activities and interact differently with the substrate that contains them and their local environment.     

A 13-Week Comparison of Passive and Continuous Ozone Monitors at Forested Sites in North-Central Pennsylvania

ABSTRACT

Ogawa passive O₃ samplers were used in a 13-week study (June 1-September 1, 1999) involving 11 forested and mountaintop sites in north-central Pennsylvania. Four of the sites were collocated with TECO model 49 O₃ analyzers. A significant correlation (p < 0.0001) was found for 24-hr average weekly O₃ concentrations between the two methodologies at the four sites with collocated monitors. As expected, there were positive relationships between increasing elevation of the sites and increasing O₃ concentrations. No O₃ exposure patterns were found on a west-to-east or south-to-north basis; however, the area known for lower O₃ exposures within a smaller subsection of the study area showed consistently lower O₃ exposures. Preliminary results regarding relationships of symptom responses within O₃-sensitive bioindicators are also presented with black cherry (Prunus serotina, Elirli.) and common milkweed (Asclepias syriaca, L.) showing clear evidence of increasing injury with increasing O₃ exposures. Due to the extremely dry conditions encountered in north-central Pennsylvania during the 1999 growing season, O₃-induced symptoms were sporadic and quite delayed until late-season rains during the latter portion of the observation period.     

An Air Quality Modeling Study Comparing Two Possible Sites for the New International Airport for Mexico City

Abstract

Using an air quality model, two future urban scenarios induced by the construction of the new international airport for Mexico City are compared at a regional level. The air quality model couples the meteorology model MM5 and state-of-the-art photochemistry. The air quality comparison is made using metrics for the criterion gases selected for the study. From the two urban scenarios compared, the option for Tizayuca is moderately better than the option for Texcoco, because relative reductions in O₃ and other photochemical pollutants are achieved over highly populated areas. Regardless of the site, the air quality for the central region of Mexico in the future will deteriorate. In the region of central Mexico, SO₂ and NO₂ will become important pollutants.