Rapid in situ assessment for predicting soil quality using an algae-soaked disc seeding assay

The soil quality of remediated land is altered and this land consequently exerts unexpected biological effects on terrestrial organisms. Therefore, field evaluation of such land should be conducted using biological indicators. Algae are a promising new biological indicator since they are a food source for organisms in higher soil trophic levels and easily sampled from the soil. Field evaluation of soil characteristics is preferred to be testing in laboratory conditions because many biological effects cannot be duplicated during laboratory evaluations. Herein, we describe a convenient and rapid algae-soaked disc seeding assay for assessing soil quality in the field based on soil algae. The collection of algae is easy and rapid and the method predicts the short-term quality of contaminated, remediated, and amended farm and paddy soils. The algae-soaked disc seeding assay is yet to be extensively evaluated, and the method cannot be applied to loamy sand soil in in situ evaluations. The algae-soaked disc seeding assay is recommended for prediction of soil quality in in situ evaluations because it reflects all variations in the environment. The algae-soaked disc seeding assay will help to develop management strategies for in situ evaluation.     

Evaluation of metals in the residue of paper sludge after recovery of pulp components using an ionic liquid

The quantity of sludge produced by the paper industry in Japan in 2011 was estimated to be 27.91 million tons wet weight. This amount is the third largest among all industrial wastes. To explore ways of reusing recovered paper pulp and safely disposing of the residue, we investigated the distribution of metals in the process of recovery of pulp from two types of paper sludge using an ionic liquid. 32 and 46 % of pulp from paper sludge A and B was recovered using ionic liquid, respectively; the resultant weight reduction of the solid mass was comparable to that of incineration. There were virtually no heavy metals but aluminum in the recovered pulp, which makes its reuse viable at present. The characteristics of the metals in the residues differed according to the treatment used and properties of the paper sludge. Copper accounted for ~10 % in the ionic liquid used for recovery of pulp from the paper sludges. This suggests that [bmIm]Cl has the potential to dissolve a specific amount of copper compared to other metals.     

Electron affinity coefficients of nitrogen oxides and biodegradation kinetics in denitrification of contaminated stream water

During the dry season in Korea, rivers become more vulnerable to contamination by biochemical oxygen demand (BOD) and nitrogen. It is hypothesized that the natural characteristics of the streams in Korea allow the contaminated water to be treated at the tributaries. Down-stream river water quality in Korea may be improved by spraying the contaminated stream water from the tributaries over the surrounding floodplains. The consequent water filtration through the soil could remove the contaminants through aerobic and denitrifying reactions. In this study, the kinetics parameters of the denitrifying reaction in floodplain filtration were determined using contaminated stream water. For the electron donor the Monod kinetics was used, while the competitive Michaelis-Menten model was employed for the electron acceptors. The parameters to the competitive Michaelis-Menten model were found using continuous denitrifying reactions, instead of the batch reactions employed in previous studies, to match the conditions needed to apply the competitive Michaelis-Menten kinetics. From the result, it was found that continuous reactions as well as batch reactions could be used to determine the affinity coefficients in denitrification. The results of this study also showed that the affinity coefficient of NO2, using continuous reactions, was similar to that of other studies in the literature found via batch reactions, whereas the affinity coefficient of N2O was much larger than that acquired with batch reactions. The parameters obtained in this study will be used in future work to simulate the contaminant behaviors during floodplain filtration using a mathematical model.     

Transportation noise and exposed population of an urban area in the Republic of Korea

Using noise prediction models, we explored the transportation noise levels of Youngdeungpo-gu, an urbanized area of Seoul Metropolitan City in the Republic of Korea. In addition, we estimated the population exposed to transportation noise levels and determined how many people are vulnerable to noise levels that would cause serious annoyance and sleep disturbance. Compared with the World Health Organization [WHO] recommended levels, the daytime and nighttime transportation noise levels were still high enough to have the two psychosocial effects on people when considering the recommended levels of the World Health Organization (WHO; 55 decibels [dB[A]] and 40 dB[A] for daytime and nighttime, respectively). Particularly, nighttime transportation noise was discovered to be harmful to a wider area and more people than daytime noise. Approximately 91% of the Youngdeungpo-gu area experienced nighttime transportation noise levels exceeding those recommended by WHO. It was estimated that as much as 80% of the people in the study area were exposed to transportation noise levels >40 dB[A] during nighttime. Taking this into account, there is an urgent need to control and reduce transportation noise levels in Seoul, to protect residents against the potential ill health effects caused by urban transportation.     

Asbestos exposure among Seoul metropolitan subway workers during renovation of subway air-conditioning systems

Air quality in underground spaces has seldom been evaluated in Korea. Accordingly, the current study recently evaluated asbestos exposure among Seoul metropolitan subway workers during the renovation of the subway's air-conditioning system. To identify possible routes of asbestos exposure, suspected sources, including gaskets, ceiling boards, ceiling materials, and dust settled inside ducts, were all sampled. Personal air samples were also taken to evaluate any asbestos exposure during the renovation. The asbestos fibers found in the samples were analyzed using a transmission electron microscope (TEM) equipped with an energy dispersive X-ray analyzer (EDX). Twelve out of eighteen bulk samples contained asbestos, the majority of which was chrysotile fibers. Asbestos was detected in 9 out of 72 personal air samples and the level ranged from 0.003 to 0.02 fibers/cm(3). While asbestos levels were below Korean occupational limit of 2 fibers/cm(3), they were still detectable and therefore further monitoring would be appropriate.     

Photodegradation of the endocrine-disrupting chemical 4-nonylphenol in biosolids applied to soil

There is increasing concern about the environmental fate and impact of biosolids-associated anthropogenic organic chemicals, among which 4-nonylphenol (4-NP) is one of the most studied chemicals. This is primarily because 4-NP is an endocrine disruptor and has been frequently detected in environmental samples. Due to its high hydrophobicity, 4-NP has high affinity for biosolids. Land application of 4-NP-containing biosolids could potentially introduce large quantities of this chemical into the environment. A laboratory experiment was conducted to investigate the effect of artificial sunlight on 4-NP degradation in biosolids applied to soil. When exposed to artificial sunlight for 30 d, the top-5-mm layer of biosolids showed a 55% reduction of 4-NP, while less than 15% of the 4-NP was degraded when the biosolids were kept in the dark. Our results indicate that sensitized photolysis reaction plays an important role in reducing the levels of 4-NP in land-applied biosolids. Surface application rather than soil incorporation of biosolids could be effective in reducing biosolids-associated organic chemicals that can be degraded through photolysis reactions. However, the risks of animal ingestion, foliar deposition, and runoff should also be evaluated when biosolids are applied on the soil surface.     

Potential source of asbestos in non-asbestos textile manufacturing company

Recently, a worker with lung carcinoma and a metastatic brain tumor was diagnosed as having a work-related disease. He had been employed in a non-asbestos textile company for 25 years. Consequently, to identify and explore possible causative agents for lung cancer in a non-asbestos textile manufacturing company and establish a causal relationship between exposure and lung cancer, an epidemiological investigative study was conducted and the work processes the worker was engaged in were examined. Air samples were taken from the workplace and during the drilling processes, and a suspected causative material was analyzed. The study revealed that the subject had been employed in the non-asbestos textile manufacturing company for 25 years from 1973 and his responsibilities included repairing spinning machines. In particular, the subject was involved in drilling B-bushings that were used to protect against gear abrasion in the spinning machines. An analysis of the B-bushings using a transmission electron microscope equipped with an energy dispersive X-ray analyzer indicated that they contained crocidolite asbestos fibers. Air samples obtained when drilling the B-bushings clearly indicated that the subject had most likely been exposed to crocidolite fibers when installing the B-bushings in the spinning machines. The frequency and duration of the work suggested that there would be a sufficient degree of exposure to crocidolite fibers to cause lung cancer. Except for smoking and asbestos exposure, no other chemical exposure was suspected for developing lung cancer in the workplace. Smoking appeared to be more of a potentiating risk factor in conjunction with the asbestos exposure. Accordingly, this case may provide significant evidence in identifying the cause of the mesothelioma or lung carcinoma found among workers in non-asbestos textile manufacturing companies elsewhere.     

Sources of productive efficiency: International comparison of iron and steel firms

Using a time-varying stochastic frontier model, this paper examines the technical efficiency of firms in the iron and steel industry to try to identify the factors contributing to the industry's efficiency growth. Industry observers and policymakers tend to cite most frequently three possible sources of efficiency growth: privatization; economies of scale; and vintage of equipment. Our study corroborates these factors. Based on our findings, which pertain to 52 iron and steel firms over the period of 1978–1997, privatization is likely to improve the efficiency of iron and steel firms to a great extent as evidenced in various industries. This study also provides systematic evidence that iron and steel production shows economies of scale. In addition, newer vintages of equipment are found to be closely correlated with higher levels of efficiency. This clearly indicates that investment in new plants and equipments is critical in pursuit of efficiency in the iron and steel industry.     

Adsorptive removal of pollutants from water using magnesium ferrite nanoadsorbent: a promising future material for water purification

Environmental Science and Pollution Research - Nanoadsorbents having large specific surface area, high pore volume with tunable pore size, affordability and easy magnetic separation gained much...     

Sustainable Water Resources Management in a Conflict Resolution Framework1

Abstract: A decision support system for sustainable water resources management in a water conflict resolution framework is developed to identify and evaluate a range of acceptable alternatives for the Geum River Basin in Korea and to facilitate strategies that will result in sustainable water resource management. Working with stakeholders in a “shared vision modeling” framework, sustainable management strategies are created to illustrate system tradeoffs as well as long‐term system planning. A multi‐criterion decision‐making (MCDM) approach using subjective scales is utilized to evaluate the complex water resource allocation and management tradeoffs between stakeholders and system objectives. The procedures used in this study include the development of a “shared vision model,” a simulated decision‐making support system (as a tool for sustainable water management strategies associated with water conflicts, management options, and planning criteria), and the application of MCDM techniques for evaluating alternatives provided by the model. The research results demonstrate the utility of the sustainable water resource management model in aid of MCDM techniques in facilitating flexibility during initial stages of alternative identification and evaluation in a basin suffering from severe water conflicts.