The characteristics of waste Saccharomyces cerevisiae biosorption of arsenic(III)

Purpose

The potential of using waste Saccharomyces cerevisiae as adsorbent for the adsorption of As(III) from aqueous solution was assessed.

Methods

The biosorbent was characterized by Fourier transform infrared (FTIR) spectroscopy analysis. Various parameters including pH, biosorbent dosage, contact time, and temperature were systematically investigated.

Results and conclusions

The FTIR results of S. cerevisiae biomass showed that biomass has different functional groups, and these functional groups are able to react with metal ion in aqueous solution. Several biosorption isotherms were used to fit the equilibrium data, showing sorption to be monolayer on the heterogeneous surface of the biosorbent. The maximum biosorption capacity calculated using Langmuir model was found to be 62.908???g/g at pH?5.0, biosorbent dosage 5?g/L, contact time 240?min, and temperature 35?°C. The kinetic studies indicated that the biosorption process of the As(III) followed well the pseudo-second-order equation. The intraparticle diffusion and Richenberg models were applied to the data, and we found that the biosorption of As(III) was governed by film diffusion followed by intraparticle diffusion. The thermodynamics constants indicated that the biosorption of As(III) onto S. cerevisiae was spontaneous and endothermic under examined conditions. Biosorbent could be regenerated using 0.5?M NaOH solution, with up to 75?% recovery.     

Selective removal of diclofenac from contaminated water using molecularly imprinted polymer microspheres

A molecularly imprinted polymer (MIP) was synthesized by precipitation polymerization using diclofenac (DFC) as a template. Binding characteristics of the MIP were evaluated using equilibrium binding experiments. Compared to the non-imprinted polymer (NIP), the MIP showed an outstanding affinity towards DFC in an aqueous solution with a binding site capacity (Q_max) of 324.8 mg/g and a dissociation constant (K_d) of 3.99 mg/L. The feasibility of removing DFC from natural water by the MIP was demonstrated by using river water spiked with DFC. Effects of pH and humic acid on the selectivity and adsorption capacity of MIP were evaluated in detail. MIP had better selectivity and higher adsorption efficiency for DFC as compared to that of powdered activated carbon (PAC). In addition, MIP reusability was demonstrated for at least 12 repeated cycles without significant loss in performance, which is a definite advantage over single-use activated carbon.     

一种多DTC基团重金属螯合剂的合成及处理含铜废水性能

合成了一种新的二硫代氨基甲酸盐类重金属螯合剂CDTC,并对其处理游离铜离子、EDTA络合铜和柠檬酸络合铜废水的性能进行了研究.实验结果表明:CDTC能直接去除已络合的铜,对不同形态的Cu2+去除率均达99%以上,处理后的废水中Cu2+剩余浓度达到我国<污水综合排放标准>(GB 8978-1996)一级标准;在废水pH=...     

表面活性剂洗脱含油污泥中的机油

采用表面活性剂洗脱法去除含油污泥中的机油,考察了4种表面活性剂对含油污泥的洗脱效果.实验结果表明:当以质量浓度为100 mg/L吐温80为洗脱剂、洗脱时间为4h、洗脱温度为25℃、溶液pH为6时,溶液中油质量浓度最大,为1 293.68 mg/L,此时含油污泥中油的洗脱率为86.25％;无机离子的加入总体上减小了表面活...     

我国太阳能光伏发电产业发展方向及产业政策

随着新世纪的到来,出于对环保和未来能源供应的考虑,可再生能源在世界能源消费中的比重逐渐加大。其中,太阳能光伏发电技术的发展和应用颇为世人所瞩目。本文从国有光伏产品市场特点出发,分析了国产光伏系统在市场竞争中的优势和劣势所在,指出了当前我国太阳能光伏发电系统企业在市场中缺乏竞争力的原因。在此基础上,提出相应的解决方案。     

偶氮染料定量结构-生物降解关系(QSBR)研究

利用量子化学原理剖析了偶氮染料的脱色机制,所得结果与文献中关于染料结构与脱色能力之间关系的结论基本一致,以脱色能力为染料生物降解能力的表征,建立了定量结构生物降解性模型,模型预测结果与实验结果基本吻合。     

卡鲁塞尔氧化沟反应器两相流PIV图像处理研究及实验分析

在单相数字粒子图像测速度(PIV)技术的基础上,研究了PIV两相流动的测试及图像处理方法.利用数学形态学的原理以及互相关法,对两相粒子图像进行标定、识别、区分和流场分析,编辑了相应的软件.并采用此技术对卡鲁塞尔氧化沟模型直道及弯道段二维液固两相流速进行测量,克服了传统点测量方法无法获取全场流动同步信息的缺陷,较好地反映了不同位置处固液流动分布的基本特性.结果表明,沟内径向流速远小于轴向,流速大小相差约一个数量级;同一断面上轴向流动分布是决定水力特性的主要因素;径向流速和水体动能是决定污泥沉积位置的主要因数,固相总体流速小于液相.     

含氮农药的好氧生物降解性能及废水治理对策

从动力学角度出发,利用长期驯化的菌种,对乙草胺,阿特拉津,西草净,赛克津等４种含氮农药的好氧生物降解性能进行了研究,并对含氮农药废水提出了治理对策,结果表明,４种含氮农药的好氧生物降解性能都很差,均属于难生物降解有机物,降解过程均符合一级降解动力学模式,它们的生物降解速率常数分别为０．００３５３Ｌ（ｇ．ｈ）,０．００５７７Ｌ／（ｇ．ｈ）,０．００１６０Ｌ／（ｇ．ｈ）,０。０４５６Ｌ／（ｇ．ｈ）进一     

碳酸铅作为铅酸蓄电池电极材料的研究

采用粉末微电极技术和循环伏安法研究了ＰｂＣＯ３转化为铅酸电池电极活性物质的途径以及几种因素对ＰｂＣＯ３转化的ＰｂＳＯ４／ＰＢ电极性能的影响。ＰｂＣＯ３粉末在Ｈ２ＳＯ４溶液中化学转化－电化学活化后,正、负极的伏这行为与文献报道的类似。结果表明,较高扫速活化的ＰｂＳＯ４／Ｐｂ电极性能稳定且活性较高;转化ＰｂＣＯ３的Ｈ２ＳＯ４浓度０．５￣１．０ｍｏｌ·Ｌ＾－１优于２．５￣５．０ｍｏｌ·Ｌ＾－１,３０℃附     

日光/H2O2/草酸铁体系对垃圾渗滤液深度处理的试验研究

以草酸铁络合物／H2O2作光氧化剂,利用日光对垃圾渗滤生化出水进行了光氧化降解试验。结果表明,在溶液的初始体系pH=3．0,H2O2投加量为460mg／L,Fe^3＋质量浓度为20mg／L条件下,反应60min后,CODCr去除率可达80％以上;溶液初始体系的pH、H2O2和Fe^3＋的投加量及废水的水质对光解过程有显著影响,而且在太阳光照射下,CODCr去除率比紫外光照射下高。研究表明,在一定试验条件下,用日光／H2O2／草酸铁体系对城市垃圾渗滤液处理效果较好,可作为垃圾渗滤液的深度处理。