Fine scale structure of convective mixed layer in ice-covered lake

Environmental Fluid Mechanics - Nonstationary convection forced by distributed buoyancy sources is a fundamental environmental fluid mechanics process, particularly in ice-covered freshwater...     

An investigation into the occurrence and distribution of polycyclic aromatic hydrocarbons in two soil size fractions at a former industrial site in NE England,UK using in situ PFE–GC–MS

Polycyclic aromatic hydrocarbon (PAH) concentrations were determined in 16 topsoils (0–10 cm) collected across the site of a former tar works in NE England. The soils were prepared in the laboratory to two different particle size fractions: <250 μm (fraction A) and >250 μm to <2 mm (fraction B). Sixteen priority PAHs were analysed in the soils using in situ pressurised fluid extraction (PFE) followed by gas chromatography—mass spectrometry (GC–MS). The average total PAH concentration in the soils ranged from 9.0 to 1,404 mg/kg (soil fraction A) and from 6.6 to 872 mg/kg (soil fraction B). These concentrations are high compared with other industrially contaminated soils reported in the international literature, indicating that the tar works warrants further investigation/remediation. A predominance of higher-molecular-weight compounds was determined in the samples, suggesting that the PAHs were of pyrogenic (anthropogenic) origin. Statistical comparison (t-test) of the mean total PAH concentrations in soil fractions A and B indicated that there was a significant difference (95% confidence interval) between the fractions in all but two of the soil samples. Additionally, comparisons of the distributions of individual PAHs (i.e. 16 PAHs × 16 soil samples) in soil fractions A and B demonstrated generally higher PAH concentrations in fraction A (i.e. 65.8% of all individual PAH concentrations were higher in soil fraction A). This is important because fraction A corresponds to the particle size thought to be most important in terms of human contact with soils and potential threats to human health.     

Pesticide pressure and fish farming in barrage pond in northeastern France. Part III: how management can affect pesticide profiles in edible fish?

Purpose

The quality of fish produced in ponds needs to be ensured. Indeed, pond is often strongly connected to an agricultural watershed, and pesticides are a main health and environmental issue of concern. In this context, the purpose of this study is to highlight the management practices which could impact the pesticide contamination profiles in edible fish and to give recommendations for better practices.

Methods

A principal component analysis, coupled to a hierarchical cluster analysis, was performed to evaluate temporal evolution of contamination profiles and to assess variability among fish species and among sites according to watershed characteristics. The explicative variables correspond to muscular concentrations of pesticides (azoxystrobin, clomazone, diflufenican, carbendazim, isoproturon, metazachlor, napropamid) in three species of fish (Perca fluviatilis, Cyprinus carpio and Rutilus rutilus), caught in five ponds during two sampling campaigns. Management data are added variables in order to discuss about parameters suspected to be implicated in the contamination profiles recorded.

Results

This work shows that high amounts of pesticides applied, short crop rotation durations and bare soil practices led to contamination of sediments and fish and were associated to a “bad” management of watershed. Breeding fish that had low masses and establishing the fishing period at the end of winter seemed to be “bad” management of pond. Aggravating topological parameters were big watershed coupled to small pond and high proportions of sand soils in the watershed.

Conclusions

Reducing amounts of pesticide used (e.g. policy agency plans, farmer acceptance), favouring long-term rotations and inter-cultures, adapting pond creation and fish farming practices to watershed management and topography all could reduce pesticide levels in edible fish and contribute to a better sustainability of the extensive fish farming in pond.     

Impact of an exceptional Saharan dust outbreak in France: PM10 and artificial radionuclides concentrations in air and in dust deposit

The present study focuses on the exceptional Saharan dust event that affected most of France in February 2004. Activity levels of various artificial radionuclides (⁹⁰Sr, ¹³⁷Cs, uranium, thorium and plutonium isotopes, ²⁴¹Am) were examined. Activity or isotopic ratios are discussed in the context of atmospheric nuclear weapons tests, among them French tests performed in Sahara in the 1960s. The daily evolution of ¹³⁷Cs activity levels in the atmosphere was compared to daily PM₁₀ change. A link between airborne ¹³⁷Cs and PM₁₀, is given. It is estimated that this 2-day event deposited as much ¹³⁷Cs as would be deposited on average over a 10-month period. The amount of deposited ¹³⁷Cs and ^239+240Pu represents respectively about 0.1 and 1% of the activity already present in the soil. Such Saharan dust events correspond to an extreme type of “feeder” process of artificial radionuclides in the atmosphere. Therefore, they contribute to the long term background level of artificial radionuclides kept at trace levels in the atmosphere.     

Determination of polycyclic aromatic hydrocarbons in urban street dust: implications for human health

The determination of sixteen polycyclic aromatic hydrocarbons in urban street dust has been done. Samples were collected from 12 sampling locations in a city centre location (Newcastle upon Tyne, north east England) and extracted using in situ pressurised fluid extraction followed by gas chromatography mass spectrometry. From the results it was possible to identify three groups, with respect to PAH concentration, with PAH contents ranging between 0.6-2.3 mg kg⁻¹, 15.6-22.5 mg kg⁻¹ and 36.1-46.0 mg kg⁻¹. The total PAH content of samples from these sampling sites has been compared to 22 urban locations around the world; comparable levels were found in these samples compared to the other cities around the world.The potential source of PAHs has been investigated by investigating the proportion of pyrogenic and petrogenic material in urban street dust using specific individual PAH ratios. The results indicate that the PAH content of urban street dust from the chosen sites are more likely to be due to pyrogenic sources i.e. vehicle exhaust emissions. The particle size fractions (<63 μm; 63-125 μm; 125-250 μm; 250-500 μm; 500-1000 μm; and 1000-2000 μm) of individual PAHs in three selected sampling sites was investigated. In two of the selected sites the PAH content was independent of particle size whereas in sampling site 10 elevated PAH levels are noted in the <63 μm size fraction. Sampling site 10 is located at the junction of three road tributaries which are used as major access points to the east of the city centre. Finally, the potential health risk for unintentional consumption of PAHs was assessed in terms of a mean daily intake (based on an ingestion rate of 100 mg d⁻¹). It was found that all 4-6 membered ring PAHs had concentrations in excess of the mean daily intake thereby reflecting a potential health risk, particularly in the smallest size particle fractions.     

Transfer and accumulation of metals in a soil-diet-wood mouse food chain along a metal pollution gradient

We studied the accumulation and transfer of As, Cd, Cu, Pb and Zn in the compartments of a soil-diet-wood mouse (Apodemus sylvaticus) food chain at five sites located along a metal pollution gradient. We observed a clear gradient in metal exposure at increasing distance from the smelter in all compartments of the food chain for the non-essential metals. The gradient was less clear or absent for the essential metals in acorn and mice target tissues. Regression analysis showed overall strong relationships within the soil-diet and diet-wood mouse compartments for the non-essential metals, while relationships for the essential metals were weak or absent. Total metal in soil appeared as a better predictor for the diet metal content than the available metal fraction. Our results suggest a more important transfer of non-essential elements through the food chain than essential elements, which is probably a consequence of homeostatic control of the latter group.     

Multi-residues analysis of pre-emergence herbicides in fluvial sediments: application to the mid-Garonne River

Contamination of man and ecosystems by pesticides has become a major environmental concern. Whereas many studies exist on contamination from agriculture, the effects of urban sources are usually omitted. Fluvial sediment is a complex matrix of pollutants but little is known of its recent herbicide content. This study proposes a method for a fast and reliable analysis of herbicides by employing the accelerated solvent extractor (ASE). The aim of the study is to show the impact of a major town (Toulouse) on the herbicide content in the river. In this study, three herbicide families (i.e.s-triazine, substituted ureas and anilides) were analysed in fluvial sediment fractions at 11 sampling sites along the mid-Garonne River and its tributaries. River water contamination by herbicides is minor, except for at three sites located in urban areas. Among the herbicidal families studied, urban and suburban areas are distinguished from rural areas and were found to be the most contaminated sites during the study period, a winter low-water event. The herbicide content of the coarse sediment fractions is about one third of that found in the fine fractions and usually ignored. The distribution of pesticide concentrations across the whole range of particle sizes was investigated to clarify the role of plant remains on the significant accumulation in the coarse fractions.     

Evaluation of PCDD/F oxidation catalysts: confronting studies on model molecules with tests on PCDD/F-containing gas stream

Titania supported vanadium oxide is a renowned catalyst for the abatement of polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) from gas effluents. To develop more active formulations, researchers mainly rely on lab-scale experiments on “PCDD/Fs-mimicking substances”, like (chloro)-benzene. Using such model compounds is convenient whereas handling PCDD/Fs in the laboratory is potentially hazardous and complicated. Recent studies, however, challenged some foremost conclusions of model compound based studies, starting from the observation that different model compounds gave contrasted results. Thus the present work aims at confronting some of these dubious conclusions with direct experimental tests on PCDD/Fs. One reference V₂O₅/TiO₂ catalyst and three modified formulations (V₂O₅/TiO₂-SO₄, V₂O₅-MoO₃/TiO₂, and V₂O₅-WO₃/TiO₂) have been evaluated. A dedicated apparatus was used which allows safe and reliable tests on a mixture of PCDD/Fs congeners. Some of the previously proposed catalyst improvement strategies actually prove to be disadvantageous in the removal of PCDD/Fs. In particular, MoO₃- and WO₃-modified catalysts were significantly less active than the reference catalyst. These observations show that conclusions from model compound based studies must be drawn with care and should ideally be confronted with tests on the actual target pollutants.