Performance and validation of a coupled parallel ADCIRC–SWAN model for THANE cyclone in the Bay of Bengal

An accurate prediction of near-shore sea-state is imperative during extreme events such as cyclones required in an operational centre. The mutual interaction between physical processes such as tides, waves and currents determine the physical environment for any coastal region, and hence the need of a parallelized coupled wave and hydrodynamic model. The present study is an application of various state-of-art models such as WRF, WAM, SWAN and ADCIRC used to couple and simulate a severe cyclonic storm Thane that developed in the Bay of Bengal during December 2011. The coupled model (ADCIRC–SWAN) was run in a parallel mode on a flexible unstructured mesh. Thane had its landfall on 30 December, 2011 between Cuddalore and Pondicherry where in-situ observations were available to validate model performance. Comprehensive experiment on the impact of meteorological forcing parameters with two forecasted tracks derived from WRF model, and JTWC best track on the overall performance of coupled model was assessed. Further an extensive validation experiment was performed for significant wave heights and surface currents during Thane event. The significant wave heights measured along satellite tracks by three satellites viz; ENVISAT, JASON-1 and JASON-2, as well in-situ near-shore buoy observation off Pondicherry was used for comparison with model results. In addition, qualitative validation was performed for model computed currents with HF Radar Observation off Cuddalore during Thane event. The importance of WRF atmospheric model during cyclones and its robustness in the coupled model performance is highlighted. This study signifies the importance of coupled parallel ADCIRC–SWAN model for operational needs during extreme events in the North Indian Ocean.     

CO2 emissions reduction from the power system in India

The power system in India accounts for nearly one-third of CO₂ emissions of the country as a whole. A comparison of some of the technical options to reduce CO₂ emissions is presented in this paper. A linear programming framework is used to simulate the integrated optimal operation of the three regional grids, and it is shown that such operations lead to lower fuel costs and to lower CO₂ emissions. The same framework is used to see how a rise in thermal efficiency translates into a CO₂ emissions reduction. Reduced fuel requirements also lead to reductions in other pollutants ie SO₂, NO_x and fly ash. The reductions in CO₂ emissions and other pollutants are at far lower cost in the case of integrated optimal operations as compared to reductions due to gas fuelled generation or thermal efficiency improvements. However, thermal efficiency improvements under optimal integrated operations result in much higher reductions in operating costs, coal consumption and total emissions of all pollutants.     

Effect of vermicomposting on calcium,sulphur and some heavy metal content of different biodegradable organic wastes under liming and microbial inoculation

A study was conducted to evaluate the changes in total calcium and sulphur and some heavy metal (Zn, Cu, and Pb) concentration of different organic wastes affected by liming and microorganism inoculation. Vermicomposting was an effective technology for disposal of organic substrates like municipal solid wastes (MSW), possessing comparatively higher concentration of heavy metals. The addition of lime in initial organic substrates significantly (P ≤ 0.05) increased total calcium and total sulphur content of vermicomposts. Inoculation of microorganisms significantly (P ≤ 0.05) reduced the heavy metal content of final products as compared to control. Fungal strains were comparatively more effective in detoxification of heavy metals than B. polymyxa.     

Sustainable approach for the treatment of poultry manure and starchy wastewater by integrating dark fermentation and microalgal cultivation

Journal of Material Cycles and Waste Management - Dwindling fossil fuels, and the rise in energy demand have urged us to explore alternative renewable energy forms. An integrated process of dark...     

Cross-reactivity of anti-Salmonella egg-yolk antibodies to Salmonella serovars

The cross-reactivity of egg yolk antibodies specific to antigens of Salmonella Enteritidis and Salmonella Typhimurium to killed bacterial cells of common Salmonella serovars were tested using an indirect Enzyme Linked Immunosorbent Assay (ELISA). Egg yolk antibodies were produced against purified fimbriae, flagella and lipopolysaccharide (LPS) of S. Enteritidis strain ATCC13076 and flagella, LPS and outer membrane proteins (OMP) of S. Typhimurium strain ATCC13311. For immunological specificity of egg yolk antibodies against killed bacterial cells, we found that the titers of the anti-S. Enteritidis egg yolk antibodies were higher than those of the anti-S. Typhimurium antibodies. In the evaluation of cross-reactivity of these egg yolk antibodies to various Salmonella serovars, we observed that the anti-S. Enteritidis antibodies exhibited more specific affinity than those of the anti-S. Typhimurium antibodies. All S. Enteritidis strains reacted specifically with the anti-S. Enteritidis fimbrial and flagellar egg yolk antibody whereas anti-S. Enteritidis LPS and anti-S. Typhimurium LPS, OMP and flagellar antibodies displayed non–specific reactivity to all Salmonella serovars used in this study. This finding suggests that it may be possible to design a anti-fimbrial egg yolk antibody of S. Enteritidis as a diagnostic tool and a cocktail of OMP and LPS antigens of S. Enteritidis and S. Typhimurium could be used for administering broad spectrum passive immunity to protect against the colonization of pathogenic Salmonella strains in food animals.     

Escherichia coli load reduction from runoff by vegetative filter strips: a laboratory-scale study

Vegetative filter strips (VFS) are commonly used best management practices for removing contaminants from runoff. Additional research is warranted to determine their efficiency and the most appropriate metrics for predicting fecal bacteria reductions. The objective of this research was to determine VFS effectiveness in removing from runoff relative to inflow rate, infiltration capacity, and flow concentration. This research also investigated the presence of in runoff from clean water runon after diluted manure runon events. A laboratory-scale VFS soil box (200 cm long, 100 cm wide, 7.5% slope) was packed with a sandy loam soil. Ten constant-flow VFS experiments were conducted with and without vegetation (8-10 cm ryegrass [ L.]) at low (20-40 cm s), medium (40-60 cm s), and high (85-120 cm s) flow rates and for a full (100 cm) or concentrated (40 cm) VFS flow width to simulate a channelizing flow condition. Two runon events were investigated for each experimental condition: (i) diluted liquid swine manure runon and (ii) clean water runon 48 h afterward. was used as an indicator of fecal contamination and was quantified by the most probable number (MPN) technique. No concentration reductions were observed based on peak outflow concentrations, and only small concentration reductions were observed based on outflow event mean concentrations. The mass reductions ranged from 22 to 71% and were strongly correlated to infiltration or runoff reduction ( = 0.88), which was dependent on the degree of flow concentration. Little to no effect of sedimentation on transport was observed, hypothesized to be due to minimum attachment to sediment particles because the bacteria originated from manure sources. Therefore, the design of VFS for bacteria removal should be based on the infiltration capacity in the VFS and should prevent concentrated flow, which limits total infiltration. The event mean concentrations in clean water runon experiments were between 10 and 100 MPN per 100 mL; therefore, under these conditions, VFS served as a source of residual from previous runon events.