Essential oils and their bioactive compounds as eco-friendly novel green pesticides for management of storage insect pests: prospects and retrospects

Environmental Science and Pollution Research - The control of storage insect pests is largely based on synthetic pesticides. However, due to fast growing resistance in the targeted insects,...     

Effect of aging level on viscoelastic properties of asphalt binder containing waste polyethylene

Due to inherent advantages, waste polyethylene (generated from domestic sources) has been used as asphalt modifier. This article discusses viscoelastic properties of the polyethylene modified asphalt binder. Several asphalt concrete mixtures were designed by varying polyethylene and asphalt content. Shredded polyethylene incorporated into asphalt concrete by dry mixing process. Using optimised asphalt content (at several polyethylene percentages), mixtures were prepared and compacted. These compacted specimens were aged for different duration in convection oven. Asphalt binder (from aged specimens) was extracted and tested for its viscoelastic properties using dynamic shear rheometer. Comparison of mastercurves indicated increase in complex modulus and decrease in phase angle values with addition of polyethylene at all reduced frequencies. However, the extent of change was highly dependent on frequency, aging duration and polyethylene content. This indicates that the addition of polyethylene provides more resilience to asphalt binder especially with less aging time. Storage modulus mastercurves (at lower frequencies) and relaxation modulus values (at longer time) indicate polyethylene provides additional stiffening to binder. Further, changes in viscous modulus with addition of polyethylene were marginal. Overall results indicate that waste polyethylene improves the properties of asphalt binder over extended loading period when heated for less time during mixing.     

A spore-based miniaturized novel assay for rapid aflatoxin detection in milk

Environmental Chemistry Letters - Aflatoxin M1 contamination in milk and dairy products is a major issue worldwide. Aflatoxin is a carcinogen that enters into the milk through animals feed. Here,...     

Work-Related Musculoskeletal Disorders,Job Stressors and Gender Responses in Foundry Industry

The main aim of this paper was to identify job stressors, gender responses and association of psychosocial work stressors with prevalence of work related musculoskeletal disorders (MSDs) among foundry workers. The data were obtained with ergonomics checklist using Likert scale. The results of this study showed a high prevalence of MSDs among workers. The male workers were more prone to pain in neck while the female workers were more prone to MSDs in upper back and shoulders. Correlation analysis showed significant relationship of dimensions of work aspects with pain and discomfort. It proved that the work-related MSDs are the results of interaction of multiple stressors associated with work and work environment, and other personal factors. ANOVA indicated that the perception of work aspects as stressors differed significantly between male and female workers.     

Biochemical changes in plant leaves as a biomarker of pollution due to anthropogenic activity

The air pollution due to anthropogenic activities seriously affected human life, vegetation, and heritage as well. The vegetation cover in and around the city mitigates the air pollution by acting as a sink for pollution. An attempt was made to evaluate biochemical changes occurred in four selected plant species, namely Azadirachta indica, Mangifera indica, Delonix regia, and Cassia fistula of residential, commercial, and industrial areas of Nagpur city in India. It was observed that the correlated values of air pollutants and plant leaves characteristics alter foliar biochemical features (i.e., chlorophyll and ascorbic acid content, pH and relative water content) of plants due to air pollution. The changes in air pollution tolerance index of plants was also estimated which revealed that these plants can be used as a biomarker of air pollution.     

Impact of alkaline-hydrolyzed biosolids (Lystek) addition on the anaerobic digestibility of TWAS in lab – And full-scale anaerobic digesters

The effect of different Lystek biosolids doses on the anaerobic digestability of thickened waste activated sludge (TWAS) was evaluated in a lab- and full-scale anaerobic digester. The overall findings of this study emphasize the beneficial impact of Lystek addition to the lab- and full-scale anaerobic digesters in terms of enhanced biogas production and increased volatile suspended solids reduction (VSSR) efficiency. Lystek added at 4% by volume to TWAS increased the methane yield from 0.22 to 0.26 L CH₄/g VSS_added at an solids retention time (SRT) of 10 days, and from 0.27 to 0.29 L CH₄/g VSS_added at an SRT of 15 days. Furthermore, the VSSRs of 37% and 47% were observed for the TWAS, and the TWAS with 4% Lystek, while at an SRT of 15 days, the observed VSSR were 49% and 58%, respectively. The lab-scale study showed that the influence of Lystek addition on methane yield and solids destruction efficiencies was more pronounced at the shorter SRT, 20% enhancement (SRT of 10 d) vs. 9% enhancement (SRT of 15 d) for methane yield, and 27% (SRT of 10 d) vs. 22% (SRT of 15 d) for VSS destruction efficiency improvement. Furthermore, addition of 4% of Lystek to the feed of the full-scale anaerobic digester at St. Marys wastewater treatment plant (WWTP) resulted in a 50% increase in the average specific methanogenic activity and 23% increase in methane yield of the biochemical methane potential tests after eight months. The results showed that Lystek degradation kinetics were 40% faster than the TWAS, as reflected by first order kinetic coefficients of 0.053 d^?1 and 0.073 d^?1 for TWAS and Lystek at an SRT of 10 days.     

Pyrolysis of jute dust: effect of reaction parameters and analysis of products

Biowastes are becoming potential feedstocks for direct utilization or conversion to solid, liquid and gaseous fuels via various thermochemical routes. In this regard, jute dust which is a major agro-industrial waste in jute mills was pyrolysed in a fixed-bed reactor with an aim to study the product distribution and their characterization and to identify the optimum condition for bio-oil yield. The investigated process variables were temperature (400–700 °C), heating rate (10 and 40 °C/min) and nitrogen gas flow rate (50–250 ml/min). The yield of bio-oil is found to be maximum at 500 °C with a heating rate of 40 °C/min. However, further increase in temperature leads to decrease in bio-oil yield. Chemical compositions of the bio-oils were investigated using chromatographic and spectroscopic techniques such as ¹H NMR, FTIR and GC–MS. The heating value of the bio-oil is 26.71 MJ/kg. The study shows that jute dust have potential for conversion to bio-oil through the process of pyrolysis to supplement the petro-derived liquid fuel for heating and transportation applications after upgrading. The biochar produced as a co-product of jute dust pyrolysis can be a potential soil amendment with multiple benefits including increased soil fertility and C-sequestration.