Oxidative and cellular stress as bioindicators for metal contamination in freshwater mollusk Lamellidens marginalis

Environmental Science and Pollution Research - The concentrations of 14 metals, namely, chromium (Cr), manganese (Mn), cobalt (Co), nickel (Ni), copper (Cu), zinc (Zn), selenium (Se), arsenic (As),...     

Influence of land use and land cover on the spatial variability of dissolved organic matter in multiple aquatic environments

Environmental Science and Pollution Research - Water quality of lakes, estuaries, and coastal areas serves as an indicator of the overall health of aquatic ecosystems as well as the health of the...     

Electricity nanogenerator from egg shell membrane: A natural waste bioproduct

ABSTRACT

In the era of developing technologies, there is always been a crisis of rising demands of energy. There is no skepticism that a lot of energy is being produced every hour for almost each and every field, but still an exploration is needed to come up with new and viable options for energy creation. The same is the objective of this paper which proposes the use of waste biomaterials in association with organic and inorganic materials as a source of energy to power up small electronic devices. In this research egg shell membrane (ESM)-based triboelectric nanogenerator (TENG) is proposed in combination with calotropis (Calo), cellulose from fruit of Bombax Ceiba (BOM), cellulose in form of tissue paper (TISU), dog hair (DH), polytetrafluoroethylene (PTFE), aluminum (Al), and copper (Cu). ESM is eco-friendly waste food by-product and available in abundance. Characterization of ESM is done by scanning electron microscope (SEM), atomic force microscope (AFM), X-ray diffraction (XRD), and Fourier transform infrared spectrophotometer (FTIR). The proposed ESM-PTFE-based TENG power up 462 green LEDs (462 × 2 V = 924 V ~ 1 kV) without rectifier and produced up to 7.61 µJ energy with 4.7 µF capacitor at 200 tapings. All the proposed ESM-based TENG combinations generate sufficient voltage to turn ON the wrist watch. This green-energy-based TENG has potential application in various fields especially related to medical devices.     

Photo-/Bio-degradability of Agro Waste and Ethylene–Propylene Copolymers Composites Under Abiotic and Biotic Environments

Composites were prepared by two methods, (i) graft copolymerization (GFC) of isotactic polypropylene (PP) with maliec anhydride, (MAH) followed by esterification with coir fiber and (ii) by direct reactive mixing (DFC) of polypropylene (PP) and ethylene–propylene (EP) copolymers with MAH and peroxide with coir fiber. These composites, after molding in films (5×5 cm, m thickness) were examined for susceptibility to biological attack by measuring the percentage weight loss in compost upto 6 months, periodically, and fungal colonization on surface of the samples, when kept as sole carbon source for the growth of Aspergillus niger in culture medium upto 40 days. Photodegradation was evaluated by monitoring the variations in FT-IR spectrum and crack formation after successive treatment with UV light (≥290 nm) for 0, 20, 50 and 100 h at 60°C in the presence of air. Specimens of virgin PP were taken as a reference during all period of photo and biodegradation studies. Significant changes were observed depending on the preparation methods during photodegradation and biodisintegration of composites. DFCs samples were disintegrated faster than GFCs during the composting whereas, in culture, GFCs were covered highly in well uniform way by fungi. It was observed that photo-oxidative ageing directly enhanced the biodegradability of composites as the increase in fungal growth rate and decrease in weight during composting were found. It was concluded that extent of compatibilization had a profound effect on photo-oxidation and biodisintegration of composite material; consequently ester bonds were main units during fungal consumption. Composition of monomers in copolymers was also showing significant effect on the degradability which decreased with increasing content of ethylene in ethylene–propylene (EP) copolymers.     

Differential sorption of herbicides as related to soil topography and organic matter 1

Abstract

The sorption of bromacil and simazine by the surface soil (0–15 cm) sampled at various positions along an 8% slope citrus grove (Candler fine sand; Typic Quartzipsamment) and at various depths (0–200 cm) at upper, middle, and lower positions along the slope were investigated. The sorption of both herbicides by the top 15 cm soil decreased considerably from the upper to mid position along the slope and increased at the lower position. The organic matter content and concentrations of Ca, Mg, K, P, and Cu in the soil showed evidence of transport of organic matter and mineral nutrients from the mid position on the slope and accumulation in the lower position. The differential sorption of herbicides by the soil samples taken at various positions along the slope was closely related to changes in organic matter content. Although sorption of bromacil and simazine varied considerably at various positions along the slope, the sorption of bromacil was very similar at depths below 30 cm regardless of positions along the slope. In the case of simazine, however, the sorption was much greater at all depths in the lower than in the upper and mid position of the slope. The sorption of both herbicides decreased considerably at depths below 30 cm at all positions along the slope, thus, indicating the potential for rapid leaching of the herbicides down the soil profile.     

Land application of biomass residue generated from palm oil processing: its potential benefits and threats

Man’s increased demand for food and better living conditions has led to over exploitation of resources and the consequent generation of enormous amounts of liquid and solid waste materials. This is one of the global challenges for mankind. In Malaysia, palm oil mill waste (POMW) contributes the highest proportion of industrial solid wastes produced yearly. Wastes from the mills include palm oil mill effluent, decanter cake, empty fruit bunches, seed shells and the fibre from the mesocarp. Direct application of POMW into agricultural soil has resulted in a number of problems such as water pollution, leaching. However, with application rates specific for targeted plant species, land application can be employed as a permanent solution to the problem of waste from palm oil mills. This review examines the characteristics of each of the palm oil wastes and their potential for use as a future fertilizer supplement.     

Distribution of improved cook stoves: analysis of field experiments using strategic niche management theory

Close to three billion people globally and over 800 million in India are dependent on direct combustion of unprocessed solid biomass fuels in inefficient traditional mud stoves. Current cooking practices, besides causing serious health problems, are also being linked to emissions of climate change and pollution agents such as black carbon and ozone precursors. In India several initiatives have been taken up to tackle the problem but the present trajectory of limited technical and social change in cooking energy use is nonetheless persistent in rural areas. In order to develop and scale up alternative cooking technology options, we have analyzed, using the principles of strategic niche management, two projects implemented by The Energy and Resources Institute (TERI) in nine villages in India. The assessment, while highlighting reasons for stability of the current cooking regime, also points to triggers that can destabilize the regime. The focus is also on assessing the influence of protection in the form of subsidies on the process of transition. User preferences relating to social and technical aspects have been analyzed, pointing to forced draft cookstoves as the preferred option notwithstanding cost reductions to address affordability concerns. The assessment indicates that while it is critically important to understand and address the preferences of users and to improve the technology, scaling up will depend on stove cost reduction through further research. Creativity in effective financing schemes and support structures put in place by fostering public–private partnerships are also needed.     

The Impact of Stratospheric Ozone on Tropospheric Air Quality

A background of ozone (O₃), principally of stratospheric origin, is present in the lower free troposphere. Typical mean O₃ levels of 50 ppb, 40 ppb, and 30 ppb are encountered here in spring, summer, and fall, respectively. Maximum hourly O₃ concentrations which are twice these mean values can be expected. Ozone from the free troposphere is routinely brought down to ground level under turbulent atmospheric conditions. Deep and rapid Intrusions of stratospheric air into the lower troposphere are associated with low-pressure troughs and occur regularly. In the mid troposphere, O₃ levels as high as 300 ppb are found within these intrusions. Observational data showing these intrusions, containing high O₃ concentrations, to directly reach ground level are currently lacking. Over the United States, an intrusion was present aloft on 8 9% of the days in 1978. The frequency, however, is somewhat reduced in summer and a northward movement is evident. During 1978, no intrusion occurred south of 30°N between June and August and none south of 40 °N in August.

The hypothesis that low levels of stratospheric O₃ produce disproportionately large amounts of O₃ in the polluted atmosphere cannot be supported from currently known chemistry but should be studied further. The experimental technique involving a ⁷Be/O₃ ratio to estimate the daily stratospheric component of ground level O₃ is unverified and considered to be inadequate for air quality applications. Estimates resulting from such a technique are considered uncertain by a factor of more than three. Specially designed aircraft studies provide the best means to determine quantitatively the impact of stratospheric O₃ on ground level air quality.     

Rapidly Locating and Characterizing Pollutant Releases in Buildings

Abstract

Releases of airborne contaminants in or near a building can lead to significant human exposures unless prompt response measures are taken. However, possible responses can include conflicting strategies, such as shutting the ventilation system off versus running it in a purge mode or having occupants evacuate versus sheltering in place. The proper choice depends in part on knowing the source locations, the amounts released, and the likely future dispersion routes of the pollutants. We present an approach that estimates this information in real time. It applies Bayesian statistics to interpret measurements of airborne pollutant concentrations from multiple sensors placed in the building and computes best estimates and uncertainties of the release conditions. The algorithm is fast, capable of continuously updating the estimates as measurements stream in from sensors. We demonstrate the approach using a hypothetical pollutant release in a five-room building. Unknowns to the interpretation algorithm include location, duration, and strength of the source, and some building and weather conditions. Two sensor sampling plans and three levels of data quality are examined. Data interpretation in all examples is rapid; however, locating and characterizing the source with high probability depends on the amount and quality of data and the sampling plan.     

Sensitivity Analysis and Evaluation of MicroFacCO: A Microscale Motor Vehicle Emission Factor Model for CO Emissions

ABSTRACT

This paper presents a sensitivity analysis of a microscale emission factor model (MicroFacCO) for predicting realtime site-specific motor vehicle CO emissions to input variables, as well as a limited field study evaluation of the model. The sensitivity analysis has shown that MicroFacCO emission estimates are very sensitive to vehicle fleet composition, speed, and ambient temperature. For the present U.S. traffic fleet, the CO emission rate (g/mi) is increased by more than 500% at 5 mph in comparison with a speed greater than 40 mph and by ~67% at ambient temperatures of 45 °F and ≥95 °F in comparison with an ambient temperature of 75 °F.