Relationship between the position preference and nutritional state of individuals in schools of juvenile roach (Rutilus rutilus)

Summary Position preferences of well-fed and food-deprived juvenile roach were investigated in schools of 2 and 4 fish in the laboratory. Food-deprived fish appeared significantly more often in the front position than their well-fed conspecifics. For fish at the same hunger level, individuals at the front of the school had the highest feeding rate. These results represent the first evidence for a relationship between the nutritional state of individual fish and their positions in a school and suggest a functional advantage of the preference. Offprint requests to: J. Krause at the present address     

Quantification of Polymerisation Processes During The Oxidative Degradation of 14C-Labelled Chlorophenols

In experiments employing the lignocellulose-decaying basidiomycetes Trametes versicolor and Stropharia rugosoannulata degrading uniformly¹⁴C-labelled 2,4-dichlorophenol and pentachlorophenol, acombination of size exclusion chromatography (SEC),fractionation, and -scintillation counting wasapplied to quantify polymerisation products formed duringchlorophenol degradation. Time-dependent mass balances weregenerated by analysis of ¹⁴C in polymerisation products,CO₂, as well as monomer non-polar and polar metabolites.Approximately 30% of the chlorophenols were found to bepolymerised. A major fraction of the polymerised productscorresponded to a molecular weight range from 0.24 – 40 kDa.Only a minor fraction could be attributed to a molecularweight >40 kDa. This method proved to be useful inquantification of polymerisation products and kinetics of thepolymerisation processes, whereas UV/Vis detection ofpolymerisation products separated by SEC led to false positiveresults. The SEC-¹⁴C method could also be applied forother complex processes where polymerisation ordepolymerisation occurs (humification, degradation oflignocellulose, formation of bound residues from xenobioticssuch as polycyclic aromatic hydrocarbons or 2,4,6-trinitrotoluene) and where spectrophotometric determinationsare difficult or impossible.     

Evaluating recycling fertilizers for tomato cultivation in hydroponics,and their impact on greenhouse gas emissions

Soilless culture systems offer an environmentally friendly and resource-efficient alternative to traditional cultivation systems fitting within the scheme of a circular economy. The objective of this research was to examine the sustainable integration of recycling fertilizers in hydroponic cultivation—creating a nutrient cycling concept for horticultural cultivation. Using the nutrient film technique (NFT), three recycling-based fertilizer variants were tested against standard synthetic mineral fertilization as the control, with 11 tomato plants (Solanum lycopersicum L. cv. Pannovy) per replicate (n = 4) and treatment: two nitrified urine-based fertilizers differing in ammonium/nitrate ratio (NH₄⁺:NO₃^?), namely (1) “Aurin” (AUR) and (2) “Crop” (CRO); as well as (3) an organo-mineral mixture of struvite and vinasse (S+V); and (4) a control (NPK). The closed chamber method was adapted for gas fluxes (N₂O, CH₄, and CO₂) from the root zone. There was no indication in differences of the total shoot biomass fresh matter and uptake of N, P and K between recycling fertilizers and the control. Marketable fruit yield was comparable between NPK, CRO and S+V, whereas lower yields occurred in AUR. The higher NH₄⁺:NO₃^? of AUR was associated with an increased susceptibility of blossom-end-rot, likely due to reduced uptake and translocation of Ca. Highest sugar concentration was found in S+V, which may have been influenced by the presence of organic acids in vinasse. N₂O emissions were highest in S+V, which corresponded to our hypothesis that N₂O emissions positively correlate with organic-C input by the fertilizer amendments. Remaining treatments showed barely detectable GHG emissions. A nitrified urine with a low NH₄⁺:NO₃^– (e.g., CRO) has a high potential as recycling fertilizer in NFT systems for tomato cultivation, and S+V proved to supply sufficient P and K for adequate growth and yield. Alternative cultivation strategies may complement the composition of AUR.

     

Three years of operational experience from Schauinsland CTBT monitoring station

Data from three years of operation of a low-level aerosol sampler and analyzer (RASA) at Schauinsland monitoring station are reported. The system is part of the International Monitoring System (IMS) for verification of the Comprehensive Nuclear-Test-Ban Treaty (CTBT). The fully automatic system is capable to measure aerosol borne gamma emitters with high sensitivity and routinely quantifies 7Be and 212Pb. The system had a high level of data availability of 90% within the reporting period. A daily screening process rendered 66 tentative identifications of verification relevant radionuclides since the system entered IMS operation in February 2004. Two of these were real events and associated to a plausible source. The remaining 64 cases can consistently be explained by detector background and statistical phenomena. Inter-comparison with data from a weekly sampler operated at the same station shows instabilities of the calibration during the test phase and a good agreement since certification of the system.     

A new compilation of the atmospheric 85krypton inventories from 1945 to 2000 and its evaluation in a global transport model

This paper gives the yearly (85)Kr emissions of all known reprocessing facilities, which are the main sources of (85)Kr in the atmosphere since 1945, for the years 1945 until 2000. According to this inventory 10,600 PBq (Peta=10(15)) of (85)Kr have been globally emitted from the year 1945 until the end of 2000. The global atmospheric inventory at the end of the year 2000 amounts to 4800 PBq. These emissions have been incorporated into the ECHAM4 atmospheric general circulation model as point sources. Monthly mean model results are compared with measurements made at different locations and times. The influence of each source on the measured concentrations at various locations is studied. The calculated concentrations are found to give reasonably good agreement with the observations, indicating that the emission inventory is realistic. Although, at all northern hemispheric observation sites the model tends to slightly overestimate the concentrations. A possible reason for this overestimation can be found in model features (coarse resolution in time and space). The most prominent discrepancy that is consistently repeated at all northern hemispheric stations occurs in the early 1990s. This could most likely be related to an overestimate of sources. Possibly, the Russian emissions declined earlier than assumed in the current database. Another discrepancy between observations and simulations indicating an incompleteness of the release data is found at some southern hemispheric sites. The variability of their observations could only be explained by regional sources. However, several spikes occur after 1992 when no reprocessing facility is known to be in operation in the southern hemisphere. Production of isotopes for radiopharmaceuticals like technetium-99m from highly enriched uranium is the most likely explanation.     

Estimation and validation of PM2.5/PM10 exhaust and non-exhaust emission factors for practical street pollution modelling

In order to carry out efficient traffic and air quality management, validated models and PM emission estimates are needed. This paper compares current available emission factor estimates for PM₁₀ and PM_2.5 from emission databases and different emission models, and validates these against eight high quality street pollution measurements in Denmark, Sweden, Germany, Finland and Austria.The data sets show large variation of the PM concentration and emission factors with season and with location. Consistently at all roads the PM₁₀ and PM_2.5 emission factors are lower in the summer month than the rest of the year. For example, PM₁₀ emission factors are in average 5–45% lower during the month 6–10 compared to the annual average.The range of observed total emission factors (including non-exhaust emissions) for the different sites during summer conditions are 80–130 mg km⁻¹ for PM₁₀, 30–60 mg km⁻¹ for PM_2.5 and 20–50 mg km⁻¹ for the exhaust emissions.We present two different strategies regarding modelling of PM emissions: (1) For Nordic conditions with strong seasonal variations due to studded tyres and the use of sand/salt as anti-skid treatment a time varying emission model is needed. An empirical model accounting for these Nordic conditions was previously developed in Sweden. (2) For other roads with a less pronounced seasonal variation (e.g. in Denmark, Germany, Austria) methods using a constant emission factor maybe appropriate. Two models are presented here.Further, we apply the different emission models to data sets outside the original countries. For example, we apply the “Swedish” model for two streets without studded tyre usage and the “German” model for Nordic data sets. The “Swedish” empirical model performs best for streets with studded tyre use, but was not able to improve the correlation versus measurements in comparison to using constant emission factors for the Danish side. The “German” method performed well for the streets without clear seasonal variation and reproduces the summer conditions for streets with pronounced seasonal variation. However, the seasonal variation of PM emission factors can be important even for countries not using studded tyres, e.g. in areas with cold weather and snow events using sand and de-icing materials. Here a constant emission factor probably will under-estimate the 90-percentiles and therefore a time varying emission model need to be used or developed for such areas.All emission factor models consistently indicate that a large part (about 50–85% depending on the location) of the total PM₁₀ emissions originates from non-exhaust emissions. This implies that reduction measures for the exhaust part of the vehicle emissions will only have a limited effect on ambient PM₁₀ levels.     

Three-dimensional ultrasound in prenatal diagnosis of skeletal dysplasia

A lethal form of bone dysplasia, platylospondylic lethal chondrodysplasia, was diagnosed prenatally using three-dimensional ultrasound. The various types of three-dimensional imaging mode provided diagnostic details not available by conventional two-dimensional ultrasound. The diagnosis was made after referral in the 23rd week of gestation, allowing termination of pregnancy due to the poor prognosis. Prenatal sonograms were compared with postnatal radiographs.     

Detection of Hepatitis E Virus in Archived Rabbit Serum Samples,Germany 1989

We detected Hepatitis E virus in serum samples of wild rabbits that were hunted in 1989 around the city of Greifswald, Germany. The recovery of one partial sequence and subsequent phylogenetic analysis indicates a close relationship to rabbit HEV sequences from France and suggests a long-established circulation of rabbit HEV in Europe.     

Safety studies on hydraulic proportional valves with electrical position feedback.

The authors analysed a proportional valve with electrical position feedback for its failure behaviour. Several failures were introduced into the feedback loop, especially into the 2 solenoids and the inductive position transducer. The behaviour of the valve for square and ramp reference signals was recorded and systematically analysed. It was shown that failures could be detected by monitoring the residual signal from the equipment under control or the residual signal from the sensor. It was possible to achieve the safe position within twice the normal response time of the valve by switching off the current of both solenoids. The application of these results for a new generation of safe proportional valves is discussed. The use of the results of these investigations obviates the need for redundancy of the electrical position monitoring arrangement in a safe proportional valve.     

A European approach to increase innovative soil and groundwater remediation technology applications

The European Commission (EC) has recognized a need for strengthening innovation of environmental technologies in order to increase competitiveness of European technologies on a global market and to achieve a more sustainable development in Europe. In the area of soil and groundwater remediation, innovative technologies are principally available and have proven applicability and performance on demonstration scales, but market uptake is disappointing. Consequently, initiatives have been launched in order to promote application of these technologies and to investigate on the harmonization of applications. The European Co‐ordination Action for Demonstration of Efficient Soil and Groundwater Remediation (EURODEMO), an EC‐funded project, is one strategic initiative for supporting these goals. This article summarizes results obtained so far regarding the investigation of the European situation and some undertaken and envisaged measures to achieve better market uptake. The results of this research project may serve as prerequisites for a European Environmental Technologies Verification (ETV) process. © 2006 Wiley Periodicals, Inc.