A study on engineering characteristics of asphalt concrete using filler with recycled waste lime

This study focuses on determining the engineering characteristics of asphalt concrete using mineral fillers with recycled waste lime, which is a by-product of the production of soda ash (Na(2)CO(3)). The materials tested in this study were made using a 25%, 50%, 75%, and 100% mixing ratio based on the conventional mineral filler ratio to analyze the possibility of using recycled waste lime. The asphalt concretes, made of recycled waste lime, hydrated lime, and conventional asphalt concrete, were evaluated through their fundamental engineering properties such as Marshall stability, indirect tensile strength, resilient modulus, permanent deformation characteristics, moisture susceptibility, and fatigue resistance. The results indicate that the application of recycled waste lime as mineral filler improves the permanent deformation characteristics, stiffness and fatigue endurance of asphalt concrete at the wide range of temperatures. It was also determined that the mixtures with recycled waste lime showed higher resistance against stripping than conventional asphalt concrete. It was concluded from various test results that a waste lime can be used as mineral filler and, especially, can greatly improve the resistance of asphalt concrete to permanent deformation at high temperatures.     

Qualitative Study of Organic Compounds in Wastewaters of a Swine Slaughterhouse

The main purpose of this work was the preliminary qualitative study of organic compounds in wastewaters of swine slaughterhouses. The samples were collected in a local abattoir and submitted to Liquid-Liquid Extraction (LLE) and Solid-phase Extraction (SPE) with XAD-4^TM resin as stationary phase. The instrumental analysis was performed by Gas Chromatography with Mass Spectrometer Detector (GC/MSD). The compounds present in the LLE and SPE extracts were identified by the GC/MSD library (Wiley). The results pointed out that SPE and LLE can extract practically the same classes of compounds at the same amounts. LLE works well for the extraction of polar organic compounds, with acidified samples, while SPE presents a better performance for the extraction of less polar organic compounds. Aldehydes were main class of the compounds extracted by SPE and LLE and decenal was the major aldehyde identified. Fatty alcohols and carboxylic acids were also identified but in minor proportions.     

Iron-doped copper 1,4-benzenedicarboxylate as photo-Fenton catalyst for degradation of methylene blue

Abstract

A metal-organic framework of iron-doped copper 1,4-benzenedicarboxylate was synthesized and, for the first time, utilized as a heterogeneous photo-Fenton catalyst for degradation of methylene blue dye in aqueous solution under visible light irradiation. The synthesized materials were characterized by scanning electron microscopy, Fourier-transform infrared spectroscopy, X-ray diffraction and energy-dispersive X-ray spectroscopy. The influence factors, kinetics, and stability of the synthesized catalysts were investigated in detail. Iron-doped copper 1,4-benzenedicarboxylate showed higher degradation efficiency than pure copper 1,4-benzenedicarboxylate. An almost complete degradation was achieved within 70?min under visible light irradiation at a solution pH of 6, a catalyst loading of 1?g?L^?1, a H₂O₂ dosage of 0.05?mol L^?1 and methylene blue concentration of 50?mg?L^?1. Recycling studies demonstrated that the iron-doped copper 1,4-benzenedicarboxylate is a promising heterogeneous photo-Fenton catalyst for long-term removal of methylene blue dye from industrial wastewater.     

Functional classification of swine manure management systems based on effluent and gas emission characteristics

Gaseous emissions from swine (Sus scrofa) manure storage systems represent a concern to air quality due to the potential effects of hydrogen sulfide, ammonia, methane, and volatile organic compounds on environmental quality and human health. The lack of knowledge concerning functional aspects of swine manure management systems has been a major obstacle in the development and optimization of emission abatement technologies for these point sources. In this study, a classification system based on gas emission characteristics and effluent concentrations of total phosphorus (P) and total sulfur (S) was devised and tested on 29 swine manure management systems in Iowa, Oklahoma, and North Carolina in an effort to elucidate functional characteristics of these systems. Four swine manure management system classes were identified that differed in effluent concentrations of P and S, methane (CH4) emission rate, odor intensity, and air concentration of volatile organic compounds (VOCs). Odor intensity and the concentration of VOCs in air emitted from swine manure management systems were strongly correlated (r2 = 0.88). The concentration of VOC in air samples was highest with outdoor swine manure management systems that received a high input of volatile solids (Type 2). These systems were also shown to have the highest odor intensity levels. The emission rate for VOCs and the odor intensity associated with swine manure management systems were inversely correlated with CH4 and ammonia (NH3) emission rates. The emission rates of CH4, NH3, and VOCs were found to be dependent upon manure loading rate and were indirectly influenced by animal numbers.     

Application of WRF-Chem to simulate air quality over Northern Vietnam

Environmental Science and Pollution Research - The WRF-Chem (Weather Research and Forecasting with Chemistry) model is implemented and validated against ground-based observations for meteorological...     

Estimation of COVID-19 patient numbers using artificial neural networks based on air pollutant concentration levels

Environmental Science and Pollution Research - The dilemma between health concerns and the economy is apparent in the context of strategic decision making during the pandemic. In particular,...