MnxCe1-xO2／γ-Al2O3催化剂的制备及其催化甲苯的燃烧性能

以γ-Al2O3为载体,以MnxCe1-xO2为催化活性组分,采用浸渍法制备了一系列负载型MnxCe1-xO2／γ-Al2O3催化剂（x=0、0．2、0．4、0．6、0．8、0．9、1）,在固定床反应器中评价了催化剂对甲苯的催化燃烧性能。结果表明,MnxCe1-xO2／γ-Al2O3催化剂的催化活性与催化剂的焙烧温度、活性组分MnxCe1-xO2的负载量以及Mn、Ce摩尔比有显著关系,其中焙烧温度550℃、负载量为20％、Mn、Ce摩尔比为4：1时,即MnxCe1-xO2／γ-Al2O3催化剂对甲苯的催化性能最佳,反应温度为180℃时,甲苯的转化率达到95％。并在连续100h的稳定性操作后,催化剂的活性基本无变化。采用XRD、BET以及SEM等分析测试手段对催化剂的结构以及表面进行了表征。     

环渤海及其邻近地区引种常绿杜鹃花气候相似性研究——兼论加权欧几里得距离法在杜鹃花引种栽培区域预测中的应用

通过模糊数学方法,对环渤海及其邻近地区引种栽培"华西雨屏带"中山区常绿杜鹃的气候相似性进行了初步探讨和预测。研究提取了11项气象指标,其中5项作为"门槛指标",6项作为"有效样本集"考察指标,并根据专家经验对考察指标赋予了不同的权重和可控系数。在此基础上,通过数学建模对22个城市的有关气象要素进行了考察和计算。结果表明,8个城市进入上述"有效样本集",可分为3个适宜性等级,其中环渤海地区的日照、威海、青岛进入次高适宜等级,大连进入最低适宜等级。围绕研究结果,对被考察城市引种特定区域常绿杜鹃的适应性问题进行了分析,并对有关研究方法进行了探索性修订。     

微波协同活性炭处理偶氮染料废水的研究

以粉末活性炭为催化剂,采用微波协同活性炭工艺,对偶氮染料(酸性芷青GGR和酸性嫩黄G)废水进行处理。考察了活性炭用量、微波功率、辐射时间、偶氮染料初始浓度对2种偶氮染料去除率的影响。实验结果表明,酸性芷青GGR初始质量浓度为100mg/L、活性炭用量为12.5g/L、微波辐射时间为10min、微波功率为500W条件下,酸性芷青GGR的去除率可达90.28%;酸性嫩黄G初始质量浓度为100mg/L、活性炭用量为10.0g/L、微波辐射时间为8min、微波功率为500W条件下,酸性嫩黄G的去除率可达95.87%;微波协同活性炭处理2种偶氮染料的反应均呈现一级反应动力学特征。     

Fractionation of plutonium in environmental and bio-shielding concrete samples using dynamic sequential extraction

Fractionation of plutonium isotopes (²³⁸Pu, ^239,240Pu) in environmental samples (i.e. soil and sediment) and bio-shielding concrete from decommissioning of nuclear reactor were carried out by dynamic sequential extraction using an on-line sequential injection (SI) system combined with a specially designed extraction column. Plutonium in the fractions from the sequential extraction was separated by ion exchange chromatography and measured using alpha spectrometry. The analytical results show a higher mobility of plutonium in bio-shielding concrete, which means attention should be paid to the treatment and disposal of nuclear waste from decommissioning.     

碱式硫酸铝溶液中SO42-的测定

建立了以铬黑T为指示剂,乙二胺四乙酸二钠反滴定过量BaCl₂的碱式硫酸铝溶液中SO₄^2-的测定方法。实验确定的操作条件为：待测试样稀释后ρ（SO_4^2-）为0.025 ~0.100 g/L,BaCl₂过量率为25%~100%,并且在加入BaCl₂前将试样煮沸,三乙醇胺加入量为0.10 L/L。该法回收率在98.90%~100.72%,相对标准偏差小于1%。测定方法准确,可靠,且操作简便、快速。     

混凝一气浮控制三卤甲烷生成势的研究

研究了混凝一气浮工艺对不同分子量区间三卤甲烷生成势（trihalomethanes formation potential,THMFP）的去除效果及絮体形态对THMFP去除效果的影响。结果表明,混凝一气浮工艺以去除大分子量区间THMFP为主,对小分子量区间THMFP的去除效果较差。UV254值与THMFP值的线性相关系数为0．9449,UV254值可以较好地反映THMFP的含量。絮体的分形维数为1．17～1．2时,孔隙率较大,可增加絮体对THMFP的活性吸附空间,且絮体相对密度较小,可增强同向絮凝作用,增加絮体和THMFP的接触概率,有利于气浮对THMFP的去除。     

Assessment of heavy metal pollution from a Fe-smelting plant in urban river sediments using environmental magnetic and geochemical methods

Environmental magnetic proxies provide a rapid means of assessing the degree of industrial heavy metal pollution in soils and sediments. To test the efficiency of magnetic methods for detecting contaminates from a Fe-smelting plant in Loudi City, Hunan Province (China) we investigated river sediments from Lianshui River. Both magnetic and non-magnetic (microscopic, chemical and statistical) methods were used to characterize these sediments. Anthropogenic heavy metals coexist with coarse-grained magnetic spherules. It can be demonstrated that the Pollution Load Index of industrial heavy metals (Fe, V, Cr, Mo, Zn, Pb, Cd, Cu) and the logarithm of saturation isothermal remanent magnetization, a proxy for magnetic concentration, are significantly correlated. The distribution heavy metal pollution in the Lianshui River is controlled by surface water transport and deposition. Our findings demonstrate that magnetic methods have a useful and practical application for detecting and mapping pollution in and around modern industrial cities.     

A comparative study on milk packaging using life cycle assessment: from PA-PE-Al laminate and polyethylene in China

A Life Cycle Assessment (LCA) approach was used to compare the environmental impacts in the life cycle of two milk packaging systems, PA-PE-Al laminate—a laminated foil made from paper, polyethylene and aluminum foil—and polyethylene. The data for the mass, energy fluxes and environmental emissions were obtained from published literature and from site investigations, for the two systems being analyzed for environmental impacts. The application of LCA using Eco-Indicator 99 has made the comparison of the environmental impacts of the two milk packages possible. The results of this LCA study are discussed and the results reveal that the composite packaging has a slightly higher environmental impact than the plastic one. In addition, the environmental impact of raw material extraction is the highest in all of the life cycle stages except for disposal. The environmental impact of composite packaging mainly comes from the fossil fuels, land use and respiratory inorganics categories, while the plastic packaging mainly comes from the fossil fuels category. However, the composite packaging has a greater environmental impact because it has not been well recycled and reused. This environmental impact could be decreased by developing the technology to separate out polyethylene and aluminum from the packaging.     

宝钢厂区植被碳储量及其固碳效益评价

以著名钢铁企业上海宝钢为例,基于厂区植被调查、航片数字化解释、优势种生物量测定及模型建立,对宝钢厂区植被碳储量和固碳能力进行估算,并通过碳税法对其固碳效益进行评价,以期为城市工业区绿地群落配置和绿化树种选择、企业绿化建设的费用效益分析提供更为科学的依据。结果表明:宝钢厂区植被总碳储量为3992.99～4736.17 t,固碳效益为13507.33～16185.85万元;平均碳密度为45.82～53.27 t/hm2,固碳能力为5.91～6.87t/(hm2.a),高于上海城市森林平均值,但小于中国森林平均值,一定程度上受平均胸径、郁闭度及群落密度等因素影响。厂区在进行绿化建设时,应考虑选择防污且固碳能力强的植物,构建防污固碳兼有型群落,发挥植被的多元功能。