Don’t get the blues: conspicuous nuptial colouration of male moor frogs (Rana arvalis) supports visual mate recognition during scramble competition in large breeding aggregations

Conspicuous male colouration is expected to have evolved primarily through selection by female choice. In what way conspicuous colours could be advantageous to males scrambling for mates remains largely unknown. The moor frog (Rana arvalis) belongs to the so-called explosive breeders in which spawning period is short; intrasexual competition is strong, and males actively search and scramble for females. During breeding, male body colouration changes from a dull brown (similar to females) to a conspicuous blue, and we wanted to test if male blueness influences mating success or facilitates male mate recognition. To do so, we first measured the colour of mated and non-mated males using a spectrophotometer. In an experiment, we then analysed interactions of actual male moor frogs in natural spawning aggregations with a brown (resembling a female or a non-breeding male) and a blue model frog. Mated and non-mated males did not differ in colouration, suggesting that female choice based on colour traits was unlikely. In our behavioural experiment, male moor frogs spent significantly more time in contact and in amplexus with the brown model than with the blue model. Our results suggest that the nuptial colouration in moor frogs can act as a new type of visual signal in anurans evolved to promote instantaneous mate recognition allowing males to quickly move between rivals while scrambling for females.     

Sequentielle Schwermetallextraktion aus Staubniederschlägen und Stra\ensedimenten

For the application of our method for the sequential extraction of heavy metals from microsamples presented in part 1 (“Sequentielle Schwermetallextraktion von Mikroproben” — “Sequential Extraction of Heavy Metals from Micro Samples”) an investigation was carried out to evaluate airborne dust fallout and street sediments at two urban sites where different heavy metal immission rates occur due to traffic influence. In the street sediments the total concentrations of zinc, copper and lead was three to fivefold higher in the silt and clay fraction (< 63 μm) than in the particle size fraction (< 1,12 mm), but showed nearly the same mobilisation behaviour. The dust samples showed equal mobilisation behaviour as the street sediments for copper and lead, while zinc was considerably more mobile in the dust samples: In extraction steps I–IV (I: mobile fraction; II: easily deliverable fraction; III: fraction bound to manganese oxides; IV: fraction bound organic to matter) zinc, copper and lead in street sediments, as well as copper and lead in dust samples, were dissolved to 40–70%, whereas about 80% of zinc in the dust samples was already dissolved in extraction step I.     

An evaluation of indoor and outdoor biological particulate matter

The incidences of allergies, allergic diseases and asthma are increasing world wide. Global climate change is likely to impact plants and animals, as well as microorganisms. The World Health Organization, U.S. Environmental Protection Agency, U.S. Department of Agriculture, U.S. Department of Health and Human Services, and the Intergovernmental Panel on Climate Change cite increased allergic reactions due to climate change as a growing concern. Monitoring of indoor and ambient particulate matter (PM) and the characterization of the content for biological aerosol concentrations has not been extensively performed. Samples from urban and rural North Carolina (NC), and Denver (CO), were collected and analyzed as the goal of this research. A study of PM₁₀ (<10 μm in aerodynamic diameter) and PM_2.5 (<2.5 μm in aerodynamic diameter) fractions of ambient bioaerosols was undertaken for a six month period to evaluate the potential for long-term concentrations. These airborne bioaerosols can induce irritational, allergic, infectious, and chemical responses in exposed individuals. Three separate sites were monitored, samples were collected and analyzed for mass and biological content (endotoxins, (1,3)-β-d-glucan and protein). Concentrations of these bioaerosols were reported as a function of PM size fraction, mass and volume of air sampled. The results indicated that higher concentrations of biologicals were present in PM₁₀ than were present in PM_2.5, except when near-roadway conditions existed. This study provides the characterization of ambient bioaerosol concentrations in a variety of areas and conditions.     

Bewertung der Umweltgefährlichkeit von Stoffen

By sending a questionnaire to all companies of the pulp and paper, textile finishing and leather industries in Germany a study ascertained wastewater data concerning the general situation, treatment processes and specific amounts. With these data standard figures used in the EU for the assessment of chemical substances were checked. The volume flows of the industrial sewage treatment were determined for the facilities of all three branches which discharge their wastewater directly to the receiving waters. The 10 percentile score of these facilities amounted to only a quarter of the EU standard figure of 2,000 m³/d. This value is related to a standardised waste water treatment plant within the EU, which treated the wastewater of 200 l/d from 10,000 inhabitants. The analyses of the entire branch in each case yield dilution factors of 20–70% of the EU standard value of 10. Only the full tanning leather companies yielded a dilution factor of 10. The volume flows of the sewage treatment plants of the facilities discharging to the sewer system exceeds 2,000 m³/d in call cases.     

Aqueous Extracts of <Emphasis Type="Italic">Hibiscus sabdariffa</Emphasis> Calyces to Control Aichi Virus

Aqueous Hibiscus sabdariffa extracts possess antimicrobial properties with limited information available on their antiviral effects. Aichi virus (AiV) is an emerging foodborne pathogen that causes gastroenteritis. Vaccines are currently unavailable to prevent their disease transmission. The objective of this study was to determine the antiviral effects of aqueous H. sabdariffa extracts against AiV. AiV at ~5 log PFU/ml was incubated with undiluted (200 mg/ml), 1:1 (100 mg/ml) or 1:5 (40 mg/ml) diluted aqueous hibiscus extract (pH 3.6), phosphate-buffered saline (pH 7.2 as control), or malic acid (pH 3.0, acid control) at 37 °C over 24 h. Treatments were stopped by serially diluting in cell-culture media containing fetal bovine serum and titers were determined using plaque assays on confluent Vero cells. Each treatment was replicated thrice and assayed in duplicate. AiV did not show any significant reduction with 1:1 (100 mg/ml) or 1:5 (40 mg/ml) diluted aqueous hibiscus extracts or malic acid after 0.5, 1, or 2 h at 37 °C. However, AiV titers were reduced to non-detectable levels after 24 h with all the three tested concentrations, while malic acid showed only 0.93 log PFU/ml reduction after 24 h. AiV was reduced by 0.5 and 0.9 log PFU/ml with undiluted extracts (200 mg/ml) after 2 and 6 h, respectively. AiV treated with 1:1 (100 mg/ml) and 1:5 (40 mg/ml) diluted extracts showed a minimal ~0.3 log PFU/ml reduction after 6 h. These extracts show promise to reduce AiV titers mainly through alteration of virus structure, though higher concentrations may have improved effects.     

Reduction of Enteric Viruses by Blueberry Juice and Blueberry Proanthocyanidins

Blueberry and blueberry extracts are known for their health benefits and antimicrobial properties. Natural therapeutic or preventive options to decrease the incidences of foodborne viral illnesses are becoming popular and being researched. This study aimed to determine the antiviral effects of blueberry juice (BJ) and blueberry proanthocyanidins (BB-PAC, B-type PAC structurally different from A-type PAC found in cranberries) against the infectivity of hepatitis A virus (HAV) and human norovirus surrogates (feline calicivirus (FCV-F9) and murine norovirus (MNV-1)) at 37 °C over 24 h using standard plaque assays. Viruses at ~5 log PFU/ml were mixed with equal volumes of BJ (pH 2.8), neutralized BJ (pH 7.0), BB-PAC (1, 2, 4, and 10 mg/ml), malic acid (pH 3.0), or phosphate-buffered saline (pH 7.2) and incubated over 24 h at 37 °C. Each experiment was carried out in duplicate and replicated thrice. FCV-F9 titers were found to be reduced to undetectable levels with 1 and 2 mg/ml BB-PAC after 5 min, with 0.5 mg/ml BB-PAC after 1-h, and with BJ after 3-h. MNV-1 titers were reduced to undetectable levels after 3 h with 1, 2, and 5 mg/ml BB-PAC and after 6 h with BJ. HAV titers were reduced to undetectable levels after 30 min with 2 and 5 mg/ml BB-PAC, after 3 h with 1 mg/ml BB-PAC, and by ~2 log PFU/ml with BJ after 24-h. BB-PAC shows preventive potential against infection by the tested enteric viruses in a dose- and time-dependent manner, although further in vitro studies in model food systems and in vivo studies using animal models are warranted.     

Enhanced Mineralization of PLA Meltblown Materials Due to Plasticization

Polylactic acid (PLA) is one of the important biodegradable polymers. It is widely used in many industrial applications such as films and fibers. Its biodegradability is based on data derived mostly from composting processes. For a broad application of the PLA material in personal care products, an understanding of anaerobic biodegradability is essential because soiled personal care products are usually disposed of in sanitary landfills, where biodegradability mechanisms are predominately in anaerobic conditions. Extensive laboratory results are acquired to elucidate the effects of the temperature on the PLA anaerobic sludge biodegradation. When the temperature is higher than PLA glass transition temperature (T_g), anaerobic degradation is accelerated. A plausible mechanism to explain this observation is that amorphous part of the polymer is easily accessible by microorganisms. When the degrading temperature is below PLA glass transition temperature, sample mineralization under anaerobic conditions is apparently slowed. The mechanisms elucidated by T_g modification can be utilized to control the rate of PLA biodegradation for sustainable waste management.