Active biomonitoring of heavy metal pollution using Rosa rugosa plants

The purpose of this work was to evaluate the quality of a rural area near Faenza (Italy) by using an active biomonitoring approach, i.e., by placing homogeneous individuals of the perennial shrub Rosa rugosa in different sites throughout the area. Further sites, within the city or its environs, were used for comparison. Soil and leaves of R. rugosa were analyzed for their heavy metal content. The total heavy metal pattern of leaves closely paralleled the pattern registered in soil, with the highest content (both in total and assimilable forms) at the site in the urban area, which is exposed to heavy traffic. Pollen quality (abortiveness and viability) was also tested as a potential indicator of pollution. Pollen abortiveness was strictly related to Pb levels in leaves, while viability was inversely related to leaf Cr content. Our results suggest that R. rugosa has the potential to be a good biomonitoring system.     

Influence of water pollution on the growth and pigment concentration of the microalgae <Emphasis Type="Italic">Phaeodactylum tricornutum</Emphasis> Bohlin (Bacillariophyta)

The aim of the work was to study the influence of the water taken from one of the most polluted parts of the Peter the Great Bay (the Japan Sea), the Nakhodka Bay, on the growth and chlorophyll a concentration in the cells of microalga P. tricornutum Bohlin (Bacillariophyta). The estimation of the dynamics of cell number growth and chlorophyll a concentration in the cells of microalga grown in the water from the Nakhodka Bay was made. At the same time, in 2007–2008, the main hydrochemical parameters, such as water salinity, dissolved oxygen concentration, BOD₅, organic and mineral phosphates concentration, anionic surfactants, and total petroleum hydrocarbons, were determined. It is shown that in July 2007, when most hydrochemical parameters were lower than the maximum permissible level, the culture growth and chlorophyll a contents in the cells did not differ from the control for certain. In other seasons these indices differed greatly from the control. The positive correlation between the concentration of dissolved oxygen, phosphates, petroleum hydrocarbons, and the number of microalga cells, grown in the water from the Nakhodka Bay, was shown.     

Airborne exposure to chemical substances in hairdresser salons

Several studies indicate health problems among hairdressers to be related to their chemical exposure at work. The purpose of this study was to describe the exposure of chemical compounds in the air of Spanish hairdresser salons, and to study differences between salons in central and suburban areas. Ten hairdresser salons were examined for two days, by recording number and type of customers, ventilation and size of salon. Both stationary and personal borne samples for organic compounds were collected, as well as stationary samples of ammonia. TVOC was calculated. Air temperature, relative humidity, CO and CO2 were logged for 48 h in each salon. Fifty-six personal and 28 stationary samples were analysed for organic compounds. Thirty-five different air-borne compounds were found in the working environment of the hairdressers. All levels were well below the limit values in Spain and USA, both for ammonia and organic compounds. TVOC ranged from 48.37 mg/m3 to 237.60 mg/m3, meaning that many salons had levels above suggested comfort values of 25. There were only minor differences in exposure between central and suburban salons. No salons had ventilation systems, and the CO2 was increasing during the day. The exposure was higher for several chemical compounds when hair dying was performed. Hairdressers were exposed to low air levels of a large number of chemical substances mostly related to work related to hair dying. There were no differences between exposure levels in salons in central and suburban areas.     

Error propagation in pesticide residue measurements estimated by computational simulations and inter-laboratory sample analysis

An assessment of the error associated with conventional pesticide residue analysis has been conducted based on computer simulations and inter-laboratory residue analysis. Computational simulations were conducted based on (i) typical performance and regulatory acceptance criteria of analytical methods, and (ii) field residue distributions. In addition, field samples with incurred residues were sent to different private laboratories and the results compared. The relative difference in pesticide residues obtained when samples from the same field or produce lot are analyzed at separate laboratories was used to quantify the uncertainty associated with residue analyses performed using common analytical technology, and methods that are in compliance with current regulatory requirements. The study showed that differences of > 100% are common and should be expected when samples from the same crop are analyzed at different laboratories. The results also suggest that the error within residue measurements can be particularly detrimental when a result is reported near the maximum residue limit (MRL).     

Distribution of polychlorinated biphenyls in both products and by-products of a mussel shell incinerator facility

Purpose  

Solid waste incineration has recently attracted much attention because the combustion process involved produces highly toxic organohalogen contaminants such as dioxin-like polychlorinated biphenyls (DL-PCBs) present in fly ash. This has raised the need for simple, rapid, accurate methods for monitoring PCBs in ash samples.     

Is phytoremediation a sustainable and reliable approach to clean-up contaminated water and soil in Alpine areas?

Background, aim and scope  

Phytoremediation does exploit natural plant physiological processes and can be used to decontaminate agricultural soils, industrial sites, brownfields, sediments and water containing inorganic and organic pollutants or to improve food chain safety by phytostabilisation of toxic elements. It is a low-cost and environment friendly technology targetting removal, degradation or immobilisation of contaminants. The aim of the present review is to highlight some recent advances in phytoremediation in the Alpine context.     

PCDD/Fs atmospheric deposition fluxes and soil contamination close to a municipal solid waste incinerator

Bulk depositions and surface soil were collected in a suburban area, near the Adriatic Sea, in order to assess the contribution of a municipal solid waste incinerator to the area’s total contamination with polychlorinated dibenzodioxins and polychlorinated dibenzofurans (PCDDs and PCDFs). Samples were collected at two sites, situated in the area most affected by plant emissions (according to the results of the Calpuff air dispersion model), and at an external site, considered as a reference. Results show that the studied area is subject to low contamination, as far as these compounds are concerned. Deposition fluxes range from 14.3 pg m⁻² d⁻¹ to 89.9 pg m⁻² d⁻¹ (0.75 pg-TEQ m⁻² d⁻¹ to 3.73 pg-TEQ m⁻² d⁻¹) and no significant flow differences are observed among the three monitored sites. Total soil concentration amounts to 93.8 ng kg⁻¹ d.w. and 1.35 ng-TEQ kg⁻¹ d.w, on average, and confirms a strong homogeneity in the studied area. Furthermore, from 2006 to 2009, no PCDD/Fs enrichment in the soil was noticed. Comparing the relative congener distributions in environmental samples with those found in stack emissions from the incineration plant, significant differences are observed in the PCDD:PCDF ratio and in the contribution of the most chlorinated congeners. From this study we can conclude that the incineration plant is not the main source of PCDD/Fs in the studied area, which is apparently characterized by a homogeneous and widespread contamination situation, typical of an urban area.     

Metal sorption by peat and algae treated peat: kinetics and factors affecting the process

The article presents a new approach that can be used for the purification of water contaminated by heavy metals. The treatment of peat with microalgae showed to be an effective way of increasing metal uptake by peat. Metal sorption was studied for a multimetal solution containing Cu, Cd, Ni, Zn, Cd, and Pb. Cu and Pb were found to be the metals having the highest affinity to peat. Water hardness has a strong effect on the uptake of borderline metals (Cd, Ni, Zn, Cd) from a solution. The use of algae for peat treatment resulted in less time to reach an equilibrium (24 h vs. 72 h for pure peat), and the effect of water hardness (Ca²⁺) on metal uptake was considerably reduced. Both peat and algal-treated peat were able to take up metals from rather acidic solutions (pH 3.0). pH had less influence on the metal uptake compared with water hardness. The affinity of heavy metals to peat was the following: Pb > Cu > Ni > Cd > Zn > Co. It slightly changed to Pb > Cu > Ni > Cd ≈ Co ≈ Zn when the combined sorbent, peat treated with microalga, was applied.     

Bioconcentration of two pharmaceuticals (benzodiazepines) and two personal care products (UV filters) in marine mussels (Mytilus galloprovincialis) under controlled laboratory conditions

Bioaccumulation is essential for gaining insight into the impact of exposure to organic micropollutants in aquatic fauna. Data are currently available on the bioaccumulation of persistent organic pollutants, but there is very little documentation on the bioaccumulation of pharmaceuticals and personal care products (PPCPs). The bioconcentration of selected PPCPs was studied in marine mussels (Mytilus galloprovincialis). The selected PPCPs were two organic UV filters, i.e., 2-ethylhexyl-4-trimethoxycinnamate (EHMC) and octocrylene (OC), and two benzodiazepines (BZP), i.e., diazepam (DZP) and tetrazepam (TZP). Laboratory experiments were performed in which M. galloprovincialis was exposed to these compounds either directly from water, for the less lipophilic substances (BZP) or via spiked food for lipophilic UV filters. M. galloprovincialis uptook and eliminated BZP following first-order kinetics. The biological half-life (t (1/2)) of TZP was 1.4?days, resulting in a bioconcentration factor of 64 and 99?mL?g(-1) dry weight (dw), respectively, for 2.3 and 14.5?μg?L(-1) of exposure, while the biological half-life (t (1/2)) of DZP was 0.4?days, resulting in a bioconcentration factor of 51?mL?g(-1) dw for 13.2?μg?L(-1) of exposure. The uptake of UV filter was rapid in mussels, followed by elimination within 24?h. EHMC increased from 15 to 138?ng?g(-1) dw in 1?h and decreased to 25?ng?g(-1) after 24?h for 11.9?μg?L(-1) exposure. OC reached 839?ng?g(-1) dw after 1?h and decreased to 33?ng?g(-1) after 24?h for 11.6?μg?L(-1) exposure. However, EHMC and OC were slightly accumulated in 48?h, i.e., 38 and 60?ng?g(-1) dw, respectively.     

Ozone tolerance in Phaseolus vulgaris depends on more than one mechanism

Two bean cultivars with different sensitivity to ozone, i.e. the O₃-sensitive Cannellino and the O₃-tolerant Top Crop, were exposed to acute O₃-stress (165 nL L⁻¹) with the aim of evaluating physiological and biochemical traits that may confer O₃-tolerance. Stomatal conductance was smaller and the ability to dissipate excess energy, via regulated and unregulated nonphotochemical quenching mechanisms was greater in Top Crop than in Cannellino. These morphological and physiological-traits allowed the O₃-tolerant cultivar to compensate for the light-induced declines in Φ_PSII, to preserve photosystem II from excitation-energy, and likely to prevent the generation of ROS to a superior degree than the O₃-sensitive cultivar. Furthermore, the potential capacities to reducing the superoxide anion and H₂O₂ were significantly greater in Top Crop than in Cannellino. These findings are consistent with the early accumulation of H₂O₂, the almost complete disruption of cell structure, and irreversible damages to the photosynthetic apparatus observed in the O₃-sensitive cultivar.