Combined use of molecular biology taxonomy, Raman spectrometry, and ESEM imaging to study natural biofilms grown on filter materials at waterworks

DNA-based population analysis was applied in combination with Raman spectrometry and Environmental Scanning Electron Microscopy for the characterisation of natural biofilms from sand and activated carbon filters operated for a long term at a municipal waterworks. Whereas the molecular biology polymerase chain reaction combined with denaturing gradient gel electrophoresis approach provides a deeper insight into the bacterial biofilm diversities, Raman spectrometry analyses the chemical composition of the extracellular polymer substances (EPS), microorganisms embedded in EPS as well as other substances inside biofilm (inorganic compounds and humic substances). Microscopy images the spatial distribution of biofilms on the two different filter materials. In addition, bacterial bulk water populations were compared with biofilm consortia using the molecular fingerprint technique mentioned.Population analysis demonstrated the presence of more diverse bacterial species embedded in a matrix of EPS (polysaccharides, peptides, and nucleic acids) on the sand filter materials. In contrast to this, activated carbon granules were colonised by reduced numbers of bacterial species in biofilms. Besides α-, β-, and γ-Proteobacteria, a noticeable specific colonisation with Actinobacteria was found on activated carbon particles. Here, the reduced biofilm formation came along with a decreased EPS synthesis. The taxonomy profiles of the different biofilms revealed up to 60% similarity on the same filter materials and 32% similarity of different materials. Similarity of adherent communities from filter materials and bulk water populations from the filter effluent varied between 36% and 58% in sand filters and 6–40% in granular activated carbon filters.The biofilm investigation protocols are most crucial to subsequent acquisition of knowledge on biofilm dynamics and bacterial contributions to transformation or adsorption processes in waterworks facilities.     

Kinetics of carbon degradation and PCDD/PCDF formation on MSWI fly ash

The native carbon oxidation and PolyChloroDibenzo-p-Dioxins and PolyChloroDibenzoFurans, PCDD/F, formation were simultaneously studied at different temperatures (230-350 degrees C) and times (0-1440 min) in order to establish a direct correlation between the disappearance of the reagent and the formation of the products. The kinetic runs were conducted in an experimental set up where conditions were chosen to gain information on the role of fly ash deposits in cold zones of municipal solid waste incinerators in PCDD/F formation reaction. The carbon oxidation measured as the decrease of total organic carbon of fly ash was in agreement with the carbon evolved as sum of CO and CO(2). The carbon mass balance indicated an increase in the efficiency of carbon conversion in CO and CO(2) with temperature. The CO and CO(2) formation was the result of two parallel pseudo first order reactions thus giving significant information about the reaction mechanism. PCDD/F formation as a function of temperature showed that the maximum formation was achieved in a narrow range around 280 degrees C; the time effect at 280 degrees C was a progressive formation increase at least up to 900 min. The PCDF:PCDD molar ratio increased with temperature and time, and the most abundant homologues were HxCDD, HpCDD, OCDD for PCDD, and HxCDF, HpCDF within PCDF. These experimental results supported the hypothesis that the formation mechanism was the de novo synthesis.     

Simplified determination of lipophilic metabolites of nonylphenol ethoxylates: method development and application in aqueous samples from Buenos Aires, Argentina

In the present work we have developed an analytical methodology for the determination of nonylphenol (NP) and nonylphenol mono- and di-ethoxylates (NP1EO and NP2EO) in water samples. The applicability of this methodology was proved by means of the analysis of environmentally relevant aqueous samples from Buenos Aires. This constitutes a starting point for a rigorous assessment of the incidence of NPnEO surfactants in Argentina, as only very few, qualitative or semi-quantitative data on the occurrence of these compounds in local systems were available up to this time. Enrichment of the analytes was carried out by solid-phase extraction on a C-18 sorbent, followed by elution with ethyl acetate. Normal-phase high performance liquid chromatography on an amino-silica column and fluorescence detection at excitation-emission wavelengths of 230-300 nm were employed for separation and quantification of the analytes. Confirmation of peak assignment in selected real samples was performed by off-line coupling HPLC with GC-MS analysis. A non-polar GC capillary column was used, and a characteristic peak pattern was obtained for the alkyl chain isomers of each ethoxylated homologue and NP. GC-MS analyses yielded in all cases purity levels higher than 80% for the HPLC collected fractions. The elevated concentrations found for the estrogenic metabolites of NPnEO are in accordance with an unrestricted use of this class of non-ionic surfactants in the country.     

Lettuce plants as bioaccumulators of trace elements in a community of central Italy

A survey, based on the use of vascular plants to describe the distribution of selected elements (21 in total) was performed in 11 sites in the area of Castelfiorentino (Tuscany, Central Italy) differing for land use, from urban to industrial and rural areas. Lettuce plants grown under standardized conditions were positively used as biodeposimeters of airborne trace elements. Washing was found to be highly significant in reducing concentrations of many elements in the samples, suggesting a general surface contamination of leaves. The typical crustal element Al showed good correlations with Co, Fe, Li and V; on the contrary, Zn and Cd were intercorrelated and showed no connection with crustal indicators. Lead was still a relevant environmental presence, as the experiments were carried out before the ban of leaded gasoline. Source apportionment by factor analysis put in evidence a major contribution of crustal materials, followed by man-related activities; a minor role was ascertained for marine aerosol. A comparison was made between analytical data of lettuce plants grown in our experimental sites and a bulk of commercial lettuce purchased at a local supermarket. It should be stressed how Cu concentrations of commercial material were significantly higher than those found in our plants; this is likely caused by phytosanitary treatments.     

Ability of fungi to degrade synthetic polymer nylon-6

Fifty-eight fungi have been tested for their ability to degrade a recalcitrant synthetic polymer polyamide-6, generally known as nylon-6. Most of them were isolated from a factory producing nylon-6. After preliminary screening, 12 strains were selected for submerged culture in a medium with nylon fibres as the only N-source. No degradation was observed with the isolates from the factory. Wood degrading fungi from a culture collection, however, degraded nylon after incubation for several weeks. Bjerkandera adusta disintegrated the fibres most efficiently, starting with the small transverse grooves, which deepened into cracks. The superficial layers crumbled to leave a thin inner core of the fibre, which finally broke down into fragments. The remaining insoluble part of the nylon showed a decrease in number average molecular mass from 16900 to 5600 during a 60-day incubation. Its thermal properties, such as shifts in melting points and broadening of the melting endotherms, were altered. The reduction of the amount of nylon and the composition of the liquid phase indicated that part of the polymer was degraded into soluble products. After 50 days, the total nitrogen content of the soluble fraction was 10-fold higher than in the control sample. Manganese peroxidase, presumably responsible for the degradation, was detected in the liquid phase. The study shows that only white rot fungi are able to break down nylon-6. For the first time this polymer was shown to be disrupted by B. adusta. The extent of the biodegradation indicates its potential for application in nylon waste reduction.     

Determination of selected quaternary ammonium compounds by liquid chromatography with mass spectrometry. Part I. Application to surface, waste and indirect discharge water samples in Austria

A method for simultaneous quantitative determination of alkyl benzyl, dialkyl and trialkyl quaternary ammonium compounds (QACs) has been developed, validated and subsequently applied to real water samples in Austria. The method employs liquid-liquid extraction (LLE) followed by liquid chromatography/tandem mass spectrometry (LC-MS/MS), using electrospray ionization (ESI) in positive mode. The overall method quantification limits range from 4 to 19ng/L for the enrichment of 500mL water samples and analyte recoveries are between 80 and 99%. The method was applied to 62 of the respective water samples without filtration to avoid the loss of the analytes due to the high adsorption capacity of these compounds. Maxima in the mg/L range, especially in the wastewater of hospitals and laundries, could be detected for the selected target compounds.     

Vegetable and synthetic tannins induce hormesis/toxicity in sea urchin early development and in algal growth

Mimosa tannin and phenol-based synthetic tannin (syntan) were tested for toxicity to sea urchin (Paracentrotus lividus and Sphaerechinus granularis) early development and to marine algal growth (Dunaliella tertiolecta). Sea urchin embryogenesis was affected by vegetable tannin and syntan water extracts (VTWE and STWE) at levels >or=1mg/L. Developmental defects were significantly decreased at VTWE and STWE levels of 0.1 and 0.3mg/L when control cultures displayed suboptimal quality, i.e. <70% "viable" (normal or retarded) larvae. Fertilization success of sea urchin sperm was increased up to 0.3 mg/L STWE or VTWE, then was inhibited by increasing tannin levels (1-30 mg/L). Offspring abnormalities, following sperm exposure to VTWE or STWE, showed the same shift from hormesis to toxicity. Cell growth bioassays in D. tertiolecta exposed to VTWE or STWE (0.1-30 mg/L) showed non-linear concentration-related toxicity. Novel criteria are suggested in defining control quality that should reveal hormetic effects.     

Increased thyroid volume, prevalence of thyroid antibodies and impaired fasting glucose in young adults from organochlorine cocktail polluted area: outcome of transgenerational transmission?

In 137 females (F) and 94 males (M) aged 21-35 years from organochlorines (OCs) polluted area (POLL) increased thyroid volume (ThV), prevalence of antibodies to thyroperoxidase (TPOab), thyrotropin receptor (TRab) and of impaired fasting glucose (IFG) was found compared to 116 F and 107 M from background pollution area (BCGR). In F and M from POLL also strikingly increased level of PCBs, DDE and HCB was found. Such findings were compared to the generation of their parents aged 41-55 years consisting of 320F/213M from POLL and 406F/231M from BCGR. However, in spite of strikingly lower level of those OCs in young adults from POLL, they showed about the same prevalence of adverse health signs as the old generation. From such reason 44 young F and 40 young M with lowest PCBs level from POLL were selected to obtain nearly the same PCB level as found in all young F and M from BCGR. In such PCB adjusted groups the prevalence of TPOab, TRab, IFG and increased ThV was still significantly higher than that in all young subjects from BCGR. At the same time, also the level of DDE and HCB in such PCBs adjusted groups was considerably lower. It was concluded that such adverse effects in young adults from POLL possibly did not result from their actual OCs levels, but very likely from their exposure to high OCs levels of their mothers during their prenatal and perinatal life. Thus, the data may be compatible with present views on transgenerational transmission of endocrine disruptors action.     

Concentration of bioactive compounds in mussels Mytilus galloprovincialis as an indicator of pollution

The polycyclic aromatic hydrocarbons (PAHs), polychlorinated biphenyls (PCBs) and organotins were analyzed in mussels Mytilus galloprovincialis from polluted and unpolluted sites from Mokpo Bay, Korea. The total PAH's concentrations (10(-3)mgkg(-1)) measured by GC-MS were in the range from 31+/-23 to 1+/-1. Among the eight PAHs the predominant ones were fluoranthene, phenanthrene and pyrene and accounted approximately 63% of the total PAHs. Among the four detected PCBs the highest content was of PCB 153, which accounted about 47% of the total PCBs. The main organotin compounds were dibutyltindichloride (DBT) and tributyltinchloride (TBT) and their composition was approximately 33% and 24%. PAHs, PCBs and organotins were found only in the mussels from polluted site. The antioxidant activity by ABTS [2,2'-azinobis (3-ethylbenzothiazoline-6-sulfonic acid)] test was higher in mussels from polluted than from unpolluted sites (P<0.05). It was found a correlation between the determined compounds (PAHs, PCBs and organotins) and the antioxidant activity of the mussel tissue from polluted site and the correlation coefficients were 0.96, 0.92 and 0.80, respectively. Such correlation can be explained by the properties of mussels. Since the mussel cell wall and tissues are hydrophobic, they can concentrate a number of hydrophobic pollutants like PAHs and PCBs from the marine environment by solubility rules. On the other hand, proteins are lipophilic compounds having antioxidant properties. Certain amino acid residues and thiol (-SH) groups, contained in proteins, respond to the ABTS antioxidant activity assay. Thus there may be a correlation between the total antioxidant activity of the organism and the PAH-PCB pollutants which were concentrated from its environment. The studied properties of mussels from polluted site can be used as an additional indicator of pollution.