Effect of acid rain on building material of the El Tajín archaeological zone in Veracruz, Mexico

Three limestone slabs (approx. 20 cm2 each) were extracted from the El Tajin archaeological zone in Veracruz, Mexico. X-ray diffraction analysis revealed three components: calcite (81.2%), quartz (17.9%) and feldspar (0.9%). Calcite content by x-ray diffraction analysis was slightly higher than that determined by chemical reaction between the limestone sample and nitric acid. The latter analysis, carried out in triplicate, yielded a calcite content of 77.1%. Mean water absorption, density and porosity of the limestone samples were also determined. Dissolution of limestone samples was investigated using an experimental rainfall simulation chamber, in which the stone samples were irrigated with artificial rain matching the pH and the ionic composition with 40 rainfall samples collected at El Tajin from August 18, 2002, to April 9, 2003. According to calcium and bicarbonate net concentrations found in the effluent of the chamber, a chemical mechanism by which limestone at El Tajin is dissolved by acid rain is proposed. A model used to investigate the air transport pathways corresponding to precipitation events at El Tajin shows that air parcels come mainly from the Gulf of Mexico, although no directional preference is evident for acidic vs. non-acidic events.     

Phytoavailability and fractions of iron and manganese in calcareous soil amended with composted urban wastes

Little is known about the effects of applying composted urban wastes on the phytoavailability and distribution of iron (Fe) and manganese (Mn) among chemical fractions in soil. In order to study this concern several experiments in pots containing calcareous soil were carried out. The received treatments by adding separately two rates (20 and 80 Mg ha-1) of municipal solid waste (MSW) compost and/or municipal solid waste and sewage sludge (MSW-SS) co-compost. The cropping sequence was a lettuce crop followed by a barley crop. It was observed that treatments amended with composted urban wastes tended to promote slight increases in lettuce yield compared to the control. The highest Fe levels in lettuce were found when higher rates of MSW-SS co-compost were applied; these values were significant compared to those obtained in the other treatments. In all cases, the application of organic materials increased the concentration and uptake of Mn in lettuce compared to the control; however, these increases were significant only when higher rates of MSW compost were applied. The organic amendments had beneficial delayed effects on barley yields, showing, in most cases, significant increases compared to the control. In this context, treatments with MSW compost were found to be more effective than the equivalent treatments amended with MSW-SS co-compost. Compared to the control, composted urban wastes increased Fe concentration in straw and rachis, and decreased Fe concentration in barley grain. Similarly, a decreased concentration of Mn in the dry matter of barley crop grown in soils treated with composted urban wastes was observed.     

Is levoglucosan a suitable quantitative tracer for wood burning? Comparison with receptor modeling on trace elements in Lycksele, Sweden

Particle emissions from residential wood combustion in small communities in Northern Sweden can sometimes increase the ambient particle concentrations to levels comparable to densely trafficked streets in the center of large cities. The reason for this is the combination of increased need for domestic heating during periods of low temperatures, leading to higher emission rates, and stable meteorological conditions. In this work, the authors compare two different approaches to quantify the wood combustion contribution to fine particles in Northern Sweden: a multivariate source-receptor analysis on inorganic compounds followed by multiple linear regression (MLR) of fine particle concentrations and levoglucosan used as a tracer. From the receptor model, it can be seen that residential wood combustion corresponds with 70% of modeled particle mass. Smaller contributions are also seen from local nonexhaust traffic particles, road dust, and brake wear (each contributing 14%). Of the mass, 1.5% is explained by long-distance transported particles, and 2% derives from a regional source deriving from either oil combustion or smelter activities. In samples collected in ambient air, a significant linear correlation was found between wood burning particles and levoglucosan. The levoglucosan fraction in the ambient fine particulate matter attributed to wood burning according to the multivariate analysis ranged from < 2% to 50%. This is much higher than the fraction found in the emission from the boilers expected to be responsible for most emissions at this site (between 3% and 6%). A laboratory emission study of wood and pellet boilers gave 0.3% wt to 22% wt levoglucosan to particle mass, indicating that the levoglucosan fraction may be highly dependent on combustion conditions, making it uncertain to use it as a quantitative tracer under real-world burning conditions. Thus, quantitative estimates of wood burning contributions will be very uncertain using solely levoglucosan as a tracer.     

Investigation of the ultraviolet photolysis method for the determination of organic nitrogen in aerosol samples

The research objective was to adapt the ultraviolet (UV)-photolysis method to determine dissolved organic nitrogen (DON) in aqueous extracts of aerosol samples. DON was assumed to be the difference in total concentration of inorganic nitrogen forms before and after sample irradiation. Using a 2(2) factorial design the authors found that the optimal conversion of urea, amino acids (alanine, aspartic acid, glycine, and serine), and methylamine for a reactor temperature of 44 degrees C occurred at pH 2.0 with a 24-hr irradiance period at concentrations <33 microM of organic nitrogen. Different decomposition mechanisms were evident: the photolysis of amino acids and methylamine released mainly ammonium (NH4+), but urea released a near equimolar ratio of NH4+ and nitrate (NO3-). The method was applied to measure DON in the extracts of aerosol samples from Tampa, FL, over a 32-day sampling period. Average dissolved inorganic (DIN) and DON concentrations in the particulate matter fraction PM10 were 78.1 +/- 29.2 nmol-Nm(-3) and 8.3 +/- 4.9 nmol-Nm(-3), respectively. The ratio between DON and total dissolved nitrogen ([TDN] = DIN + DON) was 10.1 +/- 5.7%, and the majority of the DON (79.1 +/- 18.2%) was found in the fine particulate matter (PM2.5) fraction. The average concentrations of DIN and DON in the PM2.5 fraction were 54.4 +/- 25.6 nmol-Nm(-3) and 6.5 +/- 4.4 nmol-Nm(-3), respectively.     

Multi-technique characterization of a nuclear bomb particle from the Palomares accident

A January 1966 accident dispersed Pu and other nuclear bomb materials in the vicinity of Palomares, a village in southeastern Spain. Radioactive particles were identified in a soil sample collected in 1998 and analytical results obtained from one of the isolated particles are presented here. Isolation of the particle was performed using gamma-ray spectrometry and imaging plates. Scanning electron microscopy with X-ray microanalysis revealed the presence of U and Pu as well as Pb and Fe in the particle of approximately 10microm diameter. Radioisotopes of U, Pu, and Am were quantified using radiometric methods, inductively coupled plasma mass spectrometry and secondary ion mass spectrometry. The elevated (235)U/(238)U atom ratio indicates enriched U, and the Pu atom ratios are consistent with weapons-grade material. This work demonstrates that the analysis of individual particles provides information not available through bulk sample analysis.     

Post-depositional redistribution and gradual accumulation of 137Cs in a riparian wetland ecosystem in Sweden

After the Chernobyl accident, high activity concentrations of (137)Cs (>1 MBq m(-2)) were detected in a riparian swamp in the central-eastern part of Sweden. The objective of this study was to clarify the redistribution processes behind the accumulation of (137)Cs in the wetland. A mass balance budget of (137)Cs was calculated based on soil and sediment samples and reports in the literature. Results showed that accumulation occurred over several years. Of all the (137)Cs activity discharged between 1986 and 2002 from the upstream lake, 29% was estimated to be retained in the wetland. In 2003, measurements showed that 17 kBq m(-2) sedimented on the stream banks of the wetland. Continuing overbank sedimentation by spring flooding prolongs the time that the wetland will contain high activity concentrations of (137)Cs. Consequently, organisms living in wetlands serving as sinks for (137)Cs may become exposed over long time periods to high activity concentrations.     

Individual-based modelling of fishermen search behaviour with neural networks and reinforcement learning

A model to mimic the search behaviour of fishermen is built with two neural networks to cope with two separate decision-making processes in fishing activities. One neural network deals with decisions to stay or move to new fishing grounds and the other is constructed for the purpose of finding prey within the fishing areas. Some similarities with the behaviour of real fishermen are found: concentrated local search once a prey has been located to increase the probability of remaining near a prey patch and the straightforward movement to other fishing grounds. The artificial fisherman prefers areas near the port when conditions in different fishing grounds are similar or when there is high uncertainty in its world. In the latter case a reluctance to navigate to other areas is observed. The artificial fisherman selects areas with higher concentration of prey, even if they are far from the port of departure, unless a high uncertainty is related to the fishing ground. Connected areas are preferred and followed in orderly fashion if a higher catch is expected. The observed behaviour of the artificial fisherman in uncertain scenarios can be described as a risk-averse attitude. The approach seems appropriate for an individual-based modelling of fishery systems, focusing on the learning and adaptive characteristics of fishermen and on interactions that take place at a fine scale.     

Managing safety in hydropower projects in emerging markets – Experiences in developing from a reactive to a proactive approach

International companies investing in emerging markets need to address the management of safety under varying conditions. The paper presents an evaluation of the approaches taken by an international hydropower company in two different construction projects, one in India and one in the Philippines. In the first project, the company had to intervene as a reaction to poor safety and overall performance. Based on previous experiences, the company selected a proactive approach in the second project, involving use of the contracting process to ensure adequate conditions from the start of construction and onwards. The paper accounts for the safety performance results in the two projects and interprets them in relationship to external and internal influencing factors in the respective project. It is concluded that a proactive approach has the potential of delivering satisfactory safety results at moderate costs for follow-up. A reactive approach risks exposing the company to ethical and reputation risks due to a poor safety performance before the corrective actions have taken full effect. It is also resource demanding. Results demonstrate the feasibility of turning around a project’s safety performance also when preconditions are challenging.