Predicting the compressibility behaviour of tire shred samples for landfill applications

Tire shreds have been used as an alternative to crushed stones (gravel) as drainage media in landfill leachate collection systems. The highly compressible nature of tire shreds (25-47% axial strain on vertical stress applications of 20-700 kPa) may reduce the thickness of the tire shred drainage layer to less than 300 mm (minimum design requirement) during the life of the municipal solid waste landfill. There hence exists a need to predict axial strains of tire shred samples in response to vertical stress applications so that the initial thickness of the tire shred drainage layer can be corrected for compression. The present study performs one-dimensional compressibility tests on four tire shred samples and compares the results with stress/strain curves from other studies. The stress/strain curves are developed into charts for choosing the correct initial thickness of tire shred layers that maintain the minimum thickness of 300 mm throughout the life of the landfill. The charts are developed for a range of vertical stresses based on the design height of municipal waste cell and bulk unit weight of municipal waste. Experimental results also showed that despite experiencing large axial strains, the average permeability of the tire shred sample consistently remained two to three orders of magnitude higher than the design performance criterion of 0.01cm/s for landfill drainage layers. Laboratory experiments, however, need to verify whether long-term chemical and bio-chemical reactions between landfill leachate and the tire shred layer will deteriorate their mechanical functions (hydraulic conductivity, compressibility, strength) beyond permissible limits for geotechnical applications.     

Processing of metallurgical residues by flotation - bench-scale studies on two industrial products

Resource recovery from two metallurgical residues by flotation was investigated applying an electrostatic model to select initial conditions. The first, a sulphation roast/water leach residue, was processed to float lead sulphate, comparing dodecylamine and xanthate collectors. From the second, a neutralization residue, gypsum, was recovered by reverse flotation of ferric hydroxide, comparing oleate and sulphonate collectors. In both cases, further upgrading by acid leaching was considered.     

芳香族化合物的生物降解途径

分析了以苯、甲苯、萘和联苯为代表的芳香族化合物的生物降解途径,发现其共同点都是经过两步加氧酶作用生成二醇,最后再开环;介绍了苯、甲苯、萘和联苯这几种芳香族化合物分解酶的组分、相对分子质量及其辅基。     

洪湖沼泽土及涝洼水稻土水生作物开发研究

简要介绍了洪湖湖区的生态环境，阐述了湖周沼泽土和涝洼水稻土的性质及其开发利用现状。还报导了作者在该湖湖周进行水生作物开发利用研究的结果     

Detection of Lead in Vegetables with New Chromogenic Reagent by Spectrophotometry

A new simple, rapid selective and highly sensitive chromogenic reagent dibromo-p-methyl-carboxyazo (DBMCA) was synthesized and studied in detail for the spectrophotometric detection of lead. In 0.25 M phosphoric acid medium, which greatly increases the selectivity, Lead reacts with DBMCA to form a 1:2 blue complex having a sensitivity absorption peak at 646 nm. Under optimal conditions, Beer's Law is obeyed over the range from 0.09 to 0.8 microg mL(-1) Pb (II) and the apparent molar absorptivity is 1.03 x 10(5) mL(-1) cm(-1). The detection limit and the variation coefficient were found to be 2.12 microg mL(-1) and 1.0% respectively. It is found that, except for Ca (II) and Ba (II) all foreign ions studied do not interfere with detection. The interference caused by Ca (II) and Ba (II) can be easily eliminated by prior extraction with potassiumiodide-methylisobutylketone. The proposed method has been applied successfully for to the detection of Lead in vegetable leaves with good results.