Challenges for modelling and integrating environmental performances in concept design: the case of an automotive component lightweighting

The objective of this paper is to discuss the main barriers for modelling and integrating the environmental performances in the automotive concept design. Incorporating environmental assessment in the early design phase of a vehicle component is known as an important challenge that car makers need to face in order to develop more sustainable design solutions; in this regard, the Life Cycle Assessment is the most widespread methodology for the environmental assessment and comparison of alternatives. The present work illustrates the combination of such methodology with the traditional design procedure at two different levels of the component design phase, material choice and concept design. In particular, the potential benefits originated by a lightweight solution for the automotive component Throttle Body are evaluated by considering environmental and technical implications at the same level. The case study shows that a multi-disciplinary approach for design effectively allows the integration of the environmental issue in the company’s established procedures. However, interpretation of results is still a challenging aspect due to the inevitable contradicting elements which should not discourage to develop comprehensive sustainability assessment within the early design stage.     

Discerning the factors explaining the change in energy efficiency

Due to the high rates of energy consumption and its impact on environment over the last decades, policy decision-makers are increasingly recognising the need to take actions that allow to address problems associated with the deployment of non-renewable resources and climate changes. One field of action has been the promotion of measures that contribute to improve energy efficiency of countries. The purpose of this study is to identify the main factors explaining changes in energy efficiency applying the multiplicative Log Mean Divisia Index decomposition method for a set of countries (Portugal, UK, Brazil and China) with different socio-economic background and energy mix. The results show that overall energy efficiency trends display different patterns between countries and the same happens within each country from a sectoral perspective. Major drivers of improvements of overall energy efficiency were the intensity effect and the affluence effect, whereas the driver that hampered those improvements was the energy consumption per capita. Some policy implications derived from the results achieved are: policy decision-makers should support measures that promote the adoption of energy-saving technologies resulting from new technological developments; policy measures should be directed to raise awareness of end-users regarding energy efficiency and energy conservation efforts; policy measures promoting economic growth through the development (or expansion) of sectors of activity that consume less energy can also be implemented; finally, policy instruments may also be used to reduce the costs of implementing energy efficiency and energy-saving measures to households and firms.     

Between Active Seekers and Non-Users: Segments of Science-related Media Usage in Switzerland and Germany

ABSTRACT

Citizens’ attitudes toward science are related to their use of science-related information from various sources. Evidence is scarce regarding citizens’ individual media repertoires for staying informed about science as segmentation studies so far have primarily focused on scientific attitudes. In this paper, we explore audience segments regarding their science-related information behavior and whether such segments are comparable or vary between two countries with similar information environments. Based on two surveys in Switzerland and Germany, we identify national audience segments that differ in their science-related information repertoires, and analyze their sociodemographic characteristics and science-related attitudes. In both countries, we find very comparable information user segments ranging from those who inform themselves frequently about science (“Active Seekers”/“Science Consumers”) to those who hardly get in contact with any information about science and research (“Non-Users”). Those segments which get in contact with information about science frequently show generally more positive attitudes.     

Concentration measurements of 7Be at ground level air at Palermo, Italy-comparison with solar activity over a period of 21 years

Air activity concentrations of (7)Be in Palermo determined for the period January 1995-December 2002 by gamma-ray spectrometric analysis of particulate samples collected on paper filter by a high-volume sampler (approximately 900 m(3) h(-1)) are reported. The temporal behaviour of (7)Be concentration presents the same characteristics already observed in the measurements carried out over the previous 13-year (1982-1994) investigated period. The mean value of 5.06 mBq m(-3) obtained from the analysis of the 4636 particulate samples collected from 1982 to 2002 can be considered a representative value of (7)Be air concentration at ground level in our geographical zone. The comparison of long-term variation in the (7)Be concentrations with the cyclic solar activity-extended to the whole period of 21 years-confirms the inverse correlation between the two quantities.     

Heavy metals in four fish species from the French coast of the Eastern English Channel and Southern Bight of the North Sea

Shallow coastal waters act as nurseries for various fish species and have been recognized as essential fish habitat. We studied heavy metal concentrations in four fish species (plaice, dab, flounder and cod) as an indicator of large-scale habitat quality. The study took place along the French coasts between the Eastern English Channel and the Southern Bight of the North Sea. All species show different concentrations of measured metals (e.g., Cd, Cu, Mn and Pb) in liver but not in muscle. The highest concentrations are found for the flounder and the lowest for cod which is consistent with their habitat and diet. Although our results do not highlight levels of appreciable pollution within the study area, inter-site differences are mainly observed in the muscle tissues and are generally in agreement with the known environmental data (e.g., anthropogenic pressure). However, in the Bay of Seine, one of the most contaminated estuaries in Europe, metal concentrations are in the same range or even lower than those found in fish collected from areas distant from any anthropogenic pressures. At one site, the comparisons of the Cd, Cu and Pb concentrations between healthy and diseased dabs have been carried out on the muscle and liver tissues. The results of this preliminary study show a relationship between metal concentrations and the pathological status of the fish. The use of fish health as indicator of habitat quality is discussed.     

The ecological effects of trichloroacetic acid in the environment

Trichloroacetic acid (TCAA) is a member of the family of compounds known as chloroacetic acids, which includes mono-, di- and trichloroacetic acid. The significant property these compounds share is that they are all phytotoxic. TCAA once was widely used as a potent herbicide. However, long after TCAA's use as a herbicide was discontinued, its presence is still detected in the environment in various compartments. Methods for quantifying TCAA in aqueous and solid samples are summarized. Concentrations in various environmental compartments are presented, with a discussion of the possible formation of TCAA through natural processes. Concentrations of TCAA found to be toxic to aquatic and terrestrial organisms in laboratory and field studies were compiled and used to estimate risk quotients for soil and surface waters. TCAA levels in most water bodies not directly affected by point sources appear to be well below toxicity levels for the most sensitive aquatic organisms. Given the phytotoxicity of TCAA, aquatic plants and phytoplankton would be the aquatic species to monitor for potential effects. Given the concentrations of TCAA measured in various soils, there appears to be a risk to terrestrial organisms. Soil uptake of TCAA by plants has been shown to be rapid. Also, combined uptake of TCAA from soil and directly from the atmosphere has been shown. Therefore, risk quotients derived from soil exposure may underestimate the risk TCAA poses to plants. Moreover, TCE and TCA have been shown to be taken up by plants and converted to TCAA, thus leading to an additional exposure route. Mono- and di-chloroacetic acids can co-occur with TCAA in the atmosphere and soil and are more phytotoxic than TCAA. The cumulative effects of TCAA and compounds with similar toxic effects found in air and soil must be considered in subsequent terrestrial ecosystem risk assessments.     

Estimation of internal radiation dose to the adult Asian population from the dietary intakes of two long-lived radionuclides

Daily dietary intakes of two naturally occurring long-lived radionuclides, 232Th and 238U, were estimated for the adult population living in a number of Asian countries, using highly sensitive analytical methods such as instrumental and radiochemical neutron activation analysis (INAA and RNAA), and inductively coupled plasma mass spectrometry (ICP-MS). The Asian countries that participated in the study were Bangladesh (BGD), China (CPR), India (IND), Japan (JPN), Pakistan (PAK), Philippines (PHI), Republic of Korea (ROK) and Vietnam (VIE). Altogether, these countries represent more than 50% of the world population. The median daily intakes of 232Th ranged between 0.6 and 14.4 mBq, the lowest being for Philippines and the highest for Bangladesh, and daily intakes of 238U ranged between 6.7 and 62.5 mBq, lowest and the highest being for India and China, respectively. The Asian median intakes were obtained as 4.2 mBq for 232Th and 12.7 mBq for 238U. Although the Asian intakes were lower than intakes of 12.3 mBq (3.0 ug) 232Th and 23.6 mBq (1.9 ug) 238U proposed by the International Commission on Radiological Protection (ICRP) for the ICRP Reference Man, they were comparable to the global intake values of 4.6 mBq 232Th and 15.6 mBq 238U proposed by the United Nation Scientific Commission on Effects of Radiation (UNSCEAR). The annual committed effective doses to Asian population from the dietary intake of 232Th and 238U were calculated to be 0.34 and 0.20 microSv, respectively, which are three orders of magnitude lower than the global average annual radiation dose of 2400 microSv to man from the natural radiation sources as proposed by UNSCEAR.     

The Response of Hydrophytes to Environmental Pollution with Heavy Metals

The effects of Cu²⁺, Cd²⁺, and Ni²⁺ at low and high concentrations (0.025 and 0.25 mg/ml) on the accumulation capacity, the state of the pigment complex, and photosynthesis rate have been studied in model experiments with three floating hydrophytes (Hydrocharis morsus-ranae L., Lemna gibba L., and Potamogeton natans L.) and four submerged hydrophytes (Elodea canadensis Michx., Lemna trisulka L., Ceratophyllum demersum L., and Potamogeton lucens L.). Copper and cadmium are especially toxic at the concentrations studied. The effect of Cu²⁺ was the strongest in hydatophytes, and the effect of Cd²⁺, in pleustophytes. It is hypothesized that the differences between hydrophytes with respect to accumulation of metals and decrease in photosynthesis rate may cause predominant elimination of submerged species. Therefore, changes in the species structure of hydrophyte communities may be expected in waters polluted with metals.     

On monitoring anthropogenic airborne uranium concentrations and (235)U/(238)U isotopic ratio by Lichen - bio-indicator technique

Lichens are widely used to assess the atmospheric pollution by heavy metals and radionuclides. However, few studies are available in publications on using lichens to qualitatively assess the atmospheric pollution levels. The paper presents research results applying epiphytic lichens as bio-monitors of quantitative atmospheric contamination with uranium. The observations were conducted during 2.5 years in the natural environment. Two experimental sites were used: one in the vicinity of a uranium contamination source, the other one - at a sufficient distance away to represent the background conditions. Air and lichens were sampled at both sites monthly. Epiphytic lichens Hypogimnia physodes were used as bio-indicators. Lichen samples were taken from various trees at about 1.5m from the ground. Air was sampled with filters at sampling stations. The uranium content in lichen and air samples as well as isotopic mass ratios (235)U/(238)U were measured by mass-spectrometer technique after uranium pre-extraction. Measured content of uranium were 1.45 mgkg(-1) in lichen at 2.09 E-04 microgm(-3) in air and 0.106 mgkg(-1) in lichen at 1.13 E-05 microgm(-3) in air. The relationship of the uranium content in atmosphere and that in lichens was determined, C(AIR)=exp(1.1 x C(LICHEN)-12). The possibility of separate identification of natural and man-made uranium in lichens was demonstrated in principle.     

Sequence analytical approach to the Upper Kimmeridgian-Lower Tithonian storm-dominated ramp deposits of the Boulonnais (Northern France). A landward time-equivalent to offshore marine source rocks

An interdisciplinary approach based on high-resolution physical stratigraphy, biostratigraphy, organic matter analysis and clay mineralogy has been applied to the mixed siliciclastic/carbonate Kimmeridgian/Tithonian deposits of the Boulonnais (north-western France). These rocks are the age-equivalents of some of the offshore marine source rocks of the North Sea and were deposited in an overall storm-dominated homoclinal ramp setting which may represent one of the most shore-proximal sediments of this age cropping out in north-western Europe. Comparison with data from the Yorkshire, Dorset, Lorraine and Aquitaine areas allows the discrimination of three major transgressive-regressive sediment packages with disconformities of interregional extent: (1) from the Baylei Zone to top Eudoxus Zone; (2) from the Autissiodorensis Zone to base Scitulus Zone; (3) from the upper Scitulus Zone to the Pectinatus Zone. The lower two regionally correlative disconformities correspond to the sequence boundaries at the top of the Eudoxus Zone and the top of the Autissiodorensis Zone, formed by high-frequency relative sea-level variations during the periods of maximum transgression of the platform. The latter disconformity (the P1 nodule bed) reflects a major tectonically induced reorganization of the north-west European intrashelf sedimentary basin, characterized by a shift in both the location of the main depocentre and the sources of sediment production.