Species richness and stand stability in conifer forests of the Sierra Nevada

Theoretical and empirical studies have long suggested that stability and complexity are intimately related, but evidence from long-lived systems at large scales is lacking. Stability can either be driven by complex species interactions, or it can be driven by the presence/absence and abundance of a species best able to perform a specific ecosystem function. We use 64 years of stand productivity measures in forest systems composed of four dominant conifer tree species to contrast the effect of species richness and abundance on three stability measures. To perform this contrast, we measured the annual growth increments of > 900 trees in mixed and pure forest stands to test three hypotheses: increased species richness will (1) decrease stand variance, (2) increase stand resistance to drought events, and (3) increase stand resilience to drought events. In each case, the alternate hypothesis was that species richness had no effect, but that species composition and abundance within a stand drove variance, resistance, and resilience. In pure stands, the four species demonstrated significant differences in productivity, and in their resistance and resilience to drought events. The two pine species were the most drought resistant and resilient, whereas mountain hemlock was the least resistant and resilient, and red fir was intermediate. For community measures we found a moderately significant (P = 0.08) increase in the community coefficient of variation and a significant (P = 0.03) increase in resilience with increased species richness, but no significant relationship between species richness and community resistance, though the variance in community resistance to drought decreased with species richness. Community resistance to drought was significantly (P = 0.001) correlated to the relative abundance of lodgepole pine, the most resistant species. We propose that resistance is driven by competition for a single limiting resource, with negative diversity effects. In contrast resilience measures the capacity of communities to partition resources in the absence of a single limiting resource, demonstrating positive diversity effects.     

Sucrose amendment enhances phytoaccumulation of the herbicide atrazine in Arabidopsis thaliana

Growth in the presence of sucrose was shown to confer to Arabidopsis thaliana (thale cress or mustard weed) seedlings, under conditions of in vitro culture, a high level of tolerance to the herbicide atrazine and to other photosynthesis inhibitors. This tolerance was associated with root-to-shoot transfer and accumulation of atrazine in shoots, which resulted in significant decrease of herbicide levels in the growth medium. In soil microcosms, application of exogenous sucrose was found to confer tolerance and capacity to accumulate atrazine in Arabidopsis thaliana plants grown on atrazine-contaminated soil, and resulted in enhanced decontamination of the soil. Application of sucrose to plants grown on herbicide-polluted soil, which increases plant tolerance and xenobiotic absorption, thus appears to be potentially useful for phytoremediation.     

Study of trace metal leaching from coals into seawater

The behaviour of three South African coals in water and, particularly in seawater, was examined. A sequential speciation procedure used to evaluate trace metal partitioning in coal has shown that trace metals will not be easily released from these coals into environmental ecosystems. Only a few trace elements are slightly leached from these coals into water or seawater at pH around 8. On the other hand, Mn is highly leached from these coals into water or seawater. It has been clearly shown that Mn concentrations are highly correlated to sulfate and calcium concentrations indicating that Mn is mainly solubilized into water simultaneously to gypsum; the leaching efficiency being severely reduced for coal having a high calcite content. The leaching percentage of Mn into seawater is enhanced by the presence of seawater salts that increases gypsum solubility. The leaching process of Mn from coal into water or seawater is governed by gypsum solubilization and is relatively rapid during the first thirty minutes, then very slow. In this study, it has been also shown that, depending on their physico-chemical properties, trace metals may be removed from seawater solutions in the presence of coal having a high calcite content. In this work, it has been also shown that some elements, particularly Fe, are greatly solubilized into seawater in the presence of a strong chelating agent like EDTA. Like for Mn, the leaching rate of metals from coal in the presence of EDTA is relatively rapid during the first 30 min then much slower, suggesting a solubilization process simultaneously to gypsum or/and calcite solubilization.     

Detection and quantification of chlordecone in contaminated soils from the French West Indies by GC-MS using the 13C10-chlordecone stable isotope as a tracer

Chlordecone is an organochlorine insecticide that has been widely used to control banana weevil in the French West Indies. As a result of this intense use, up to 20,000 ha are contaminated by this insecticide in the French West Indies, and this causes environmental damage and health problems. A scenario of exposure was drawn by French authorities, based on land usage records. Many efforts have been made to monitor the occurrence of chlordecone and its main metabolites using different analytical methods, including GC, GC/MS, LC/MS, and NIRS. Although these different methods allow for the detection and quantification of chlordecone from soils, none of them estimate the bottleneck caused by extraction of this organochlorine from soils with high adsorption ability. In this study, we used ¹³C₁₀-chlordecone as a tracer to estimate chlordecone extraction yield and to quantify chlordecone in soil extracts based on the ¹³C/¹²C isotope dilution. We report the optimization of ¹³C₁₀-chlordecone extraction from an Andosol. The method was found to be linear from 0.118 to 43 mg kg^?1 in the Andosol, with an instrumental detection limit estimated at 8.84 μg kg^?1. This method showed that chlordecone ranged from 35.4 down to 0.18 mg kg^?1 in Andosol, Nitisol, Ferralsol, and Fluvisol soil types. Traces of the metabolite β-monohydrochlordecone were detected in the Andosol, Nitisol, and Ferralsol soil samples. This last result indicates that this method could be useful to monitor the fate of chlordecone in soils of the French West Indies.     

A field evaluation of a piezo-optical dosimeter for environmental monitoring of nitrogen dioxide

Measurements of 8-hour time-weighted average NO(2) concentrations are reported at 7 different locations in the region of Dunkirk over 5 consecutive days using PiezOptic monitoring badges previously calibrated for the range 0-70 ppb together with data from chemiluminescent analysers in 5 sites (4 fixed and one mobile). The latter facilities also provided data on ozone and NO concentrations and meteorological conditions. Daily averages from the two pairs of badges in different types of sampling cover in each site have been compared with data from the chemiluminescent analysers, and found largely to agree within error margins of +/-30%. Although NO(2) and ozone concentrations were low, rendering detailed discussion impossible, the general features followed expected patterns.     

A general kinetic law for heavy metal vaporization during municipal solid waste incineration

Metal emissions from waste incineration plants become a great environmental concern because of their toxicity for both human health and environment. Metals are not destroyed by high-temperature thermal treatment and some vaporized metals may be emitted. It is thus essential to understand the release mechanism of metals during high-temperature waste treatment, in order to improve the understanding of their behavior and the control of their emission. The objective of this study is to identify the kinetic law for metal release from realistic artificial waste. The vaporization of three metals of most concern (Cd, Pb and Zn) during municipal waste incineration was studied. The vaporization rate at the particle level was determined from the experimental concentration profile in the outlet gas of a fluidized bed reactor, by using the inverse method that was previously developed and validated by our team. As a first step, the kinetic parameters were determined thanks to experiments carried out at several temperatures. Specific laws, for each studied metal, were thus obtained as a function of temperature. Nevertheless, it is very useful to identify all the experimental kinetic curves (all studied metals at all temperatures) to one single mathematical law. Therefore, a general kinetic law, expressing the solid matrix influence on the metal vaporization dynamic, was determined as a second step. It permits to predict the vaporization characteristic time and the time course of the metal concentration in the waste.     

Monotonic aspects of the mechanical behaviour of bottom ash from municipal solid waste incineration and its potential use for road construction

Municipal solid waste incineration (MSWI) bottom ash is an atypical granular material because it may include industrial by-products that result from the incineration of domestic waste. The prospects for the beneficial use of this particular material mainly lie in the field of road construction, as a substitute for the traditional natural aggregates. However, its mechanical properties are still little known, particularly in term of stiffness and deformability, characteristics that are essential to the construction of a durable roadway. The purpose of this paper is to describe better the mechanical behaviour of this recycled material. In order to reach this objective, a large experimental campaign is presented. The first part of this paper presents and comments in detail on the results obtained from static monotonic tests. Oedometric and triaxial shear tests were performed on MSWI bottom ash both before and after treatment with a specific hydraulic binder. These tests allow specification of the mechanical characteristics of the MSWI bottom ash, such as the initial Young's modulus, Poisson's ratio, the compressibility index, the friction angle, and the contracting or dilating behaviour of the material. The results reveal a mechanical behaviour similar to that of initially dense standard materials (sands, unbound granular materials) and a dependence on the applied average pressure, characteristic of the mechanical behaviour of granular media. More laboratory data on other samples of MSWI bottom ash are required to ensure that this comparison is statistically valid.     

Evidence for enhanced dissipation of chlorpyrifos in an agricultural soil inoculated with Serratia rubidaea strain ABS 10

The insecticide ¹⁴C-chlorpyrifos was found mineralized in a Tunisian soil with repeated exposure to it. From this soil, a bacterial strain was isolated that was able to grow in a minimal salt medium (MSM) supplemented with 25 mg L^?1 of chlorpyrifos. It was characterized as Serratia rubidaea strain ABS 10 using morphological and biochemical analyses, as well as 16S rRNA sequencing. In a liquid culture, the S. rubidaea strain ABS 10 was able to dissipate chlorpyrifos almost entirely within 48 h of incubation. Although the S. rubidaea strain ABS 10 was able to grow in an MSM supplemented with chlorpyrifos and dissipate it in a liquid culture, it was not able to mineralize ¹⁴C-chlorpyrifos. Therefore, it can be concluded that the dissipation capability of this bacteria might be attributed to its capacity to adsorb CHL. It can also be ascribed to other reasons such as the formation of biogenic non-extractable residues. In both non-sterile and sterile soil inoculated with S. rubidaea strain ABS 10, chlorpyrifos was more rapidly dissipated than in controls with DT₅₀ of 1.38 and 1.05 days, respectively.