Exchange of hosts: can agaonid fig wasps reproduce successfully in the figs of non-host <Emphasis Type="BoldItalic">Ficus</Emphasis>?

In the obligate mutualism between figs (Ficus) and their specific pollinators (Chalcidoidea, Agaonidae), each species of fig wasp typically reproduces in figs of a single host species. Host specificity is maintained largely because pollinators are attracted to tree-specific volatiles released from their host figs, but whether the wasps can reproduce if they enter figs of non-host species is unclear. We investigated the reproductive success of Ceratosolen emarginatus (associated with Ficus auriculata) and Ceratosolen sp. (associated with F. hainanensis) in atypical hosts by experimentally introducing foundresses into host and non-host figs. F. auriculata figs entered by Ceratosolen sp. were more likely to abort than if entered by C. emarginatus, but abortion of F. hainanensis figs was not affected by pollinator species. Single C. emarginatus foundresses produced more but smaller offspring in F. hainanensis than in their normal host. Conversely Ceratosolen sp. produced fewer but larger offspring in F. auriculata than in their normal host, probably as a result of having longer to develop. Mean style length differences, relative to the lengths of the wasps’ ovipositors, may have dictated the number of offspring produced, with oviposition made easier by the shorter styles in F. hainanensis figs. Our results imply that, in addition to morphological constraints and tree-specific volatiles, reduced reproductive success in atypical hosts can be another factor maintaining host specificity, but for other species only behavioural changes are required for host switching to occur.     

Ultrafine particle emission characteristics of diesel engine by on-board and test bench measurement

This study investigated the emission characteristics of ultrafine particles based on test bench and on-board measurements. The bench test results showed the ultrafine particle number concentration of the diesel engine to be in the range of (0.56-8.35) × 10⁸ cm^-3. The on-board measurement results illustrated that the ultrafine particles were strongly correlated with changes in real-world driving cycles. The particle number concentration was down to 2.0 × 10⁶ cm^-3 and 2.7 × 10⁷ cm^-3 under decelerating and idling operations and as high as 5.0 × 10⁸ cm^-3 under accelerating operation. It was also indicated that the particle number measured by the two methods increased with the growth of engine load at each engine speed in both cases. The particle number presented a "U" shaped distribution with changing speed at high engine load conditions, which implies that the particle number will reach its lowest level at medium engine speeds. The particle sizes of both measurements showed single mode distributions. The peak of particle size was located at about 50-80 nm in the accumulation mode particle range. Nucleation mode particles will significantly increase at low engine load operations like idling and decelerating caused by the high concentration of unburned organic compounds.     

兰州市大气中苯并(a)芘与儿童尿中1-羟基芘的分析及风险评价

对兰州市不同区域空气中苯并(a)芘和儿童尿液中1-羟基芘同步采样,分别采用气相色谱-质谱联用法和高效液相色谱法进行检测.结果表明:不同区域苯并(a)芘浓度有显著差别,研究区日均浓度约为对照区日均浓度的两倍.冬季大气中的浓度明显高于夏季,其中研究区冬季均值约为夏季的26.46倍,对照区冬季均值约为夏季的29.41倍.儿童尿中1-羟基芘的浓度与空气中苯并(a)芘的浓度呈一致的变化,冬季研究区儿童尿中1-羟基芘的均值为0.86μmol·(mol肌酐)-1,对照区为0.63μmol·(mol肌酐)-1.冬季研究区儿童的终生超额危险度最高,达到2.32×10-4,接近不可接受水平.     

长江上游地区泥石流灾害敏感性量化评价研究

泥石流敏感性分析对灾害分析评价预测具有重要作用。文章以长江上游为研究区,选择坡度、相对高差、地层岩性、年降雨量、地震烈度等5方面因素为评价因子,探讨运用GIS技术管理分析泥石流灾害信息和区域泥石流敏感性分析的方法。量化评价因子的作用分值大小,有效表达泥石流敏感性指数(DFSI),进而,结合空间分析与条件概率模型,实现了区域泥石流敏感性分析并制作了泥石流敏感性专题图。长江上游地区泥石流敏感性区域具有一定的规律性,高度敏感区主要分布在第一级阶梯与第二级阶梯的过渡地带,比较集中的区域有雅砻江中下游、安宁河、小江、普渡河、大渡河中下游、理塘河、白龙江、岷江上游、涪江上游等干支流的5～10 km范围内;中度敏感区主要分布在高度敏感区的外围约10～30 km范围内。利用历史泥石流资料验证,表明已经发生的泥石流主要分布在泥石流敏感性指数较高地区,说明敏感性分析的结果基本反映出研究区泥石流敏感性特性。     

铝钛改性MCM-41材料对污水中铅镉的吸附研究

研究了改性MCM-41材料对污水中重金属铅、镉离子的吸附行为。在MCM-41材料中加入Al、Ti两种诱因金属离子来合成新的Al-Ti-MCM-41及Ti-Al-MCM-41改性材料,通过氮气吸附-脱附等温线对Al-Ti-MCM-41(Al/Ti=1∶1)及Al-Ti-MCM-41(Al/Ti=2∶1)样品进行了表征,并采用改性后的MCM-41材料为吸附剂对含有二价铅、镉离子的溶液进行吸附实验,考察了吸附剂投加量,Pb2+、Cd2+初始质量浓度和吸附温度对吸附的影响。结果表明:改性Al-Ti-MCM-41(Al/Ti=1∶1)材料的最可几孔径和比孔容分别为16.68 nm和0.046 cm3/g,由BJH计算得到的平均孔径为17.02 nm;Al-Ti-MCM-41(Al/Ti=2∶1)的最可几孔径和比孔容分别为16.88 nm和0.083 cm3/g,由BJH计算得到的平均孔径为17.08 nm。Al-Ti-MCM-41(Al/Ti=1∶1)对Cd2+的吸附率为99.8%;Al-Ti-MCM-41(Al/Ti=2∶1)对Pb2+的吸附率为99.96%;Pb2+和Cd2+的吸附容量随吸附剂投加量的增加而降低,随离子初始浓度的增大而增加;温度越高越有利于吸附。该研究重点考察改性MCM-41材料在重金属铅镉离子污染治理中的性能,从而为解决重金属铅镉的污染,加强环境保护提供理论支撑和技术支持,具有明确的现实意义。     

“固化赤泥-人工膜”复合防渗材料研究

赤泥本身具有良好的防渗性能,加入石灰作为激发剂,更可提高其防渗性。根据《土工合成材料测试手册》和GB/T 50123—1999《土工试验方法标准》进行渗透试验,结果表明:室内试验在赤泥中加入8%石灰,并夹一层人工防渗膜形成的复合防渗材料,在固化28 d后,其渗透系数可达(7.3～7.4)×10-9 cm/s。在工业试验中,夹入不同厚度和质地的人工防渗膜的石灰(8%)固化赤泥,渗透系数可达到6.32×10-9～1.89×10-7 cm/s。研究成果在中原某铝厂赤泥堆场防渗工程中得到了应用。     

AMBBR工艺处理城市污水

通过对厌氧移动床生物膜反应器处理南方热带亚热带地区城市生活污水的试验研究,采用好氧-厌氧两个阶段进行挂膜试验以缩短挂膜时间,探讨了水力停留时间(HRT)、pH值、填料填充率对反应器处理效果的影响。试验结果表明:在HRT为12 h,进水ρ(COD)为300 mg/L,ρ(氨氮)为15 mg/L,50%的填料填充率,pH=7的工艺条件下,装置对COD去除率为51.2%,对氨氮去除率为40.8%,对TN去除率为38.1%。     

浅论通风隔声窗的发展

分析当前通风隔声窗的现状,以及通风隔声窗发展中的几个关键点,即:安静、节能、智能、清新空气、美观;结合正升声学公司开发的通风隔声窗产品讨论通风隔声窗在未来住宅建筑中的应用。     

SBR在高校中水回用领域的工程应用研究

采用SBR工艺对高校校园废水进行了处理,运行结果表明:废水中COD含量从200～360mg/L降至60mg/L以下,BOD5含量从70～110mg/L降至20mg/L以下,氨氮含量从60～80mg/L降至10mg/L以下,SS含量从75～160mg/L降至50mg/L以下,达到了北京市DB11307—2005《水污染物排放标准》的二级排放标准。     

放射源在线监控系统设计与应用

为了防止在使用放射源时发生脱落、丢失、超标使用、私自转移等情况,最大限度避免辐射安全事故,有必要设计建立放射源在线监控系统,对放射源放射性指标(辐射剂量率)及所处位置(经纬度)实行连续的自动监测。并通过各级监管平台设置放射源超标、异动等报警程序,全面提升放射源科学监管水平。