Air pollution and hospitalization in megacities: empirical evidence from Pakistan

Environmental Science and Pollution Research - Air pollution has become a threat to human health in urban settlements, ultimately leading to negative impacts on overall economic system as well....     

A comparative decision-making model for sustainable end-of-life vehicle management alternative selection using AHP and extent analysis method on fuzzy AHP

Environmental protection and sustainable development are getting increasing attention in the automobile industries. Environmental consciousness has increased, and sustainability has become an important requirement for the management of end-of-life vehicles (ELVs). The proper management of ELVs can bring improved sustainability performance for any society or organisation. There are several alternative options for ELVs management such as reuse, repair, reconditioning, remanufacturing and recycling. Environmental legislation is forcing original equipment manufacturers (OEMs) to manage their products at the end of their life cycle to reduce their potential environmental impact. An appropriate selection model for sustainable ELV management alternatives in the dynamic, competitive and regulatory environment can enable a firm to satisfy economic, environmental, social and technological requirements. This study proposes an integrated model to select the dimensions and criteria for evaluating sustainable alternatives for the proper management of ELVs. First, the Decision-Making Trial and Evaluation Laboratory (DEMATEL) method is used to select the most important dimensions and criteria for sustainable alternative selection. Next, a hierarchy has been constructed to develop a systematic technique to solve the alternatives selection problem. An analytic hierarchy process (AHP) and extent analysis method on the fuzzy AHP (FEAHP) model have been used based on the hierarchy to evaluate the most suitable alternatives from the sustainability point of view. The strength of the proposed model is that it compares the results of both methods, the imprecision of experts’ opinions is considered in the evaluation process and the model is easy to use.     

Seasonal variations of chlorophyll-a in Demirdöven Dam Reservoir (Erzurum, Turkey) in relation to phytoplankton density and environmental factors

The seasonal variations of Chlorophyll-a was examined in relation to phytoplankton density and physico-chemical factors in Demird?ven Dam Reservoir during 2000-2001. Chlorophyll-a concentrations ranged from 0.62 to 7.19 mg/m3 and from 0.67 to 8.88 mg/m3 in 2000 and 2001, respectively. Maximum Chlorophyll-a concentrations were found near the metalimnion and decreased with depth. Chlorophyll-a concentrations showed positive correlation to phytoplankton density, water temperature and nutrient concentrations, and negative correlations to Secchi depth. Demird?ven Dam Reservoir can be classified as a mesotrophic reservoir according to Chlorophyll-a concentrations.     

Artisan fishers’ perception of climate change and disasters in coastal Bangladesh

Climate change is affecting fishing communities across Bangladesh. While work has been undertaken to investigate the nature of these impacts, understanding how fishers perceive climate change at a local level, especially within developing countries, is crucial. This paper presents the results of a three-year study of the contextual determinants and dimensions of artisanal fishing community perceptions about climate change in coastal Bangladesh. Results of this study indicate that geographic characteristics, socio-economic status, worldviews, tradition, observations and disaster experiences are important determinants for shaping fishers’ perceptions about climate change. Fishers also demonstrate a long-standing tradition of risk adaptation strategies, but do not link them to climate change. We argue that these perceptions provide ideas for how to form appropriate climate responses at local levels not only in Bangladesh but other developing countries.     

Hepatic effects of yttrium oxide nanoflowers: in vitro risk evaluation

Yttrium oxide nanoflowers were prepared by a hydrothermal technique, and X-ray diffraction and scanning electron microscopy were used to determine their structures. The cytotoxic and genotoxic potentials of aqueous dispersions of the nanoflowers to cultured primary rat hepatocytes were examined at concentrations up to 500 mg L^?1 for 72 h. Cell viability was determined by monitoring the reduction of 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, release of lactate dehydrogenase, and uptake of neutral red. Genotoxicity was assessed by the liver micronucleus assay. Exposure to Y₂O₃ nanoflowers at concentrations lower than 100 mg L^?1 did not lead to any cytotoxicity or genotoxicity. At higher concentrations (200, 400, and 500 mg L^?1), cell viability decreased and induction of micronuclei increased (400 and 500 mg L^?1).     

Study on the quality and stability of compost through a Demo Compost Plant

This study is concerned with the performance of a Demo Compost Plant for the development of acceptable composting technology in Bangladesh. The Demo Compost Plant was setup at the adjacent area of an existing compost plant located at Khulna city in Bangladesh. Four different composting technologies were considered, where Municipal Solid Waste (MSW) were used as a raw material for composting, collected from the adjacent areas of the plant. Initially the whole composting system was conducted through two experimental setups. In the 1st setup three different types of aerators (horizontal and vertical passively aerator and forced aerator) were selected. For a necessary observation four piles, using only MSW as the input materials in the first three compost pile, the fourth one was the existing Samadhan’s compost pile. Based on the analysis of the experimental findings, the horizontal passively aerated composting technique is suitable for Bangladesh as it had better performance for reducing composting period than that of the others. It was being observed from the quality parameters of compost in the both 1st and 2nd setup that as the waste directly come from kitchen, degradation rate of waste shows a positive result for reducing this waste and there is no possibility of toxic contamination, when it would be used as a soil conditioner. Though there is no significant improvement in the quality of the final product in the 2nd setup as comparing with the 1st setup but it fulfills one of the main objectives of this study is to reduce the whole composting period as well as immediate management of the increasing amount of waste and reducing load on landfill. Selfheating tests reveal that degree of stability of compost with respect to maturation period was remained in the acceptable level, which was further accelerated due to the use of organic additives.     

Batch and continuous biosorption of Cu by immobilized biomass of Arthrobacter sp.

The ability of free and polysulphone immobilized biomass of Arthrobacter sp. to remove Cu²⁺ ions from aqueous solution was studied in batch and continuous systems. The Langmuir and Freundlich isotherm models were applied to the data. The Langmuir isotherm model was found to fit the sorption data indicating that sorption was monolayer and uptake capacity (Q^o) was 175.87 and 158.7 mg/g for free and immobilized biomass respectively at pH 5.0 and 30 °C temperature, which was also confirmed by a high correlation coefficient, a low RMSE and a low Chi-square value. A kinetic study was carried out with pseudo-first-order reaction and pseudo-second-order reaction equations and it was found that the Cu²⁺ uptake process followed the pseudo-second-order rate expression. The diffusivity of Cu²⁺ on immobilized beads increased (0.402 × 10⁻⁴ to 0.435 × 10⁻⁴ cm²/s) with increasing concentration from 50 to 150 mg/L. The maximum percentage Cu²⁺ removal (89.56%) and uptake (32.64 mg/g) were found at 3.5 mL/min and 20 cm bed height. In addition to this the Bed Depth Service Time (BDST) model was in good agreement with the experimental data with a high correlation coefficient (>0.995). Furthermore, sorption and desorption studies were also carried out which showed that polysulphone immobilized biomass could be reused for up to six sorption–desorption cycles.     

Dimethoate-induced oxidative stress and DNA damage in Oncorhynchus mykiss

The present study was conducted in order to investigate pro-oxidant activity of dimethoate in liver and brain tissues following sublethal pesticide exposure for 5, 15 and 30 d by using SOD, GPx, CAT enzyme activities and lipid peroxidation as biomarkers as well as DNA damaging potential via detecting% Tail DNA, Tail moment and Olive tail moment as endpoints in erythrocytes of Oncorhynchus mykiss in an in vitro experiment. Antioxidant enzyme activities were found to elicit two staged response which was an initial induction followed by a sharp inhibition in liver tissue while a sustained increase in GPx activity and slight stimulation in SOD activity were detected in brain tissue. Lipid peroxidation showed an ascending pattern throughout the exposure period in both tissues and a decreasing trend was determined in tissue protein levels which was proved to be positively correlated with duration. Similar findings were obtained from outcomes preferred to quantify DNA damage and TM was decided to reflect the extent of damage more sensitively because of determined positive correlation with concentrations applied. Considering these results, it can be concluded that oxidative stress condition evoked by dimethoate could not be responded effectively and genotoxic nature of pesticide was proven by determined clastogenic effect possibly via being an alkylation agent or stimulating the production of reactive species.     

Study on Properties of Poly(urethane-ester) Synthesized from Prepolymers of ε-Caprolactone and 2,2-Dimethyl-1,3-Propanediol Monomers and Their Biodegradability

Poly(urethane-ester) was prepared by polymerization of 4,4′-methylenebis(phenyl isocyanate) (MDI) and prepolymers of ε-caprolactone and 2,2-dimethyl-1,3-propanediol monomers P(CL-DP) with various chain lengths as polyol sources. Characterizations of poly(urethane-ester) were carried out by analysis of functional groups (FTIR), thermal properties (DTA/TGA), mechanical properties (Tensile tester), crystallinity (XRD), and biodegradability. The chain length of prepolymers used in polymerization has a significant effect in properties of poly(urethane-ester) as well as their biodegradability. The formation of poly(urethane-ester) was indicated by the presence of new absorption peaks at wave number of 3,348.2 and 1,596.9 cm^?1 for urethane (–NH–) and aromatic groups in chain of polymers, respectively. The increase chain length of prepolymer used in polymerization with 4,4′-methylenebis(phenyl isocyanate) was observed the increase thermal property and crystallinity of poly(urethane-ester). However, the maximum mechanical property and also biodegradability in activated sludge were observed in poly(urethane-ester) prepared by polymerization of 4,4′-methylenebis(phenyl isocyanate) (MDI) and P(CL-DP) prepolymers with DP/CL ratio of 1/20. Apparently, the amorphous parts of polymers are rapidly decomposed by enzymes of microorganisms, so the crystallinity on the whole of poly(urethane-ester) increases after incubation time of 30 days.     

Determination of nickel, copper, zinc and lead in human scalp hair in Syrian occupationally exposed workers by total reflection X-ray fluorescence

In this study, an attempt has been made to study methane flux and quantification of heavy metals from Municipal Solid Waste (MSW) landfill areas of selected cities in India. During the period of study, the average value of methane flux was estimated from these landfill areas varied from 146–454 mg/m2/h. Methane emission from landfill is of serious environmental global concern as it accounts for approximately 15 percentages of current Greenhouse gas emissions. It has been estimated that methane emission, from landfill areas in the world, in next two decades would be same as that what is emitted from paddy fields presently. Besides, the estimation of methane flux, quantification of some heavy metals was conducted to analyse the suitability of using MSW as compost. The average values for metals were observed to be both within the range of USEPA and Indian standards for MSW disposal in landfill areas and to be used as compost respectively.